Does anyone know what time we are gonna actually get started on Saturday morning?

EDIT: Page Ownage is MINE! ... Again ]

May as well post all the info at the top of this page as well....


Updated 01/03/12 10:36 PM
---------------------------------------------

Build Schedule
-----------

Starting Saturday morning the 7th
Continuing through Sunday afternoon the 8th.

Location
--------

706 executive Ct.
Woodstock, GA 30189


Weather for the Weekend




Hotel info
------------
Microtel Inn and Suites Woodstock/Atlanta
305 Molly Ln, Woodstock, GA 30189
Phone (678) 738-0001
Fax (678) 738-0900

Speak to Gail (The manager)...she will give you a special rate of $62.10 plus tax and it includes complementary breakfast. My total for two nights was 141.60 so it should be $70.80 per night including tax.


Parts Taken Care of Already
---------------------------

German cakes and German coffee (Donster and wife)
Seat Covers (Mr Mike)
Antifrezze (JohnWPB)
oil (JohnWPB)
filters (JohnWPB)
Steering wheel for GT (JohnR don't remember if it was a GT)
Brake calipers (JohnR 3 calipers 2 Rears 1 front used)
Clutch (Donated Local parts store)
6 cylinder dog bone (Racing_Master)
Paint - PPG (Thanks to Tiger Point Auto Body)
Napa Gulf Breeze - Refused Participation
Advanced Auto Navarre - $100 dollars in parts
Advanced Auto Gulf Breeze - Plugs and wires
Affordable Automotive - Engine work labor
ORiellys Navarre - $100 dollars in parts (alternator, master and slave clutch cyl, labor)
98 Garage - Brake work labor
Battery bolt down block and bolt - (Mattman134)
Battery - (Johnyrottin)
Vent Covers - (Silver 85 SC)
Center Console Cup holders - (TXGOOD)
Fuel Pump - (Johnyrottin)
Seat Recline Mech Covers (84 Grey) Both Sides - (Indyellowgt)
Seat Recline Mech Handles Both Sides- (Indyellowgt)
License plate light holders- (Indyellowgt)
Tailights - (Paul Vargas)
Inner Dew Wipes - (ALJR)
Clutch master Cyl - (Hulki)
Clutch Slave Cyl - (Josef644)
Dash end caps - (Fieroguy123)
Misc supply of torx screws for Interior bits. - (Katatak)
Headlight switch brand new Rock Auto! - (Hulki)
Dimming Rear View Mirror with compass (Hulki)
Sunroof Deflector - (njcwgrl)
Spare Tire Cover - (Fiero Thomas)
Rims - Jamie (Gulf Coast Fieros)
Trunk Cover - (Russ88TTop)
Carbon Look Mirror Covers - (Russ88TTop)
Dew Wipes - (DIY_Stu)
1984 Headlight Motor Rebuild Kit - (Rodney Dickman)
Painter - (Mike at Hurlburt Airbase)
4 Marker Lights - (Indyellowgt and TLG)
Trunk seal (Raydar)
Thermostat Housing (Raydar)
SS lines (Whodenie?)
Center Console - dark gray (fierofool)
Cruise control cable 6 cylinder (fierofool)
6 cylinder Dog Bone* (Racing_Master)
6 cylinder Fiero Store Poly Dog Bone* (CowsPatoot)
Brake calipers (JohnR 3 calipers 2 Rears 1 front used)
6 cylinder housing and cap (CowsPatoot)
Interior carpet (CowsPatoot)
Trunk carpet (CowsPatoot)
6 cylinder A/C lines ( Hard lines) (CowsPatoot)
Poly bushings...front, rear, and sway bar (CowsPatoot)
Radio (With CD) (Carnut, CowsPatoot & redraif combined effort )

*= Duplicate, will use whichever is better


Parts Pending
-------------
New peddles (I have a set for an automatic ill bring them but manual set will still be needed)
Trunk carpet (JohnR will clean or does it need replaced?)


Parts Still Needed
------------------
Cradle mounts
Motor and trans mounts
Rotors ( front and rear)
E-brake has issues be not sure what yet
New windshield wipers
Motor mounts
Radiator hoses
6 cylinder wiring harness
Cradle mounts
Freon
Oil pressure sender
Shift surround ( dark gray)
New dash
6 cylinder throttle cable
Sun roof seal and tracking
Tires
6 cylinder fuel pump
6 cylinder A/C lines ( Hard lines)


- If anyone has parts between Orlando and Atlanta, 2002z28ssconv has offered to pick them up and take then to the shop.
- If anyone needs parts moved to the shop from the Atlanta area, let Raydar know.

If you can provide any of the above, that are not covered yet, take the part from the list, copy it into a post, and add your name at the end to let others know this is covered.

The parts needed list is getting smaller and smaller!


