DAMN! I only posted that pic so that I could get page 51!!!!!! I didn't really care... After I posted the comment, I was thinking DVD myself but wasn't sure how computer savy you were...
IP: Logged
11:38 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
DAMN! I only posted that pic so that I could get page 51!!!!!! I didn't really care... After I posted the comment, I was thinking DVD myself but wasn't sure how computer savy you were...
spend as much time workin on the computer as i do on the car web sites to keep up to date
IP: Logged
11:45 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
DAMN! I only posted that pic so that I could get page 51!!!!!! I didn't really care... After I posted the comment, I was thinking DVD myself but wasn't sure how computer savy you were...
buy the way the badges are looking good
IP: Logged
11:47 PM
Dec 13th, 2006
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
If you make your own wires be sure that each pair on each coil are exactly the same length as you are using a wasted spark system and each pair of wires need to have the same resistance or you will have ignition misses
IP: Logged
08:58 PM
PFF
System Bot
Dec 16th, 2006
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
If you make your own wires be sure that each pair on each coil are exactly the same length as you are using a wasted spark system and each pair of wires need to have the same resistance or you will have ignition misses
Thanks. I've always wanted the colored type like yours and Keith's Orange N*
IP: Logged
10:53 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
the breathers and plug covers on the car and started the ram air setup in the rear deck lid fresh air into the brreathers will be supplied via the rear deck vents plumbed directly into the breather snorkles
IP: Logged
06:14 PM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
Bob, I'd like to suggest that you make a vent similar to what Skitime did with his decklid like this...
my deck has a slight curve to it and a flat vent will not fit also there would be to much of the steel aprin removed and cause the deck to twist when opened
IP: Logged
11:26 PM
Dec 18th, 2006
doublec4 Member
Posts: 8289 From: Oakville, Ontario, Canada Registered: Jun 2003
the breathers and plug covers on the car and started the ram air setup in the rear deck lid fresh air into the brreathers will be supplied via the rear deck vents plumbed directly into the breather snorkles
it is looking DAMN good.
IP: Logged
02:16 AM
Bobert Member
Posts: 371 From: Toronto, Canada Registered: Jan 2002
got a few more parts to come in then back to work on the electric vacuum brakes and the new air duct to the deck vents will be starting on tuesday and will post the progress .
i must give you props for a wonderful engine bay, can i give you some advice if youre not already planning it? get some color on those headers.... crome or some kind of paint. man you got one hell of a nice looking engine and some rusty looking headers, ha mine are getting there too, lol. but its spendy. also are you planning to go with some other engine bay walling? it looks like oyu have 3 different types of walls in there, maybe just flat sheet metal and painted?
IP: Logged
05:57 AM
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
i must give you props for a wonderful engine bay, can i give you some advice if youre not already planning it? get some color on those headers.... crome or some kind of paint. man you got one hell of a nice looking engine and some rusty looking headers, ha mine are getting there too, lol. but its spendy. also are you planning to go with some other engine bay walling? it looks like oyu have 3 different types of walls in there, maybe just flat sheet metal and painted?
have all the material to finish the engine bay in 1/8 perf aluminum and a can of heatcast to do the headers in to clean them up just have to get every thing just right then I will finish the engine bay off completely just waiting for the last 2 orders from ebay to come in
IP: Logged
02:16 PM
Jan 11th, 2007
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
Its gotten pretty cold around here, I dont know where bubba works on his stuff, but I know if it was me I wouldn't be making much progress. Too firggin cold to go outside
IP: Logged
12:28 PM
PFF
System Bot
BH2OFiero Member
Posts: 136 From: Bridgewater, N.S., Canada Registered: Jan 2007
Wow...it just took me 6.5hrs and 8 beers to read this thread from start to finish...I hate dailup. This is coming along great. I remember seeing this thread when I first joined the forum under a different username and thought it was a stupid idea...and I am very glad to be corrected. It's nice to see another Canadian doing something extreme with their Fiero. If I ever get up to Ontario I'll be sure to drop you a line and check it out. A + job.
-Caleb
------------------
IP: Logged
05:35 PM
bamman Member
Posts: 314 From: Brooklyn, Nova Scotia, Canada Registered: Mar 2003
Well Bubbajoe, I hope you know that you should go for a little (lol) drive with this car in July. Say down to the summer atlantic nationals, in Moncton, N.B. It would be a nice center piece for the couple fiero's that show up there. I too hope to see your car in person some day.
IP: Logged
06:35 PM
Feb 8th, 2007
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
just finished building my new computer and been inside out of the cold as I work outside on the car , finished getting the parts together for the electrc vacuum brakes and to beet all got my daily driver totaled tthis morning some in the east lane decided to make a left into my west bound lane .
here are the pics of the bake parts
IP: Logged
04:32 PM
Feb 9th, 2007
Scythe Member
Posts: 1055 From: Burke, Virginia Registered: Apr 2003
just finished building my new computer and been inside out of the cold as I work outside on the car , finished getting the parts together for the electrc vacuum brakes and to beet all got my daily driver totaled tthis morning some in the east lane decided to make a left into my west bound lane .
here are the pics of the bake parts
Hell, Lets see some computer pics
IP: Logged
10:17 PM
Feb 10th, 2007
bubbajoexxx Member
Posts: 1630 From: Ontario Canada Registered: Aug 2003
here you go Intel D 3.4 ASUS P5WDH deluxe mother board ! tera byte in hard drives 4 gig memory dvd rom dvd burner liquid cooling with 3 rads ultra silent XFX 7600GT 512 video card 600 w power supply and more
and for the ultimate comfort while on pennock's a fiero chair
as you can see Bob and I built a new top for the desk last night
[This message has been edited by bubbajoexxx (edited 02-10-2007).]
IP: Logged
01:57 PM
Dennis LaGrua Member
Posts: 15526 From: Hillsborough, NJ U.S.A. Registered: May 2000
Amazing project but what is the reasoning behind using ancient and outdated carburetor technology on a high tech Northstar engine? Carburetors are inefficient and such a system provides no engine management fuction.
Amazing project but what is the reasoning behind using ancient and outdated carburetor technology on a high tech Northstar engine? Carburetors are inefficient and such a system provides no engine management fuction.
becuase 4 carbs are cool.
IP: Logged
05:27 PM
Daviero Member
Posts: 382 From: Thunder Bay, ON Canada Registered: Jan 2006