Looking good. Canīt wait too see that dash when ready. I am going for the firebird dash later on but in the meantime I am installing 6x9 speaker in my original dash. You said it was done on yours but they did not take any pictures of the mod. I have and will post them in a new tread next week when I am 100% done with that mod. You canīt see anything on the outside but there are a lot of work too get them in on the inside!!!
Need an update on the #15, VDC doors and the interior!!!
Not finished yet. Car is now located in new shop awaiting completion of dash. I may need a Snickers bar...hmm? Currently I'm working on next project tring to figure-out what type of blacked-out rims to use.
quote
Originally posted by exoticse:
Sometime between October and January. Got an overseas trip coming, gotta wait till i come back.
Hmmm......at this rate of speed you could piggy-back one of those VDC with you over seas?
[This message has been edited by madcurl (edited 06-15-2005).]
IP: Logged
05:58 PM
Jul 1st, 2005
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
He can look at a piece of junk and figure out a way to tweek it and use it on his car, that looks better than most aftermarket stuff you or i can buy right off the shelf.
It is sickening,..hehehehe actually depressing !
I know i certianly do not have this gift.
[This message has been edited by exoticse (edited 07-07-2005).]
IP: Logged
01:00 PM
THE BEAST Member
Posts: 1177 From: PORT SAINT LUCIE,FLORIDA,USA Registered: Dec 2000
Yes and No. He told me but at the moment it skips my mind. Madcurl can give you the proper answer when he gets a chance.
He basically found a busted up bumper with a body kit installed at either a junk yard or tossed in the trash at his bodyshop, i forget which one, and saw the opportunity to glass it back together, reshape it, and create a custom rear diffuser.
Just yet another great idea.
IP: Logged
02:20 PM
Jul 15th, 2005
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
I got the difuser from a newer Honda Civic 2003? I have another one from a Ford Escort too which has better vents. In any case, I'm going to just mold-in the part using ribbets first then, later fiberglass material. The pics were just a simple mock-up.
Update #15:
Picking up #15 next month. Driving the V8 bubble-top is nice but, I need to get started on the front-end flaring.
[This message has been edited by madcurl (edited 07-15-2005).]
IP: Logged
02:34 PM
Jul 18th, 2005
pavo_roddy Member
Posts: 4351 From: State with a city named Gotham Registered: Apr 2004
well HOP to it - we want results (ribbet joke since i think you were talking about rivets)
Sorry. I had salad that daym hehe.
The 13" Corvette brakes are from Design 1 Systems in OKC. They are from the Z06 but I wanted the 13's on all fours. I seen a Z06 last Sunday and the rear brakes looked strange to me.
IP: Logged
12:43 PM
pavo_roddy Member
Posts: 4351 From: State with a city named Gotham Registered: Apr 2004
This is good news indeed! What other mods do you have on the suspension??
edit: Design 1 needs to update their site, cuz I saw no listing for this brake conversion... I was curious as to how much it might be....
Nothing. It's all OEM. No need for drop springs, coil-overs, or special upper arms using 19/20 combos. Just put them on...and roll. I do have polys on corners but thats it.
IP: Logged
07:08 PM
Aug 6th, 2005
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
I got to get me a set of those hehehehe. Once the dash is done, the body mods finished and this car painted, it is going to be one baddddddddddddd chopper !
IP: Logged
10:38 AM
cire36 Member
Posts: 674 From: Rio Rancho, NM Registered: Feb 2002
In one of the pics, the lower VDC strut mount pushes the wheel well liner foward. Do they end up staying that way? Is it an issue once the fenders are reinstalled?
IP: Logged
01:10 PM
Aug 11th, 2005
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
In one of the pics, the lower VDC strut mount pushes the wheel well liner foward. Do they end up staying that way? Is it an issue once the fenders are reinstalled?
hmm. I will ask them about that. I noticed it too. Not a issue on #11.
Update: from Kelly [Quote]
"Jerry has it all apart AGAIN!! to fix the area for the filp screen area. I'll send more pic's when he puts the parts back in."
Kelly [quote]
Appearently the DVD screen was touching the under side of the center vents when fully extended.
IP: Logged
07:39 PM
PFF
System Bot
MilleniumFiero Member
Posts: 1225 From: Pearl Harbor, Hawaii USA Registered: Dec 2002
Being that i know Curly is missing #15 badly, i will throw him some unposted pics of #15 from Daytona 2005 to tide him over for a bit and remind him what it looks like.
IP: Logged
08:28 PM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
are you going to take the aero piece off the door?
i imagine you already have something planned but i think some of the fierowarehouse (i think they might be from the imsa widebody kit) front fenders would look great!
id keep the front fender the stock front width, make it look like it's muscular car ad giving it a total mean look, similar to a 575, instead of a WRX look of all 4 wheel wells flared.
IP: Logged
05:12 PM
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
id keep the front fender the stock front width, make it look like it's muscular car ad giving it a total mean look, similar to a 575, instead of a WRX look of all 4 wheel wells flared.
I think curly has already decided to flare the front as well. Should look good.
It will tuck those wide front wheels in quite nicely.