great work like always, thanks for touching that up for me... im still somewhat of a novice at painting and such in photoshop and this monitor is way to dark
so... let me give it another shot for bubbajoe
------------------
1988 3.8sc
IP: Logged
07:22 PM
riley Member
Posts: 965 From: Saskatoon, SK, Canada Registered: Feb 2004
bubbajoexxx, Great work I love this car. You have some really inovative ideas keep it up! I have my exhaust routed out like your planning, I think it will look really crazy! You will have to cut the trunk, but you can retain quite a bit of space redoing the sheet metal. Basically just a shorter version of the stock trunk.
Mines not done but, here is an example how you can cut the stock fascia, keeping along the lines of the original. Keeping the license plate area and the natural curve under it that attaches to the supports on the rear cross bumper. If you retain the plastic support underneath the cross bumper, the fascia will still be secure.
I am assuming you are going to shorten the trunk, but maybe you have another plan? Anyway's I cant wait to see how you finish the rear, these are some really cool photoshops!
Travis
Am I forgetting something? Didn't bubba already lose his trunk?
IP: Logged
08:30 PM
F-I-E-R-O Member
Posts: 8410 From: Endwell, NY Registered: Jan 2005
Hey Zmau86, you can't fill in the space under the license plate. When he's done with the car (?) he'll probably start a matching trailor to go with it, where's the hitch gonna go?
IP: Logged
08:32 PM
Oct 20th, 2005
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
with all the ideas I will be going all winter with fiberglass with the new skirts new rear bumper and front air dam plan on sectioning a Z24 front bumper lower section onto the stock 87 fiero front bumper to form the air dam
IP: Logged
05:48 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
Hey Zmau86, you can't fill in the space under the license plate. When he's done with the car (?) he'll probably start a matching trailor to go with it, where's the hitch gonna go?
D'OH
heres another quick try I did at school
IP: Logged
01:42 PM
Mulholland_GT_Racer Member
Posts: 387 From: Iowa City, IA USA Registered: Aug 2005
with all the ideas I will be going all winter with fiberglass with the new skirts new rear bumper and front air dam plan on sectioning a Z24 front bumper lower section onto the stock 87 fiero front bumper to form the air dam
How would you do that? I'm trying to imagine the Z24 airdam on the Fiero.
-Mulholland
------------------ 1986 GT Getrag 5-speed
MULHOLLAND GT
IP: Logged
02:51 PM
PFF
System Bot
Erik Member
Posts: 5625 From: Des Moines, Iowa Registered: Jul 2002
How would you do that? I'm trying to imagine the Z24 airdam on the Fiero.
-Mulholland
using urathane and leaving tabs on one piece and making matching slots on the other then bund the area where it meets with urathane then finsh it off with flexable bumper reair
IP: Logged
04:58 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
this desine is realy starting to take shape and getting less complicated to build
Cool. That was my goal when I configured it ..I tried to put myself in your place so I could make it easier if it were I that was going to be building this but still have it come out with some flavor of the Fiero lines. I figured you could make the panels flat where the reflectors are located on the 87 88 coupe rearend instead of the graduated recess that is on the stock panel and just build housings for the reflectors. edit: I guess an Aero rear would acomplish that without having to fill in the graduated recesses of a 87-88 coupes relector housings :/edit That seemed to me to be a cleaner design that would fit well with the rear lower valance. A flat plane across the lower valance recess would in my opinion be easier to construct as well
[This message has been edited by Erik (edited 10-22-2005).]
keep em commin have not made ymine up totaly yet but have started to buy the material to make every thing up just lookin for the 88 89 z24 bumper skin to do the front
IP: Logged
08:38 PM
AntiKev Member
Posts: 2333 From: Windsor, Ontario, Canada Registered: May 2004
yes pics of the new camera ..screw the car lol jk ...theres some snow up here but i think next week its like going up to 10C i believe ..so the snow should be gone and then pics should be coming right
matt
IP: Logged
06:29 AM
PFF
System Bot
1fastcaddy Member
Posts: 618 From: Hays, Kansas Registered: Oct 2004
I have been loosely following your build-up and Ive got to say, this is an amazing machine! I hope you destroy some exotic A$$ next summer. I have just started buildin a mini-dune buggy, my dream is to step up to tube frame cars! thanks for your inspiration. I will continue following your build thread for ever just because it is the thread that never ends, yes it goes on and on my friends. I will.... hehe, had to do that. laters
------------------ Soon to be custom port fuel injected with Megasquirt! 4.5l and th-440 And Im only 18. think about when Im 30!!
IP: Logged
02:06 PM
Dec 4th, 2005
fieroman87 Member
Posts: 647 From: Lancaster, PA Registered: Nov 2003
1985 2m4 Saskatoon, Sask Canada Visit the Saskatoon Fiero Club Website at http://www.freewebs.com/saskatoonfieros/ Come chat with us at our Forum http://saskfiero.suddenlaunch.com/
IP: Logged
07:55 PM
Dec 13th, 2005
mr.tourismo Member
Posts: 48 From: Ottawa, Ont, Canada Registered: May 2004