[Ownage is MINE! ]

Ok, Here is the latest info, I will do my best to keep this post, at the top of page 3 Updated:


Updated 01/03/12 10:37 PM
---------------------------------------------

Build Schedule
-----------

Starting Saturday morning the 7th
Continuing through Sunday afternoon the 8th.

Location
--------

706 executive Ct.
Woodstock, GA 30189


Weather for the Weekend




Hotel info
------------
Microtel Inn and Suites Woodstock/Atlanta
305 Molly Ln, Woodstock, GA 30189
Phone (678) 738-0001
Fax (678) 738-0900

Speak to Gail (The manager)...she will give you a special rate of $62.10 plus tax and it includes complementary breakfast. My total for two nights was 141.60 so it should be $70.80 per night including tax.


Parts Taken Care of Already
---------------------------

German cakes and German coffee (Donster and wife)
Seat Covers (Mr Mike)
Antifrezze (JohnWPB)
oil (JohnWPB)
filters (JohnWPB)
Steering wheel for GT (JohnR don't remember if it was a GT)
Brake calipers (JohnR 3 calipers 2 Rears 1 front used)
Clutch (Donated Local parts store)
6 cylinder dog bone (Racing_Master)
Paint - PPG (Thanks to Tiger Point Auto Body)
Napa Gulf Breeze - Refused Participation
Advanced Auto Navarre - $100 dollars in parts
Advanced Auto Gulf Breeze - Plugs and wires
Affordable Automotive - Engine work labor
ORiellys Navarre - $100 dollars in parts (alternator, master and slave clutch cyl, labor)
98 Garage - Brake work labor
Battery bolt down block and bolt - (Mattman134)
Battery - (Johnyrottin)
Vent Covers - (Silver 85 SC)
Center Console Cup holders - (TXGOOD)
Fuel Pump - (Johnyrottin)
Seat Recline Mech Covers (84 Grey) Both Sides - (Indyellowgt)
Seat Recline Mech Handles Both Sides- (Indyellowgt)
License plate light holders- (Indyellowgt)
Tailights - (Paul Vargas)
Inner Dew Wipes - (ALJR)
Clutch master Cyl - (Hulki)
Clutch Slave Cyl - (Josef644)
Dash end caps - (Fieroguy123)
Misc supply of torx screws for Interior bits. - (Katatak)
Headlight switch brand new Rock Auto! - (Hulki)
Dimming Rear View Mirror with compass (Hulki)
Sunroof Deflector - (njcwgrl)
Spare Tire Cover - (Fiero Thomas)
Rims - Jamie (Gulf Coast Fieros)
Trunk Cover - (Russ88TTop)
Carbon Look Mirror Covers - (Russ88TTop)
Dew Wipes - (DIY_Stu)
1984 Headlight Motor Rebuild Kit - (Rodney Dickman)
Painter - (Mike at Hurlburt Airbase)
4 Marker Lights - (Indyellowgt and TLG)
Trunk seal (Raydar)
Thermostat Housing (Raydar)
SS lines (Whodenie?)
Center Console - dark gray (fierofool)
Cruise control cable 6 cylinder (fierofool)
6 cylinder Dog Bone* (Racing_Master)
6 cylinder Fiero Store Poly Dog Bone* (CowsPatoot)
Brake calipers (JohnR 3 calipers 2 Rears 1 front used)
6 cylinder housing and cap (CowsPatoot)
Interior carpet (CowsPatoot)
Trunk carpet (CowsPatoot)
6 cylinder A/C lines ( Hard lines) (CowsPatoot)
Poly bushings...front, rear, and sway bar (CowsPatoot)
Radio (With CD) (Carnut, CowsPatoot & redraif combined effort )

*= Duplicate, will use whichever is better


Parts Pending
-------------
New peddles (I have a set for an automatic ill bring them but manual set will still be needed)
Trunk carpet (JohnR will clean or does it need replaced?)


Parts Still Needed
------------------
Cradle mounts
Motor and trans mounts
Rotors ( front and rear)
E-brake has issues be not sure what yet
New windshield wipers
Motor mounts
Radiator hoses
6 cylinder wiring harness
Cradle mounts
Freon
Oil pressure sender
Shift surround ( dark gray)
New dash
6 cylinder throttle cable
Sun roof seal and tracking
Tires
6 cylinder fuel pump
6 cylinder A/C lines ( Hard lines)


- If anyone has parts between Orlando and Atlanta, 2002z28ssconv has offered to pick them up and take then to the shop.
- If anyone needs parts moved to the shop from the Atlanta area, let Raydar know.

If you can provide any of the above, that are not covered yet, take the part from the list, copy it into a post, and add your name at the end to let others know this is covered.

