I've been wondering about alternative instruments for an updated Fiero dash. This Cavalier pod keeps coming to mind because it seems to be a relatively simple swap that doesn't cost too much & it actually works. It's cool looking; sort of reminding me of an 80's Knightrider.
WHERE DO I FLIPPIN GET ONE!!!!!!!!!!!!!!!!!!!!!11
IP: Logged
01:30 AM
PaulJK Member
Posts: 6638 From: Los Angeles Registered: Oct 2001
Anyone interested in an Fi355 interior w/ black & tan leather upholstery NEW-IN-BOX? One of my customers has to let go of all his Fiero/355 kit stuff. Send me a PM if interested in contact info.
IP: Logged
12:45 PM
Nov 12th, 2008
iNVisionPROTOTYPES Member
Posts: 93 From: Niagara Falls, Ontario, Canada Registered: Oct 2008
Very clean job. I'm trying to determine if that is a Fiero. Defrost screen, steering column & wheel look familiar.
Thanks! You're right, except for the custom moulded horn button and the key hole has been shaved and relocated into the dash while still retaining the column lock. I could never get used to pressing that lever to extact the key.
------------------ 1986 Pontiac Fiero SE 3.4L | The Fiero Blog (Since April 2000) ----------------------------------------------------------- My Portfolio site | JustinChristie.ca
IP: Logged
04:24 PM
Nov 18th, 2008
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
I just returned from doing an interior install in Ft. Lauderdale over the weekend. Despite running into a web of electrical issues ( related to previously installed keyless entry & also security system, with NO owners manual ) the install took us three full days to complete. However, the car was not used for quite some time & wouldn't start. Ignition spark was present, so I suspect it is a problem with the fuel pump which could not be heard priming before start-up. .
IP: Logged
01:07 PM
fieroboom Member
Posts: 2132 From: Hayden, AL (BFE) Registered: Oct 2008
I was looking at chin spoilers and came across this 550 Mranello interior. I couldn't help notice how similar in proportions & feature placements are to the Fiero interior. I'll bet if this was super imposed over the Fiero interior it'll be strikingly similar. Look how similar the instrument arrangement is. The door handles as well.
I just returned from doing an interior install in Ft. Lauderdale over the weekend. Despite running into a web of electrical issues ( related to previously installed keyless entry & also security system, with NO owners manual ) the install took us three full days to complete. However, the car was not used for quite some time & wouldn't start. Ignition spark was present, so I suspect it is a problem with the fuel pump which could not be heard priming before start-up. .
So is that you or the owner
IP: Logged
12:02 AM
PFF
System Bot
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
He's the happy owner in Florida. I forgot to take a shot of the engine bay but it has a 3800sc/ 4T65eHD and the paint is fresh. The car will need to be detailed & get a new boot cover to match. It would've been nice to take it out for a test spin, but the motor wouldn't start...probably due to a faulty fuel pump. .
IP: Logged
01:29 PM
whodeanie Member
Posts: 3819 From: woodstock,Ga.,USA Registered: Jan 2008
Nice job Rob! it looks great. I still need to get with you on parts for my car. mine is taking longer than I thought but I will get the parts from you as soon as I can. been working on the body trying to get that done then I will contact you for the parts I need.
IP: Logged
01:49 PM
Nov 22nd, 2008
RCR Member
Posts: 4409 From: Shelby Twp Mi Registered: Sep 2002
Bob, Nope, this is a car in that was sitting around for some time after returning from Fastfieros. It has a fresh 3800sc swap, but we couldn't get it to start. I think the fuel pump wasn't running; we couldn't hear it turn on with the ignition. Hopefully it's just an electrical connection issue & not a bad pump.
[This message has been edited by Amida (edited 11-22-2008).]
IP: Logged
11:17 AM
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
Nice job Rob! it looks great. I still need to get with you on parts for my car. mine is taking longer than I thought but I will get the parts from you as soon as I can. been working on the body trying to get that done then I will contact you for the parts I need.
Projects always seem to take 2-3 times longer than you initially expected. Holiday season is full of distractions that always slows my work down.
IP: Logged
11:38 AM
Nov 30th, 2008
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
On the Fi40 dash project. Here is the fresh mould for the gauge trio holder, and a shot showing the progressive gauge angles to provide better viewing from the drivers seat.
[This message has been edited by Amida (edited 12-01-2008).]
Amida! I was keeping it a secret Car is an '86 GT - White/ Black trim 3400 v6 '88 rear susp. with coilovers Jimmy S GT1 scoops And of course this awsome front from you. Haven't found the right wheels yet but, yes, they will a be black 18/19 combo. Any sugestions? The inspiration for the car is the 355 Challenge cars. So I want a light 1pc five spoke design. Oh, and in case anyone is wondering Amida is a great guy to do business with.
IP: Logged
05:20 PM
PFF
System Bot
Dec 5th, 2008
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
This is the car that inspired the look I'm going for. Except with black or gunmetal wheels
Anyone got any wheel suggestions. Looking for 18x7.5 or 8 Front, 19x8 or 9 with 35mm offset. I would also consider a 17/18 combo if the wheels only came in those sizes.
IP: Logged
01:29 PM
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
Ford scorpion lights fit well without modifying the pockets. The Scorpion was not available in the States however so they must be shipped from Europe. .
This is a finished grill just pulled from the oven. It's made from 1/4" ABS sheet that is cut with a template on a router table using straight & round bits. The slats are sloted then placed in an alignment jig then welded together with plastic solvent Final finish coating is with SEM satin black & adhesion promoter. It looks just at good as the factory piece.
Amida.. LOVE your work.. would it be possible for me to purchase your grill, and what is the price? Price for the shine pegasus in picture? Do you have any measurements of length and height, i think my "mouth" is smaller than your version, so I can cut the edges a little bit to make it fit !?
Amida.. LOVE your work.. would it be possible for me to purchase your grill, and what is the price? Price for the shine pegasus in picture? Do you have any measurements of length and height, i think my "mouth" is smaller than your version, so I can cut the edges a little bit to make it fit !?
I just sold the last grill that I had, but I'll have a machine shop do another batch in about 2-3 weeks. Measures 29" x 5". Assuming the the machining cost is the same, the grill option is $95.00+shipping, but will know for sure when I get a quote from the machine shop.
Thanks.
IP: Logged
04:34 PM
Dec 19th, 2008
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
Work outside in the unheated shop is at a near standstill in sub-freezing weather. I can get 5 minutes out of my air tools before the air lines clog with ice. But, here's a cool winter shot.
IP: Logged
06:42 PM
Dec 21st, 2008
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003
Here's good reminder to test fit your new parts before committing to paint. I've had this pic in my files for a couple of years to remind myself of what can happen if things go un-checked.
IP: Logged
11:48 AM
Jan 5th, 2009
Amida Member
Posts: 2355 From: Seattle, WA. USA Registered: Jul 2003