Atendees
----------

1) johnyrottin
2) whodeanie
3) Racing_Master
4) Tweeter
5) Raydar
6) fierofool
7) Donster
8) 2002z28ssconv
9) Suufmeister
10) CowsPatoot
11) redraif
12) old one
13) JohnWPB
14) carnut122
15) Fierfly
16) Aerodonamic
17) 85GT
18) Duchess
19) RockinRoger
29) 308GTB
21) TopNotch
22) hnthomps


If you are not on the list, just copy and paste it into a post, and add your name.
.
.
.

[This message has been edited by JohnWPB (edited 01-03-2012).]

quote Originally posted by redraif: is it a din headunit?

I'm pretty sure its a single. I also have a Pontiac OEM unit that's Am/FM/cassette (not cd). I'll bring it too.

The center console I have is dark gray. Is the car changing color inside or staying light gray?

Attendees
----------
1) johnyrottin
2) whodeanie
3) Racing_Master
4) Tweeter
5) Raydar
6) fierofool
7) Donster
8) 2002z28ssconv
9) Suufmeister
10) CowsPatoot
11) redraif
12) old one
13) JohnWPB
14) carnut122
15) Fierfly
16) Aerodonamic
17) 85GT
18) Duchess
19) RockinRoger
29) 308GTB
21) TopNotch

Staying light grey.

quote Originally posted by johnyrottin: Staying light grey.

But John once you go Dark you wont go back!
BTW what time are we headed out on Friday? O and your Indy ran nice when it was cold out this morning

Attendees
----------
1) johnyrottin
2) whodeanie
3) Racing_Master
4) Tweeter
5) Raydar
6) fierofool
7) Donster
8) 2002z28ssconv
9) Suufmeister
10) CowsPatoot
11) redraif
12) old one
13) JohnWPB
14) carnut122
15) Fierfly
16) Aerodonamic
17) 85GT
18) Duchess
19) RockinRoger
29) 308GTB
21) TopNotch
220 hnthomps

Nelson

When are the things starting on Saturday/Sunday?

Edit: Got a bit over an hour drive to get there...

And how late are we going to keep working? The spouse is asking how long I will be gone...

[This message has been edited by redraif (edited 01-04-2012).]

I plan on being there at the crack o'dawn or earlier. We will need to call dean.

I believe that Dean normally opens the shop around 9:00 am. However, he is the only one who can answer this question accurately.

Nelson

quote Originally posted by johnyrottin: I plan on being there at the crack o'dawn or earlier. We will need to call dean.

I see the 6-cyl wiring harness is still on the parts needed list.... is this true? It is a pretty MAJOR obstacle if this is the case....

Someone please take plenty of pics to share with the rest of us

Got that covered... taking my Digital SLR, and a HD video camera

Keys! Does some one have keys? Everyone, check your pockets.

quote Originally posted by carnut122: I'm pretty sure its a single. I also have a Pontiac OEM unit that's Am/FM/cassette (not cd). I'll bring it too.

Apparently, no longer have the OEM unit. But, I do have the CD unit. I'm not sure what I pulled it out of (I think my SE), but the wiring is there and should be plug-n-play (assuming it came out of the SE). I also have 24" speakers and all kinds of misc. trim pieces (hopefully one will be correct).

quote Originally posted by Vernon8360: Keys! Does some one have keys? Everyone, check your pockets.

We should be safe, as Danyel is not going to be there

quote Originally posted by carnut122: Apparently, no longer have the OEM unit. But, I do have the CD unit. I'm not sure what I pulled it out of (I think my SE), but the wiring is there and should be plug-n-play (assuming it came out of the SE). I also have 24" speakers and all kinds of misc. trim pieces (hopefully one will be correct).

24" Speakers?!!?! Woah! Now thats gonna ROCK! ! ! ! !

[This message has been edited by JohnWPB (edited 01-04-2012).]

Glad the keys are safe. Good luck on the build. Good cause, good people and you guys are all in the proper part of the country to enjoy winter. Have fun and keep the rest of us posted.....lots of pictures required.

quote Originally posted by seafoodlover: Someone please take plenty of pics to share with the rest of us

Anyone ever see my wiring thread or my diy coil-over thread.... i have market cornered on picture taking. Prepare to be annoyed w me... lol

quote Originally posted by seafoodlover: Someone please take plenty of pics to share with the rest of us

I brought my video camera... not my tripod. So someone can film! 1080p Hi-Def fun!

You guys are just bragging. Check out weather for Pittsburgh: Our highs don't even reach your lows!

[This message has been edited by Vernon8360 (edited 01-04-2012).]

I will bring one O&M unit plus one other for spare parts. They will be available to anyone who needs them if they do not get used in the car project.