The parts needed list is getting smaller and smaller!


Atendees
----------

1) johnyrottin
2) whodeanie
3) Racing_Master
4) Tweeter
5) Raydar
6) fierofool
7) Donster
8) 2002z28ssconv
9) Suufmeister
10) CowsPatoot
11) redraif
12) old one
13) JohnWPB
14) carnut122
15) Fierfly
16) Aerodonamic
17) 85GT
18) Duchess
19) RockinRoger
29) 308GTB
21) TopNotch
22) hnthomps


If you are not on the list, just copy and paste it into a post, and add your name.
.
.
.
.
.
.

quote Originally posted by fierofool: I've also just been made aware that the rail terminal has been moved to the South terminal, but it's still easy access from baggage. Just take the Red Line North Springs train for a hassle-free ride.

No worries... I have been through Atlanta so many times, I think I could draw an accurate blueprint of the entire airport! I was just stranded there coming back from the 2nd Annual Tyler Shipman Memorial Car show the beginning of August, due to weather.

I'm gonna bring my GPS with me, as I don't want to accidentally turn right on Peach Tree St, to end up merging into Peach Tree St at the far end, and miss my turn onto Peach Tree St. The fine folks from Atlanta will understand this LOL

[This message has been edited by JohnWPB (edited 01-03-2012).]

[This message has been edited by Tweeter (edited 01-02-2012).]

quote [B]Originally posted by JohnWPB:[/ I'm gonna bring my GPS with me, as I don't want to accidentally turn right on Peach Tree St, to end up merging into Peach Tree St at the far end, and miss my turn onto Peach Tree St. The fine fold from Atlanta will understand this LOL

Wahaahhaha

we are still on board here. I say we raffle it off and use the money for a good cause
what ever happens I want to finish the car.
D.

The last time I looked there were more than 17 streets in the Atlanta area with "Peachtree" in the name.

Nelson

quote Originally posted by redraif: quote [B]Originally posted by JohnWPB:[/ I'm gonna bring my GPS with me, as I don't want to accidentally turn right on Peach Tree St, to end up merging into Peach Tree St at the far end, and miss my turn onto Peach Tree St. The fine fold from Atlanta will understand this LOL Wahaahhaha

[This message has been edited by hnthomps (edited 12-30-2011).]

quote Originally posted by JohnWPB: [Ownage is MINE! ]

yea you got page 3. I went in to data roam as i was trying to reserve that spot up top for a recap of page 1 and 2.

Just waking up from my travel nap. I am leaving now, nice and early. I'll see you all down there later in the week. Have a safe and happy new years everyone, ill see you in 2012.

Edit: forgot to mention I am driving. Wish my fiero luck!

[This message has been edited by Racing_Master (edited 12-30-2011).]

quote Originally posted by Tweeter: yea you got page 3. I went in to data roam as i was trying to reserve that spot up top for a recap of page 1 and 2.

Sorry about that! PM me the info you want in the post at the top of this page, and I will edit my post to include it.

Hey, don't distract Dean and his crew too much or work on my Fiero will never start...!

quote Originally posted by yellowstone: Hey, don't distract Dean and his crew too much or work on my Fiero will never start...!

LOL! work on yours has already started, I just have not posted about it yet because we have been slammed trying to get a car done to go to Germany

yours will not take long once I get the lift free. I need a second lift anyone want to donate one

We are going to have to figure out how to say 3800 intercooled supercharged in German! "3800 Intercooler Kompressor"

quote Originally posted by johnyrottin: We are going to have to figure out how to say 3800 intercooled supercharged in German! "3800 Intercooler Kompressor"

Maybe Yellowstone can help us out with that. I wanted to show my wife your extractor vent on yellowstones Fiero but didn't have anytime. BTW John was a huge help at the moving sale today.

Drei komma acht Liter Vau Sechs mit Kompressor und Ladeluftkuehler.

There.

quote Originally posted by johnyrottin: We are going to have to figure out how to say 3800 intercooled supercharged in German! "3800 Intercooler Kompressor"

quote Originally posted by johnyrottin: We are going to have to figure out how to say 3800 intercooled supercharged in German! "3800 Intercooler Kompressor"

That would be: "Dri Tousand, Aucht Hundred Intercooler Kompressor"


EDIT: Yikes, missed the above post, well thats how you say 3,800 at least hehe

Looking again, Wouldnt Aucht Litre be "8 liter"? That WOULD be nice! LOL Hahahah!

For Racing Master, it may help if ya know what I look like when you are trying to pick me up at the MARTA station...



Let's get some photo's of the people attending!

