| quote | Originally posted by Fierotregg:
Hey What is the offset on the 19x9's and 19x11.5's going to be to get them fit? |
|
Here's what the guys at Forgeline came up with based on my specs. I made my calculations from what I was running pre-widebody. I had 17x8s all the way around with the standard Fiero 35mm offset. This gave me 5.9" of backspace. The new front wheels have an offset of 22.83 and maintain the 5.9" of backspace clearance.
The rears came out to an offset of 6.35 giving me a backspace of 6.5". This was accomplished because Dave removed the stock rear strut perch which was no longer being used after he installed the coilovers last year resulting in a gain of a little more than an inch of clearance.
------------------
There's no such thing as too much power!