Sorry everyone has to pick on the language of a fellow Fiero enthusiast but your work speaks for itself and they should try speaking your language.
Pozdravleniya za rabotata, koyato si svarshil. Dizaina na kolata ti (Fiero) e prekrasen. Ochakvam s netarpenie da vidia sledvashtata ti hudojestvena izrabotka. (Jena mi prevede tova za men)
PM Sent
IP: Logged
06:12 PM
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
Gotta love those "Arches" as they wrap around the Celica headlamps. The Celica headlamps may be the cheapest/under-rated production lights on the market but, they do "set-off" the front end on a Fiero. Until a production car makes them (elongated) will have to wait it out, hehe.
[This message has been edited by madcurl (edited 02-13-2007).]
Hi people, I'm not upset with enybody,and I got the criticesum
I will do my best with my spelling, you do your best to understand me , I'll love to talk about cars ,hoods , bumpers & money [ he he he ]
Any ideas on a new enterior ?............ Dos enybody has ever tried a Dodge Stelt one , so I don't copy anybody !
I'm open for busines , just bought another GT .
Thank YOU for the suport .
Bobby
my wife had a 2002 dodge stratus and I thought the interior would fit very well into the fiero - if you can make a stealth or stratus based interior i'd be interested
[This message has been edited by Kohburn (edited 02-14-2007).]
IP: Logged
12:27 PM
creator Member
Posts: 60 From: Englewood , Fl Registered: Jan 2007
how much for that car... I want one primer it flat black and put some "steelies in black" on it and you can assimilate with the ricers and then eat em with superior cubes and mods to good old huge engines
IP: Logged
03:38 AM
creator Member
Posts: 60 From: Englewood , Fl Registered: Jan 2007
So far I have 1840 hr work on the car, 7200 Us dollars for the chop , 3812 for fiberglass and parts, engine for 4950 dollars that have to be install, and I neath to do breaks, rems , tires ,interior , electric work and paint. Maybe You can help me with the prise? Thank You for the interest. With regards-- creator
So far I have 1840 hr work on the car, 7200 Us dollars for the chop , 3812 for fiberglass and parts, engine for 4950 dollars that have to be install, and I neath to do breaks, rems , tires ,interior , electric work and paint. Maybe You can help me with the prise? Thank You for the interest. With regards-- creator
EBAY or PFA here to see what you can get out of it... but thats a nice car it would be worth it to me if I could afford that... I'd jump on it if I could jump that high
IP: Logged
01:19 PM
Eclipse Member
Posts: 2040 From: Woodstock, Ontario Canada Registered: Jun 2004
Well I finally made it down to visit with the Bobby aka the Creator. I took my son with me and left around 8:15am and got there about 10:30. I had called earlier just to make sure he would be there and if it was ok we came.
I don't really know what I can say except: This man is a genius, the work he does is Fantastic. His personality is one of Sharing, Giving, and Kindness I just can't say enough good things about him. I never talked or met him before today yet it felt like I have known him for along time.
There were many questions I had for him and he helped clarify a few things that I am going to do to my car. I had brought along a CD with pics of the car and he showed me a few tricks to use on what I was going to do and also some great advice with some things I was stuck on.
I also picked up a couple of parts that he is going to be selling. These are High-Quality and you can pretty much use them anywhere you want. I am going to add mine to the Norm's front-end on my GT. I just took some pics and measurements of those pieces. You can contact Bobby to get a price on them.
I wish I had some pics but when I went to use the digital camera the batteries were dead. Well I always carry extra and out of 12 none were charged Oh well Exoticse has posted a lot on here. Only thing is that he has come along way on the car. There are so many things he has done to it I can't wait to see it when it is done. I won't share everything, as you will just have to wait and see @ Daytona.
If only I lived closer I would be there helping and learning from a master.
I would also like to say that he has all the molds for the Orange GT and if you are wanting a set get in touch with him and find out more.
IP: Logged
08:38 PM
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
That is fantastic Joe, i am so glad you finally got to meet bobby ! He is everything you described and more.
One of the friendliest, most genuine people you ever want to meet,..and his skills ??? Well when it comes to fiberglass Bobby (and his brother who helps out) are simply amazing.
Bobby sent me pics of those scoops he plans to sell as well as some other things, and i think everyone will be pleased.
The guy is really about to take off doing something he really, really loves. I am like you Joe, if he lived closer, he would probably have to kick me out of his shop everynight because i would be there absorbing every bit of knowledge i could !!
I am planning another trip down to his shop before daytona.
IP: Logged
09:08 PM
Feb 22nd, 2007
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
creator or fieroGTRwidebody; What is the "mud" material you guys put outside the foam and where can I get it? Also, what type/density foam are you guys using and how difficult is it to work.
I'm just about done stripping my chassis and will start making the plug next week hopefully. My design is not the renders you may have seen before, its alot different than alex and bobby's widebodies.
Chris
IP: Logged
01:55 AM
FieroGTRwideboby Member
Posts: 591 From: Socal (Pasadena) Registered: Jun 2004
That sounds like more than a fair price to me. I can not afford it but the price seems right for someone who can. Hell I have $17000.00 into my car and it is nowhere near as custom as this!
------------------
My best advice when it comes to your Fiero is to "NOT" do any dealings with www.kitcarman.com
VIAGRA - Strong enough for a man but made for a woman
IP: Logged
12:13 AM
Aug 6th, 2007
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
needs to be lowered with bigger rims to really set it off. . The fronts pretty cool but im not sure if i like the wing and vents on the taillights. Only my opinion though.