My other crew member ended up breaking his driver axle, and slightly twisting the pass side axle. No real damage was done, I had a pile of axles at the shop here. its almost 3am, and its fixed 100%, so he will be at waterford hills here in a few hours. I might be sleeping in a bit.
IP: Logged
02:40 AM
darkhorizon Member
Posts: 12279 From: Flint Michigan Registered: Jan 2006
**That car's a total POS! You could never build anything half as fast as mine. You'll never put up a timeslip or video because you're too embarrased little boy. You're a pretender, a troll, and just jealous of my awesome adapter plates. They're an engineering marvel. I've contributed more to the Fiero community than anyone ever. Just don't try to talk to me, or ask me questions. You could have brought your car to me and run 13's for only $10k more and it'd be much better. I'm gonna go prove it by rolling my stuff on and off a trailer now. Remember, axles don't break, if you break an axle I'll personally come replace it.
Love, Archie**
Just posted the above for you since I figure this will be the first time Archie won't be posting this crap right after you make a post, and I know you're used to seeing it. I don't want the status quo to change or anything like that LOL.
Its too bad that 400+ crank HP Pennsylvania car didn't make a pass. It would have been nice to see another 11 second transverse Fiero.
**That car's a total POS! You could never build anything half as fast as mine. You'll never put up a timeslip or video because you're too embarrased little boy. You're a pretender, a troll, and just jealous of my awesome adapter plates. They're an engineering marvel. I've contributed more to the Fiero community than anyone ever. Just don't try to talk to me, or ask me questions. You could have brought your car to me and run 13's for only $10k more and it'd be much better. I'm gonna go prove it by rolling my stuff on and off a trailer now. Remember, axles don't break, if you break an axle I'll personally come replace it.
Love, Archie**
Just posted the above for you since I figure this will be the first time Archie won't be posting this crap right after you make a post, and I know you're used to seeing it. I don't want the status quo to change or anything like that LOL.
Its too bad that 400+ crank HP Pennsylvania car didn't make a pass. It would have been nice to see another 11 second transverse Fiero.
Originally posted by darkhorizon: Nobody is trolling my drag day thread, I ran a 12.2.. and nobody cares... What a day for a slow day Although I did hang out with 30+ pffers at track day today.
God your slow :P but seriously nice run. Whatcha done to the motor?
IP: Logged
01:35 AM
Pyrthian Member
Posts: 29569 From: Detroit, MI Registered: Jul 2002
Damn - this laptop can't view the avi file (only gets sound) Sorry I missed out but I'll be down tomorrow.
Ryan
I am having the same problem - cant see anything on any of the AVI files..... is there a certain player I should use? I see some people can see them just fine.....
IP: Logged
10:07 AM
RWF Member
Posts: 366 From: Brevard, NC. USA Registered: Apr 2002
Originally posted by RWF: Right click, save target as, and open from there...worked for me
I did that what player played it? my windows media player just comes up, and gives me sound, but no video.....same if I try to open with WinAmp I can watch the FLV that was posted
IP: Logged
10:39 AM
Fierobsessed Member
Posts: 4782 From: Las Vegas, NV Registered: Dec 2001
Stupid Windows media player does NOT support .AVI anymore. I don't understand that either. It has supported it since windows 95. Perhaps its a "protected content" issue or something. Microsoft has become anti-customer in the past couple of years.
IP: Logged
10:44 AM
PFF
System Bot
RWF Member
Posts: 366 From: Brevard, NC. USA Registered: Apr 2002
Thats what happened to me to, I saved them to my desktop and they are windows media files and WMP plays them. I right clicked on the file in the thread and saved as....
IP: Logged
10:47 AM
Tom Slick Member
Posts: 4342 From: Alvarado, TX Registered: May 2003
Originally posted by Pyrthian: I did that what player played it? my windows media player just comes up, and gives me sound, but no video.....same if I try to open with WinAmp I can watch the FLV that was posted
mine WMP did the same thing, had to download something about xvid. now it works.
[This message has been edited by Tom Slick (edited 07-25-2008).]
IP: Logged
10:50 AM
Pyrthian Member
Posts: 29569 From: Detroit, MI Registered: Jul 2002
Sorry guys, I thought xvid was a pretty standard codec these days. I use WinAmp myself, and if it doesn't get the codec on it's own, I believe you can get it at www.divx.com
I honestly forgot, because my 60ft was a tad bit slower than what I run with street tires. They were just something I had, and used them because I had a very limited amount of runs to get street tires off the line that fast.
Now if I post up an 11 here in the next month, I will credit traction to that.
IP: Logged
05:06 AM
Jul 29th, 2008
blakeinspace Member
Posts: 5923 From: Fort Worth, Texas Registered: Dec 2001
It was a nice day out there... a lot more crowded than our local tracks.
Mosquitoes sucked all the life force out of me when the sun went down.
Nice meeting you Soctt (DH). Got to meet Christian (bigfieroman)... both of you are all right in my book.
NTFC was out there supporting our club member Daniel, (Green87), that ran a new PB with 13.5 He did not really beat on the car too much... 1300 mile trip home, ya know.
The night was so cool, and the line so long, he never got good heat built up in his drag radials.
NTFC attended this real well with me, mstngsbware, Daniel, and custom84cp... checking out the scene. How is it that more people from Texas made this than locals???
Good to meet you Pyrthian... thanks again for loaning me your jack at Waterford!
IP: Logged
06:27 PM
PFF
System Bot
darkhorizon Member
Posts: 12279 From: Flint Michigan Registered: Jan 2006