Nelson

quote Originally posted by carnut122: Apparently, no longer have the OEM unit. But, I do have the CD unit. I'm not sure what I pulled it out of (I think my SE), but the wiring is there and should be plug-n-play (assuming it came out of the SE). I also have 24" speakers and all kinds of misc. trim pieces (hopefully one will be correct).

quote Originally posted by carnut122: I also have 24" speakers and all kinds of misc. trim pieces (hopefully one will be correct).

If that was meant to be Two 4 inch speakers, the 85 doesn't have clearance for B pillar speakers, and if the interior is staying light gray as stated, there are no speaker grills on the B pillar. It was set up for speakers in the seats, only.

On the after market radio.... I have a conversion harness to make it polygon onto factory wires. Even have some factory wires with connectors that canberra soldered in if the originals are boogered up.

Have some plastic bezel surrounds but I have to verify the fit to see if they are gm or not. At least I found them... ugh...

quote Originally posted by Racing_Master: I brought my video camera... not my tripod. So someone can film! 1080p Hi-Def fun!

I have a tripod I can bring...

------------------
Rescued & resuscitated 1984 Indy Fiero SE Pace Car Replica #770 presently reversibly modified!
SE: Stormtrooper Edition


Everything is the Previous owners fault

[This message has been edited by redraif (edited 01-04-2012).]

quote Originally posted by redraif: I have a tripod I can bring...

Ill wax and bring my catch me shorts and go commando for all those ladies

I think I just threw up in my mouth a little...that image.....ugh!

quote Originally posted by Tweeter: Ill wax and bring my catch me shorts and go commando for all those ladies

I think I will have to stay home sick lol

it should be a fantastic time at the shop we are as ready as we will ever be for this, I hope
lots of locals will be stoping by to help out as well.
D.

quote Originally posted by whodeanie: I think I will have to stay home sick lol it should be a fantastic time at the shop we are as ready as we will ever be for this, I hope lots of locals will be stoping by to help out as well. D.

Hey Dean... any idea when things will get started Sat morning? and how late the work will continue into the evening?

------------------
Rescued & resuscitated 1984 Indy Fiero SE Pace Car Replica #770 presently reversibly modified!
SE: Stormtrooper Edition


Everything is the Previous owners fault

I spoke with Dean he should have the shop open 0900 and he usely stays till 1900

We will have to convince him to give us a key....0900 for military folks is like 4 hours after we normally start!

What ... Dont you mean we work 24-7?

edit: Key - well then lets get there before he closes Friday and get a key.

[This message has been edited by Tweeter (edited 01-05-2012).]

quote Originally posted by JohnWPB: 24" Speakers?!!?! Woah! Now thats gonna ROCK! ! ! ! !

Oops! Two 4" speakers.

Good morning everyone! Well for me anyways....... just woke up. I had to force myself to try to get a few hours sleep after work today. It was that or have to stay up from this morning till tomorrow night. I have to be up at 3am to get ready to go to the airport. Flight is 5:30, thus be at the airport at 4:30, half hour away, so that's leave the house at 4am.

Gonna wind up being there a day early, as the price was far cheaper to fly on a Friday than a Saturday. WIll give me a chance to hopefully stop by the shop and check things out before Saturday.

My phone number, for anyone that would want or need it is fife six one, too three six, 7 oh 2 fore.

quote Originally posted by JohnWPB: My phone number, for anyone that would want or need it is fife six one, too three six, 7 oh 2 fore.

LOL sent you a spam txt.. See you tomoorow evening or Saturday morning.

Jason

on the weekend I normaly do not come in till 10:30 becaues it is normaly the only rest I get but for the build things will start at 9 am.
this will give everyone time to get up, coffee, food and wake up. mostly me!
but I have no problem staying late and I will most likely be a little early so I can get the shop open and running.
D.

We are having a bit of a debate at the house... If I come alone I can be there first thing in the AM when you guys get rolling. But the spouse has an eye appointment at 9 and has to get dilated & she does not have a ride home... She normally can't see to drive after. So if I take her & bring her home then she can come and help out too...

She is convinced herself however, that she will be just be in the way and does not have the technical ability to help. I say there has to be something she can help with (she has more ability then she lets on)...

So I will be missing for a few hours in the AM, but I will bring a second set of hands...Whatcha think?

........help serve coffee

:-)

\D

Bring her on!

Nelson

quote Originally posted by redraif: We are having a bit of a debate at the house... If I come alone I can be there first thing in the AM when you guys get rolling. But the spouse has an eye appointment at 9 and has to get dilated & she does not have a ride home... She normally can't see to drive after. So if I take her & bring her home then she can come and help out too... She is convinced herself however, that she will be just be in the way and does not have the technical ability to help. I say there has to be something she can help with (she has more ability then she lets on)... So I will be missing for a few hours in the AM, but I will bring a second set of hands...Whatcha think?