errrmmmmm meant 45 lol wtf.. i must of been thinkin from the bottom of the door when its down to the top when its up... lmao
ok ive never been good at math so lets just say its tilted slightly backwards (not completely vertical) i hate thinking... i just made it work then *tried* to figure it out...i'm tired.. lol
[This message has been edited by AJ7 (edited 12-14-2005).]
those are basicly the same as decah...etc. and mine are made to go on the inside of the fender instead of the outside (slightly tucked in...we'll see though) about an inch above the hing... and it will open 20-30°... then almost straight up and down....
[This message has been edited by AJ7 (edited 12-15-2005).]
still waiting with money in hand ( and that is hard with a wife at this time of the year ) I don’t mean to push but I want my hinges
lol sorry but i should be able to start selling by the first of the year middle of Jan. at the latest..
mainly i have to work out the $$ to get started... good news is i think i actually have my final design and it should be working tomorrow. one of the problems is my friend doesnt have a vertical mill and that is one of the things i'll have to pay someone else to do... so i'll have to have money up front, otherwise i'd be able to start right away. you'll see why i need a vertical mill when i post pics tomorrow .. just used a plasma cutter and lots of grinding for the prototype, wont make them like that and sell them though..
I've never seen any like that, but they look like they will work. Good job! -Mark
thanx still have a few small changes (cosmetic), and i'll be ready to start makin them, going to do the arm part 3/8" thick all one peice if i can... and then round everything and make it look nice
Having some issues figuring out which is the left /right side there? ! lol Just kidding, well its not the prettiest hinge in the world, but hey if it does the trick! Just don't make it out of fiberglass ! lol
Having some issues figuring out which is the left /right side there? ! lol Just kidding, well its not the prettiest hinge in the world, but hey if it does the trick! Just don't make it out of fiberglass ! lol
no, URETHANE! lol... maybe
the next set will look better... if someone can find 3/8" and 1/4" sheets of titanium for me for a decent price i might consider still making them out of titanium... but i havent had any luck...
oh and i just found that board in my garage and it already said that on there...
[This message has been edited by AJ7 (edited 12-16-2005).]
Just post them on here.... upload them on cardomain, but don't put them on your page, just use the [ IMG ] tags and post them here...Besides, aren't we the ones that want to see them, not the camaro guys... Especially that one "Custom" camaro, with the massive spoiler .. haha
Just post them on here.... upload them on cardomain, but don't put them on your page, just use the [ IMG ] tags and post them here...Besides, aren't we the ones that want to see them, not the camaro guys... Especially that one "Custom" camaro, with the massive spoiler .. haha
i'll do it tonight if i have time, if not i'll do it in the morning..
IP: Logged
09:32 PM
Dec 18th, 2005
DOHC_SWAPPER Member
Posts: 365 From: Igloo, Toque, Canada Registered: Nov 2005
Those are the same pics as before :P, wheres the fiero to put them on? I am curious on how they will perform... Any ideas of where your (2) shocks will mount? I just don't see a place for them on your hinge, and make it tuck in under the fender... Its harder then it looks isn't it?
EDIT - Well I gave you a + for effort. Seems like you are at least trying! If I was a jackass in my previous posts, I will take that back. Now you just need a fiero
[This message has been edited by Custom2M4 (edited 12-18-2005).]
IP: Logged
01:24 PM
88White3.4GT Member
Posts: 1604 From: Hayward, CA Registered: Dec 2003
Those are the same pics as before :P, wheres the fiero to put them on? I am curious on how they will perform... Any ideas of where your (2) shocks will mount? I just don't see a place for them on your hinge, and make it tuck in under the fender... Its harder then it looks isn't it?
EDIT - Well I gave you a + for effort. Seems like you are at least trying! If I was a jackass in my previous posts, I will take that back. Now you just need a fiero
there will be a little more room on that arm for the struts to mount, one will be mounted towards the top of the wheel well in the fender and it will mostly help the door come down and there will be one below the hinge (by the bottom stock mounts) that helps it up and stay up (both help it stay up), both will be mounted in the middle part of the main arm on the hinge... they will perform well i used the strut idea from another kit that works really good..
Does the hinge automaticly swing in two different directions and stop itself from moving as its not suppose to (Going up before fully up, or etc) , or does it require your effort to push it out an up... Wondering because if you have a blond girl in the car and she just lifts the door with the window up it might hit the fender, or even the roof if she pulls hard enough..
Does the hinge automaticly swing in two different directions and stop itself from moving as its not suppose to (Going up before fully up, or etc) , or does it require your effort to push it out an up... Wondering because if you have a blond girl in the car and she just lifts the door with the window up it might hit the fender, or even the roof if she pulls hard enough..
ok well, i guess i will be using that design for sure now, just have to find the $$$ to get all of this started.... hopefully start selling next month. thinking of just sticking with steel... only gonna be able to get a couple sets the first week i sell them but after that i'll have plenty..
anyone have an idea how much it would cost to have those slots on the hinges milled out? thanx.
[This message has been edited by AJ7 (edited 12-21-2005).]
I'm very interested but will wait until I hear from some people who have installed them. The shipping, VAT and import duties add to the bill and once here, I can't easily ship them back if there something wrong. You can put me on the "2nd wave" list...