Went to Bryon Dragway today after finding some of the hp that the dyno in Daytona showed we lost. But the dyno also gave us an idea where to find it. We ran three times. The first being 11.556 @ 114.12 mph, the second 11.508 @ 114.59, and after some more adjustments we were able to run our best of 11.323 @ 116.4 mph with a 0-60' of 1.491sec. Didn't hit the 10s yet -- but getting closer. We need to dyno and tune at the same time now and we should find the hp we need to get there with the changes I made this winter.
See you all at the Dells!
Don
------------------ Too Far 60' - 1.497 sec 1/4 mi - 11.460 sec mph - 116.08
[This message has been edited by Don Kraus (edited 04-09-2006).]
hey, just went to rock falls raceway last sat. and got a new best 13.93 at 101 MPH, i was a 13.96 at 99 before, only thing differant is a custom short shifter i made. so if you could change that for me, that would be great. thanks
EDIT: hey Tina when are you going to be out there next? id love to see you race
------------------ 1986 Silver 5 speed Fiero 3.4 DOHC Bored .30,Fully balanced and blueprinted 13.9@99mph as it is on the street
355/380hp sbc, 4 bolt main spec stage 3, and many other extras. 87 GT 5-speed Getrag, power everything.
[This message has been edited by flames4me (edited 04-10-2006).]
Did a 15.56 @ 86 last fall.. Car is an 85GT 4 speed. Has a cold air intake with K&N.. That's about it for performance mods that I know about. The previous owner had ordered a bunch of fiero store stuff on the car, so there may or may not be some un-visible mods.....
It was on a beltronics accelerometer so I don't know if it counts or not......
[This message has been edited by fiero_silva (edited 04-19-2006).]
Hey thanks man. Thats an absolutly insane 60ft!!!!!!!!!
How do your axles hold that kind of force? And whats done to your tranny? Thanks mate.....you still having trouble with the front end lifting?
------------------ 1986 GT, LT1/4T60E Custom ground cam for the spray thats not in yet. http://hometown.aol.com/ptfiero/index.html On the forum https://www.fiero.nl/forum/Forum2/HTML/045554.
IP: Logged
07:04 PM
Mr. Pat Member
Posts: 1860 From: Melbourne, VIC Australia Registered: Apr 2003
HI Pat,I still lift the front end and have done everthing to stop it but put wheely bars on it.But then I keep adding power,the axles are stock believe it or not.The transaxle is all buildt up with extra clutch packs,Moser final drive,high preasures and 3.69 gears,the gears are the secret to not breaking cv joints,now everyone knows.
Don
------------------ Too Far 60' - 1.491 sec 1/4 mi - 11.323 sec mph - 116.40
[This message has been edited by Don Kraus (edited 04-22-2006).]
HI Pat,I still lift the front end and have done everthing to stop it but put wheely bars on it.But then I keep adding power,the axles are stock believe it or not.The transaxle is all buildt up with extra clutch packs,Moser final drive,high preasures and 3.69 gears,the gears are the secret to not breaking cv joints,now everyone knows.
Don
Higher gears help stop breaking? 3:69's arnt to light.
If you dont mind me asking, where did you get your trans? Was it built in a shop? Or did you buy it from intense.
[This message has been edited by Mr. Pat (edited 05-07-2006).]
IP: Logged
09:56 AM
Don Kraus Member
Posts: 662 From: Jefferson, WI USA Registered: Oct 2002
Mr.Pat,we buildt the transaxle ourselves,I have a friend that's an ASE mechanic and rebuilds transmissions,everything is beefed up that can be.The higher the gear ratio the easier and faster the engine will rev up putting less preasure on the drive line,it's a leverage thing.
Don
------------------ Too Far 60' - 1.491 sec 1/4 mi - 11.323 sec mph - 116.40
IP: Logged
10:51 AM
Jun 12th, 2006
PBJ Member
Posts: 4167 From: London, On., Canada Registered: Jan 2001
Two new entries, Same user name and car, different engines.
You already have.
Her86GT with the 4.9 turbo.
You are missing.
Her86GT with vin Y northstar-stock, turbo, 4T60 auto. best of 12.62 @ 109 mph Her86GT with 3800 s/c series II, stock mtr with 3.2 pulley, OBD1, 4T60 auto. best of 13.28 @ 104 mph
Thank you.
Pete
------------------
IP: Logged
03:16 PM
Jun 13th, 2006
Matt Hawkins Member
Posts: 586 From: Waterford, MI Registered: Oct 2000
Can I be part of the 11 second club? Pleeeeeeeaassse LOL I see you updated the time, but didn't move me up the list. Whenever you get around to it. Thanks.
Oh and 2.8" pulley.
[This message has been edited by LFiero67 (edited 06-23-2006).]
IP: Logged
01:13 AM
DrCPU Member
Posts: 708 From: North Dumfries, On, Canada Registered: Jan 2004
Car: 88 Formula Engine: 3800 SC series 2, auto trans Time: 14.51 @ 94 MPH
WOW--Seems like either the swap has some issues or maybe just a first time driver. That is a horrible time for a S2 3800SC on the auto. What was the main hold back?
WOW--Seems like either the swap has some issues or maybe just a first time driver. That is a horrible time for a S2 3800SC on the auto. What was the main hold back?
My first time on a dragstrip was last month. I have about 20 passes on an 1/8 mile but last night was the first on a 1/4 mile.
What is a good time for a bone stock 3800SC II auto?
Any tricks to speeding up my time (other than mods)?
here is mine. 12.8 @ 108. SC3800. I got one run after driving 40 miles to the track in 97 degree weather. Let it sit for a hour after the first run and shattered the getrag shifting from 1st to second.
well its been a blast guys! im so glad i got to be up there with you all hitting 11's was a blast and its nice to see my goal was reached....to bad it cant continue on. the crazy thing is....the car is quicker than an 11.97....our estimates when we do the math are maybe as low as 11.75 maybe more....oh well, guess we'll never know *sigh*
anyways, soulcrusher, please put a * besides my name on the list where i am, as "RETIRED" lol, thanks!
IP: Logged
03:27 PM
Aug 4th, 2006
FieroGTguy Member
Posts: 3087 From: Indianapolis , IN Registered: Mar 2001
well its been a blast guys! im so glad i got to be up there with you all hitting 11's was a blast and its nice to see my goal was reached....to bad it cant continue on. the crazy thing is....the car is quicker than an 11.97....our estimates when we do the math are maybe as low as 11.75 maybe more....oh well, guess we'll never know *sigh*
anyways, soulcrusher, please put a * besides my name on the list where i am, as "RETIRED" lol, thanks!
Why the demod?
Greg
------------------
[This message has been edited by FieroGTguy (edited 08-04-2006).]