[This message has been edited by JohnWPB (edited 01-01-2012).]

quote Originally posted by yellowstone: Drei komma acht Liter Vau Sechs mit Kompressor und Ladeluftkuehler. There.

This translates to "Three point eight liter Vee Six with Supercharger and Intercooler".

For a regular room at the Microtel, I got a rate of $55/night. I don't know if its a travelocity deal, or that I am staying 7 nights, or if I got a crappier room than others might get :P. I just got a regular 2 bed room. No clue if it includes breakfast <_<; i'll have to guess it does XD if not I gotta be sneaky and take all the bagels.

EDIT: I will always be parking on the side of the building near the pool, easy on/off access to the staircase. We should park all the fieros there, its empty and we can all be next to eachother. im on the second floor. If they ask you for room preference, maybe someone can get the room next to me and we can open the joined room doors, that is if no one else is in there when you get here.

edit #2: Johnyrottin is listed twice in the attendees.

[This message has been edited by Racing_Master (edited 01-01-2012).]

quote Originally posted by Racing_Master: Johnyrottin is listed twice in the attendees.

Thats cause hes that awesome.

quote Originally posted by Tweeter: Thats cause hes that awesome.

lol. Some people might find being considered two people offensive! like, if you get given two chairs to sit in, or have to ride in the bed of a pickup... or get charged for two people at the amusement park.

Anyway, here is a picture of my ugly mug, just took it.

antifrezze (JohnWPB)
oil (JohnWPB)
filters (JohnWPB)
cradle mounts
motor and trans mounts
calipers of rebuild kits
roters would be good
we have SS lines already
the ebrake has issues be not sure what yet.
Console (dark gray)
New winshield wipers
Seat covers (Mr Mikes Leather)
Steering wheel for GT (JohnR dont rember if it was a GT)
New peddels (I have a set for an automatic ill bring them but manual set will still be needed)
Motor mounts
Radiator hoses
6 cylinder wiring harness
Trunk carpet (JohnR will clean or does it need replaced?)
Trunk seal
Craddle mounts
Brake calipers (JohnR 3 calipers 2 Rears 1 front used)
Rotors ( front and rear)
Clutch (Donated Local parts store)
Freon
6 cylinder dog bone
6 cylinder housing and cap
Oil pressure sender
Interior carpet
Shift surround ( dark gray)
New dash
Radio (CD)
Rear view mirror
6 cylinder throttle cable
Cruise control cable 6 cylinder
Sun roof seal and tracking
Tires
6 cylinder fuel pump
6 cylinder A/C lines ( Hard lines)

quote Originally posted by Tweeter: antifrezze (JohnWPB) oil (JohnWPB) filters (JohnWPB) cradle mounts motor and trans mounts calipers of rebuild kits roters would be good we have SS lines already the ebrake has issues be not sure what yet. Console (dark gray) New winshield wipers Seat covers (Mr Mikes Leather) Steering wheel for GT (JohnR dont rember if it was a GT) New peddels (I have a set for an automatic ill bring them but manual set will still be needed) Motor mounts Radiator hoses 6 cylinder wiring harness Trunk carpet (JohnR will clean or does it need replaced?) Trunk seal Craddle mounts Brake calipers (JohnR 3 calipers 2 Rears 1 front used) Rotors ( front and rear) Clutch (Donated Local parts store) Freon 6 cylinder dog bone 6 cylinder housing and cap Oil pressure sender Interior carpet Shift surround ( dark gray) New dash Radio (CD) Rear view mirror 6 cylinder throttle cable Cruise control cable 6 cylinder Sun roof seal and tracking Tires 6 cylinder fuel pump 6 cylinder A/C lines ( Hard lines)

I brought down a 6 cylinder dogbone!


EDIT: Lets just get in the real time chat and talk there instead of posting seconds after eachother :P

[This message has been edited by Racing_Master (edited 01-01-2012).]

Ok, I updated the attendees, and the parts list. I also copied the info to the first post here on page 3. I will do my best to keep this post updated, as info changes.


EDIT: Just pulled up the weather forecast, and put it in the first post on this page..... I hope the shop is heated! !

[This message has been edited by JohnWPB (edited 01-01-2012).]

quote Originally posted by JohnWPB: I hope the shop is heated! !

I'm sorry! I took NH's weather down with me! Still feels like summer to me here. Tuesday's high in NH is 19 degrees, low is 2 :P. This here feels AMAZING compared to up there. Hell up in NH I was wearing short sleeve shirts in 40 degree weather going "Wow this feels pretty good out here"

i've got a complete cruise servo, cable and solenoid. Might have a dark gray console with glove box, too. Slight buckling on the door ok? I'll do the headlight motor rebuilding. I have a left door panel, dark gray, for power mirrors and windows, but the pocket is missing. Need it?

