Dave,

This is totally awesome that you could dedicate all efforts & time for 5 days to pull this off. We all envy your resources.
Do wish you were on the west coast .

Job is completed. Here is a quick startup video from my cell phone, so please excuse the crudeness. The only thing left is to put the decklid on and test drive, but both of us are beyond exhausted and the 12 pack at home is calling my name.
The unequal length headers make is rumble like a V8. Note the VW coolant bottle where the battery was. That is our intercooler reservoir that self purges the air and holds a decent amount of G12 coolant.



------------------

www.hausofguru.com

[This message has been edited by bmwguru (edited 02-04-2011).]

Damn Dave, that sounds tough! Good job man, I don't think anyone will ever be able to say anything against your skills.

You guys are awesome! Congrats on hitting your aggressive time line! That thing sounds mean!

RIGHTEOUS!!!!!

You guys ROCK!

quote Originally posted by Charlie64: Ace, let's just say he realized he had no alternative.

P.M. Sent - Your car rocks!

Looking at your video is that an arc at the throttle body?

Great job!

What Loyd couldn't/wouldn't do in 3 1/2 years, you did in 5 days! Fantastic job!

quote Originally posted by Jake_Dragon: Looking at your video is that an arc at the throttle body? Great job!

That is the TB linkage arm moving when rev-ed....

quote Originally posted by MstangsBware: That is the TB linkage arm moving when rev-ed....

Good.

Should have known it was something else. Again good job on the install

quote Originally posted by Will-Martin: P.M. Sent - Your car rocks!

Thanks Will. Team GURU really came thru! PM sent for your other questions.

Charles

This is awesome! Can I send the Joel project up to you now for a 3800? LOL

Nice work. You did an amazing amount of work in such a short time. Good luck on the test drive.

So now that phase 1 of this project is complete, we will be starting phase 2 after the 18th of this month. I don't plan to pull that off in a week's time, though. For phase 2, Charles wants new gauges, a dyno run, and I have a few suggestions that I plan to run by him.
I plan to keep updating this thread as we build the car....including more pics and videos in better lighting as well as our initial video of Ryan and I removing the drivetrain in 30 minutes.
Dave
ps...Ryan and I both agreed that this swap would have gone much easier if it had been a stock 2.8 for us to start out with, but thanks to careful planning and both of us being on the same page, we did indeed finish in the five day window. Our initial plan was to have it running by Wednesday and take it easy on Thursday and Friday. The wiring mods took me an additional day and for him, modifying the cradle and front engine mount so the engine wouldn't sit crooked took him an extra day.

[This message has been edited by bmwguru (edited 02-05-2011).]

Dave needs his own TV show. That before pic was horrible how could anyone pass that off as a finished swap.

Man it sure in impressive to see that car finnally back in the game! You guys really came through on it. My hat off to you! gCan't wait for some nice "clean car" pics today!!!!!

[This message has been edited by johnyrottin (edited 02-05-2011).]

That is most awesome. I hope the rest of it goes well, but I'm sure it will with you guys at the wheel.
Now if only my car could have been completed that fast. (Lots more custom one-off work, no chance. )

Charlie, I bet you're chomping at the bit!

------------------

'88 Fiero GT - Project MIDTRBO
'10 Camaro LT/RS - daily driver
'96 Talon TSi AWD - 11-second winter beater
There's no replacement for turbo placement

Jealious here!!

quote Originally posted by ALLTRBO: That is most awesome. I hope the rest of it goes well, but I'm sure it will with you guys at the wheel. Now if only my car could have been completed that fast. (Lots more custom one-off work, no chance. ) Charlie, I bet you're chomping at the bit!

I've had a grin from ear to ear since seeing the video I'm very interested to hear what else Dave has in mind

[This message has been edited by Charlie64 (edited 02-05-2011).]

quote Originally posted by bmwguru: Job is completed. Here is a quick startup video from my cell phone, so please excuse the crudeness. The only thing left is to put the decklid on and test drive, but both of us are beyond exhausted and the 12 pack at home is calling my name. The unequal length headers make is rumble like a V8. Note the VW coolant bottle where the battery was. That is our intercooler reservoir that self purges the air and holds a decent amount of G12 coolant.

Nice man, very nice.

------------------



"Friends don't let their friends drive stock."

Very impressive

Only one thing missing.................................................................................................where's the finger?

quote Originally posted by carnut122: Only one thing missing.................................................................................................where's the finger?

Yeah! Somehow i feel like we've been jipped.

That's what's missing....the "Joey" pose!

I'll have to get a finger pic posted for you guys. We took the weekend to sleep and came back to a nuthouse at the shop today. I should close my shop up for a week every few months. I have more German car work than we can handle waiting for us.
If the weather clears up, I plan to start putting some "break in" miles on Charlie's car. I have the rev limiter set kind of low for now to prevent killing the new cam. I'll bump it back up after a few hundred miles.
I will post up the details as to what phase II of this build will be. Mostly suspension and brake mods. I plan to try and get Alltrbo's alternator bracket fabricated before then.
Dave

quote Originally posted by carnut122: Only one thing missing.................................................................................................where's the finger?

For now till the real one Lol

I've been trying to post up the initial video of the drivetrain removal, but can't seem to edit it small enough. Any ideas? Or is anyone willing to work with it if I mail it to them on a flash drive?
Dave

Let me see what I can do.

quote I have the rev limiter set kind of low for now to prevent killing the new cam. I'll bump it back up after a few hundred miles.

I highly suggest against having any type of rev limiter on the car. Rev limits cut fuel, and re-enable it very quickly on a revlimiter, and even more so with a modded motor. This causes lean conditions and I know from experience what happens after that. Set the rev limiter to 7200 in every car you tune and dont ever change it.

There is nothing that you can do to a hydrolic roller cam that can harm it from the first day it is installed to 200k miles, they come hardened and "broken in" from the factory.

quote Originally posted by bmwguru: I've been trying to post up the initial video of the drivetrain removal, but can't seem to edit it small enough. Any ideas? Or is anyone willing to work with it if I mail it to them on a flash drive? Dave

I can do it. How big is the video in MegaBytes?

You can upload it to me, mail it to me on a flash drive or whatever...
I can upload the entire video to Youtube, as I no longer have a time limit to my videos.

quote Originally posted by Synthesis: I can do it. How big is the video in MegaBytes? You can upload it to me, mail it to me on a flash drive or whatever... I can upload the entire video to Youtube, as I no longer have a time limit to my videos.

I just checked my youtube and I can now upload longer videos.....I'm glad cause I thought I was going to have to host it on a p o r n site...lol

Dave

[This message has been edited by bmwguru (edited 02-08-2011).]

quote Originally posted by bmwguru: I just checked my youtube and I can now upload longer videos.....I'm glad cause I thought I was going to have to host it on a p o r n site...lol Dave

Well, if you need help, lemme know.
I believe I can do up to 2 hours now.

I hope things are settling down there in the shop!

I've had the flu for the past week...pushing 103 fever daily...and still at the shop. Hoping to be all better for when Charlie comes up on Monday to test out his ride.

Sorry to hear it man. I hope you better soon!

Beautiful work. Really something to be proud of. Take some time for yourself and kick that bug.

Works out better that way since I was sick too.

What more can you say???

More pictures after my visit with Dave this Monday!!!!

[This message has been edited by Charlie64 (edited 02-19-2011).]

I set all my rev limiters to cut the spark and not the fuel, so the engine will not go lean when it cuts in. It is also a smoother cut out than having the fuel cut first. I also am getting very skilled with the hp tuners software.....and spent the extra cash on their tuning school books...which did clear up a few things.
Dave