YELLOWFIERO88 Brian, Beautiful Job! In your “Project "DA COUPE" build thread”, you only say “Thanks. Its a mopar color blue. Sorry but thats all I will tell you”. I think I know, and if I’m right, I owned 2 of them. If you don’t mind, I’m sending you a PM to see if I’m right. I’ve been trying to figure out a good paint scheme for my IMSA and my old Mopars came to mind. Bob
------------------ Bob 84 SE IMSA Widebody 87 GT 5spd 05 Vibe
[This message has been edited by What about Bob (edited 09-29-2008).]
IP: Logged
07:50 PM
Sep 30th, 2008
ALLTRBO Member
Posts: 2023 From: College Park, MD Registered: Mar 2006
My new insperation a photo chop but thats what I do. what do you think black and silver? choptops look sweet but prob. not very practical but looks good anyway.
[This message has been edited by 85SEnochie (edited 10-10-2008).]
IP: Logged
03:40 PM
Dec 11th, 2008
pokeyfiero Member
Posts: 16203 From: Free America! Registered: Dec 2003
Here's mine. Not your traditional 2-tone look, but I wanted to be different, and I like it. It's not finished yet (obviously). I was doing some buffing in this picture, and you can see part of the wing (yet to be painted) behind it that I'm going to install.
Well, here's a 'finished' picture of it.
IP: Logged
10:40 AM
Jan 15th, 2009
ALLTRBO Member
Posts: 2023 From: College Park, MD Registered: Mar 2006
Here's my plan. I PS'd the wheels onto this car and Fieroboom and also BazookaFiero changed the bottom half to black for me (I used both of their PS's to make my final version). Other than a few minor tweaks, this'll be it.
Edit: updated pic
[This message has been edited by ALLTRBO (edited 01-16-2009).]
IP: Logged
04:36 PM
Jan 17th, 2009
ALLTRBO Member
Posts: 2023 From: College Park, MD Registered: Mar 2006
Originally posted by ALLTRBO: I thought I saw a thread with two-tone paint jobs in the past but I can't find it, if it exists.
You probably did. Here is one, a 2006 thread on that very subject. Titled, "Two-tone Fieros," it's been archived here on Pennock's Fiero Forum, but nonetheless still is readily accessible via clicking on this PFF link: https://www.fiero.nl/forum/A...070315-1-059318.html .
Enjoy!
IP: Logged
07:02 PM
Feb 14th, 2009
ALLTRBO Member
Posts: 2023 From: College Park, MD Registered: Mar 2006
I don't know if this counts since mine's more of a rat rod right now, but:
The clear coat is gone from the top half of the car. Those stripes are Dupli-Color rattle can primer.
------------------ 1988 Fiero GT "Rolling Thunder" Restoration Project Soon to have 3800 SC III + F40 "I'm a Rolling Thunder and a Pouring Rain... I'm coming on like a Hurricane - ACDC"
IP: Logged
08:39 AM
Jun 14th, 2009
ALLTRBO Member
Posts: 2023 From: College Park, MD Registered: Mar 2006
Here is what I am going for with my current build. I have been working hard at sanding the car for the past week or so and hope to begin spraying it next week, weather permitting. Please excuse the poor photoshop job, it was my first attempt since getting the software and I have lots to learn.
The silver I picked out I think will turn out lighter than the one in this photo. I hope the orange is exact because I really like it. The silver is from a Land Rover and the Orange from a Nissan 350Z. I will try to take pics when it gets back together.
-Joe
IP: Logged
12:03 AM
ManMadeChickens Member
Posts: 553 From: Clackamas, Oregon USA Registered: Jun 2006
My race car, pre-decals. It's modeled after the Goodwrench Huffaker IMSA car. White on top, red on the rubstrips, and an equal width stripe of silver below. Black on the bottom.
IP: Logged
06:07 AM
topsportsmanta1 Member
Posts: 221 From: marysville michigan Registered: Feb 2010
Like that eh..?? I love going back awhile and read afterall I was gone for about 3 years... I always try to bump these types of threads anyways just for all the new members to see.
IP: Logged
02:33 PM
Dec 17th, 2010
Jim_Martin29 Member
Posts: 702 From: Marina, California, USA Registered: Jun 2010
