Any progress on the GT4T look-a-like dash you mentioned, to fit the stock interior cars? Or are you waiting for your clone to show up to finish that project?
Russ
IP: Logged
09:37 PM
Archie Member
Posts: 9436 From: Las Vegas, NV Registered: Dec 1999
I thought I should bring this thread up to date on a few of the other things that have been going on at Archie's in the last few weeks.
This car just left for home today........You may have seen it last year at the FieroRama. It was powered by a 4 cylinder 5 speed. Don't pick on him anymore, now it has an LT1.
Archie
IP: Logged
09:38 PM
Archie Member
Posts: 9436 From: Las Vegas, NV Registered: Dec 1999
Any progress on the GT4T look-a-like dash you mentioned, to fit the stock interior cars? Or are you waiting for your clone to show up to finish that project?
Russ
The Clone would be helpful.
Actually I have a "secret" dash project that the glass guy started pulling molds off of today. Then the dash your talking about is next.
Archie
IP: Logged
09:41 PM
Oreif Member
Posts: 16460 From: Schaumburg, IL Registered: Jan 2000
I thought I should bring this thread up to date on a few of the other things that have been going on at Archie's in the last few weeks.
This car just left for home today........You may have seen it last year at the FieroRama. It was powered by a 4 cylinder 5 speed. Don't pick on him anymore, now it has an LT1.
Archie
Hey Archie, do you have any more pics of the front nose from a side angle?
Questions: How much futher-out does the front clip stick-out comparred to the stock GT front fascia? Can a person buy just the front piece including part of the side fender and hood? Do you have any close-ups of the hood raised and from underneath it?
Thanks madcurl
IP: Logged
02:16 PM
NotAFieroAnyLonger Member
Posts: 4413 From: 75762/Texas/USA Registered: Dec 2003
Hey Archie, do you have any more pics of the front nose from a side angle?
Questions: How much futher-out does the front clip stick-out comparred to the stock GT front fascia? Can a person buy just the front piece including part of the side fender and hood? Do you have any close-ups of the hood raised and from underneath it?
Thanks madcurl
Must be for #3.. lol
------------------ Custom Built -- W I D E B O D Y-- GT!! One of One!! *Under~Surgery*
IP: Logged
11:24 PM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
noticed on the top of page 17 that they were using whay looked to be regular fibreglass to do the red GT chop top... how does that stick and if it isnt fibreglass with regular resin then what is it???
thanks Matt
IP: Logged
01:20 AM
SaskatoonFiero Member
Posts: 290 From: Saskatoon, Saskatchewan, Canada Registered: May 2003
Hey Archie, do you have any more pics of the front nose from a side angle?
Questions: How much futher-out does the front clip stick-out comparred to the stock GT front fascia? Can a person buy just the front piece including part of the side fender and hood? Do you have any close-ups of the hood raised and from underneath it?
Thanks madcurl
The front over hang on the Finale is actually 4" shorter than the stock Fiero GT nose.
I don't have any pics of the underside of the hood that I can think of, but I'll see if I can find some.
I can sell the front clip & hood seperately. However, the width of the trailing edge of the front fenders is about 2" wider than the stock door panels so something has to e done to blend them in.
Archie
IP: Logged
11:34 PM
Aug 15th, 2004
NotAFieroAnyLonger Member
Posts: 4413 From: 75762/Texas/USA Registered: Dec 2003
I'd like to see the finale as a front only kit. I like what they did on the nose, but the sides and back are horrible imo. A nose only finale with the IRM rockers, and a chop top would kick ass. Someone PS that plz. Throw in some cool wheels if ya can.
IP: Logged
05:53 AM
AusFiero Member
Posts: 11513 From: Dapto NSW Australia Registered: Feb 2001
Sorry Archie, couldn't help myself. Ever considered anything like this? Cheers Jim
Editted to add the obligatory choptop version.
Wow, that looks GREAT!!!!!!
You just added another car to the long list I call "Projects I have to do".
I hate you!
The funny thing is that Friday, before we left the shop for the weekend Rob, Kris & I were talking about what our next project would be & we discussed a Finale Roadster.
I can't wait to show them these pics Monday.