Edit to add a cruise vacuum canister. LMK what's needed.

[This message has been edited by fierofool (edited 01-01-2012).]

quote Originally posted by fierofool: i've got a complete cruise servo, cable and solenoid. Might have a dark gray console with glove box, too. Slight buckling on the door ok? I'll do the headlight motor rebuilding. I have a left door panel, dark gray, for power mirrors and windows, but the pocket is missing. Need it?

I say if it's not too much trouble, just bring it all along, if it's needed we will have it there, if not, it can go back home with you.

As for the warping around the glove box door, I can fix that fairly quickly with some clamps, paint stirrers, and Gorilla Glue. It will look like new again.

I've got a V6 thermostat housing and cap. (The coolant line fittings for the TB heat have been removed.)

I've also got a trunk seal. (I'm assuming you mean the rear compartment seal for a notchie.) It's not perfect, but if nobody can come up with a better one, it'll work just fine and won't look bad.

If you all have anything and it is possible please bring it. It would be better to have it and not need it than to need it and not have it. It is always amazing how everyone comes together in this community!!!

Aprox 92 hours till road trip.

First post at the top of page 3 updated with parts. Sorry about the broken weather image, it is hosted on PFF. It seems the image hosting on PFF is currently broken, as all of the images in my build thread are hosted on PFF, and are gone as well

[This message has been edited by JohnWPB (edited 01-02-2012).]

quote Originally posted by Tweeter:

I'm thinking I have an aftermarket radio/CD, but I'm not sure about having the correct trim surround to make it work.

quote Originally posted by yellowstone: Drei komma acht Liter Vau Sechs mit Kompressor und Ladeluftkuehler. This translates to "Three point eight liter Vee Six with Supercharger and Intercooler".

Ausgezeichnet! Ich haette es nicht besser uebersetzen koennen!

Darn, way too many Umlaute in that one :-)

See you all next weekend.
My wife and I will be providing German cakes and German coffee

\D

[This message has been edited by Donster (edited 01-02-2012).]

Pretty good dash if you can get it there.

Parts Still Needed
------------------
6 cylinder housing and cap (CowsPatoot)
Interior carpet (CowsPatoot)
Trunk carpet (CowsPatoot)
6 cylinder A/C lines ( Hard lines) (CowsPatoot...providing the lines from a Formula will work)
Poly bushings...front, rear, and sway bar (CowsPatoot)...does not include cradle bushings
Fiero Store Poly dog bone (CowsPatoot)...lightly used, we can see which is nicer between Racing_Master's and this one

Atendees
----------
1) johnyrottin
2) whodeanie
3) Racing_Master
4) Tweeter
5) Raydar
6) fierofool
7) Donster
8) 2002z28ssconv
9) Suufmeister
10) CowsPatoot
11) redraif
12) old one
13) JohnWPB
14) carnut122
15) Fierfly
16)
17)
18)
19)

quote Originally posted by redraif: I have a new solid motor mount that would not work for me due to the bolt holes not lining up... part cost less then the shipping so no sense returning... maybe it will work for this car? Have to get the part number for dean to check Part number... AutoExtra 2472/Anchor 2472

Motor mount? Will this work for the V-6? I got it for my duke as a spare, but the holes did not line up on my cradle. Will it work for this application? I thought I remembered reading there was some parts cross over on the solid motor mounts? Yes/No???

quote Originally posted by CowsPatoot: I think I have a spare install kit...but I won't know for sure until I get home on Wednesday.

Let me know if you don't have it... I might have one in my junkyard stash... I did not think to look at the stereo stuff... I will try to remember to look tomorrow if time allows!

------------------
Rescued & resuscitated 1984 Indy Fiero SE Pace Car Replica #770 presently reversibly modified!
SE: Stormtrooper Edition


Everything is the Previous owners fault

Ok, first post on the top of this page updated again with all the info from the previous few posts. Looks like they fixed the PFF image hosting

Donster and wife get booted to the top of the list of parts provided

[This message has been edited by JohnWPB (edited 01-03-2012).]

I have a nice rear view mirror and a poly dog bone (if it fits) that I can deliver if still needed.

Nelson

[This message has been edited by hnthomps (edited 01-03-2012).]

quote Originally posted by carnut122: I'm thinking I have an aftermarket radio/CD, but I'm not sure about having the correct trim surround to make it work.

is it a din headunit?

quote Originally posted by redraif: is it a din head unit?

You mean to ask if it is a single or a double din?

[This message has been edited by JohnWPB (edited 01-03-2012).]