Archie
IP: Logged
09:43 AM
AusFiero Member
Posts: 11513 From: Dapto NSW Australia Registered: Feb 2001
Glad you like them Archie. I for one would love to see that built. It takes the Finale to a whole new level. Plus think of all the potential Solstice owners you could steal off GM
You just added another car to the long list I call "Projects I have to do".
I hate you!
The funny thing is that Friday, before we left the shop for the weekend Rob, Kris & I were talking about what our next project would be & we discussed a Finale Roadster.
I can't wait to show them these pics Monday.
Archie
LOL - I'd love to see a finale roadster..
IP: Logged
10:30 AM
PFF
System Bot
Archie Member
Posts: 9436 From: Las Vegas, NV Registered: Dec 1999
Glad you like them Archie. I for one would love to see that built. It takes the Finale to a whole new level. Plus think of all the potential Solstice owners you could steal off GM
Do you have any more views from different angles? Like a view that shows the headrest decklid area.
Archie
IP: Logged
07:08 PM
AusFiero Member
Posts: 11513 From: Dapto NSW Australia Registered: Feb 2001
If you can get me some good shots from the back, slightly above and from the back 1/4 view and an overhead shot I can show you what I had in mind.
OK, Have a bunch of pics from different angles of Finales' but not of this yellow one. I hope you're thinging of a between the seats body colored waterfall and narrow headrests & seat backs.
Here are a few more pics.
Archie
IP: Logged
08:10 PM
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
Archie, WAZZZUUUPPP !! by the way nice job on all those beautiful cars. I have talked to you over the phone and now i feel stupid....i ask you about a quad 4 LMAO...anyway, I just wanted to say something about the chop top fiero,
It looks great But, Do you realize how many times i would bust the back of my head on that thing????!, anyway man great work, maby someday soon i will scrap up the cash to buy some rocker pannels off of you.. well,
c ya
---Tim--- 85se 4cyl 5speed
IP: Logged
05:33 AM
virii01 Member
Posts: 515 From: Lincoln, NE, USA Registered: Mar 2003
Originally posted by Boonch:...anyway, I just wanted to say something about the chop top fiero, ...someday soon i will scrap up the cash to buy some rocker pannels off of you ---Tim--- 85se 4cyl 5speed
I did both, believe me you won't regret it. If you haven't checkout out the PFF Spyder build up in tech go there now. I almost missed it.
- Jonathan
IP: Logged
01:56 PM
TaurusThug Member
Posts: 4271 From: Simpsonville, SC Registered: Aug 2003
Would there be anyway of taking the hatch piece from a Finale body kit and putting it onto a stock fiero body? I think the idea of a stock looking fiero wtih a hatch and window would be a great idea. Kinda like ferrari's (the 360 modena and F355 in mind) and just have a showcase for the engine...just wondering
-Coop
IP: Logged
02:36 PM
virii01 Member
Posts: 515 From: Lincoln, NE, USA Registered: Mar 2003
It's an LT5 out of the C4 Corvette ZR1. DOHC 32 Valve V8 designed in cooperation with Lotus, built by Mercury if I remember right. Basically one of the rarest motors to go in the Vettes, with ZL1s.
IP: Logged
02:43 PM
bryson Member
Posts: 737 From: Mt. Pleasant, SC, USA Registered: Sep 2002
I love that engine! I wish I could get my hands on one of those to build up a little Man...I can only imagine. Let us know what's happening with it Archie! --Bryson
IP: Logged
03:16 PM
Archie Member
Posts: 9436 From: Las Vegas, NV Registered: Dec 1999
Archie, WAZZZUUUPPP !! by the way nice job on all those beautiful cars. I have talked to you over the phone and now i feel stupid....i ask you about a quad 4 LMAO...anyway, I just wanted to say something about the chop top fiero,
It looks great But, Do you realize how many times i would bust the back of my head on that thing????!, anyway man great work, maby someday soon i will scrap up the cash to buy some rocker pannels off of you.. well,
c ya
---Tim--- 85se 4cyl 5speed
Sorry, this is the only thing I know about 4 valve engines.
Archie
IP: Logged
09:25 PM
Aug 30th, 2004
Alex4mula Member
Posts: 7403 From: Canton, MI US Registered: Dec 1999
