i can't wait to see where you are going with this one.
Is that hood from another vehicle ?
Don't know if u were aware but there is a guy selling fiberglass fiero noses, that would make modifying and or widening your nose 10 times easier than a stock one.
IP: Logged
05:37 PM
kawana Member
Posts: 2329 From: Abbotsford, BC, Canada Registered: May 2007
keeping the stock fiero nose.. i like it! Keeps the fiero feel, not trying to be something its not (ie// replicar, not bashing those that have one.). You have my attention!
IP: Logged
05:42 PM
serfius Member
Posts: 45 From: edmonton ab canada Registered: Jan 2008
yes it is a stock pontiac solstice hood i got for a case of beer and has lead me to where im at now trying to out do the ever beautiful arch rival i will have new pics this weekend when i go to work to work on it.i know that theres norms hood out there but it just didn't have the look i wanted
[This message has been edited by serfius (edited 10-30-2008).]
IP: Logged
07:19 PM
kawana Member
Posts: 2329 From: Abbotsford, BC, Canada Registered: May 2007
i know that theres norms hood out there but it just didn't have the look i wanted
what he ment is that there is someone making fiberglass copies of the Aeronose, which makes them easier to work on than the plastic (or w/e you call it) stock aeronose. Ill find the link.
Not sure what the gameplan is, but might you section out a piece from the center of the hood to make it more compatable with the fiero width, then pull a mold for a lightwieght front ?
I know you are doing a widebody, but it still looks a bit too wide ?
It could be just the angles of the pic playing tricks on my eyes.
At any rate this has the potential to look pretty darn awesome ! Great job.
[This message has been edited by exoticse (edited 10-31-2008).]
no im not going to use the solstice rear clip, im going to use ferrarri 430 inspired rear bumper using as much fiero dna as possible, then add surrounds to it like the saleen mustang to tye it into there widebody
IP: Logged
11:17 PM
Nov 2nd, 2008
serfius Member
Posts: 45 From: edmonton ab canada Registered: Jan 2008
i think it is the picture playing tricks with you eyes.the solstice hood has the front suspention so close to the front bumper that it looks really wide but by the time i cut the hood and slide the opening back to where the fiero one was, it is only 1 1/2 wider.but now that i got that one side done in the rough stage i will go back and remeasure it, to get the final measurement the first on was a rough guess. i actually do not cut the hood and remove material from the center, in fact i actually added a little pie piece into it to get the back of the hood wider and get a nice curve to the whole body.
[This message has been edited by serfius (edited 11-06-2008).]
IP: Logged
09:40 PM
Nov 7th, 2008
whodeanie Member
Posts: 3819 From: woodstock,Ga.,USA Registered: Jan 2008
I like the look of the front. and I know you are still working on it but the sides and the rear need to be a bit rounder to match the front. I cant wait to see more. keep us posted.
IP: Logged
10:01 AM
serfius Member
Posts: 45 From: edmonton ab canada Registered: Jan 2008
okay i just measured it today i i was way off on the measurement it is 2 3/4 in the front and 4 1/2 in the rear.
hey curley how wide is yours in the rear and how wide of tires do you got in the back?
the front is actually rather aggressive, and i tryed to carry the same aggresive theme to the back.but it really doesn't start til you get to the wheel opening on the front trying to work out that issue and make it more aggresive.
hey sorry for no new updates just working one the otherside laying glass and doing a lot of not seen work. for all those who have questioned the design yes it not mine but im putting my own twist and interpertation on it.i will keep you updated as i make greater progress.
IP: Logged
11:22 PM
Nov 16th, 2008
serfius Member
Posts: 45 From: edmonton ab canada Registered: Jan 2008
This is one crazy build! I love it!!!! Hey serfius, I'm down in Calgary. Do you ever hook up with the Fiero club up there? I'd love to see this thing in person. Keep up the great work!
hey no i don't actually go to the meets i know i should but i just don't got the time to right now to busy with the build of this car and others. i plan to when i finish this one to go maybe we can meet up in the summer for the edmonton calgary fiero meet.as for the rims there just mock-up that im using need something more flashy, there lambo knock off that will go on the plastagini when it ever gets done.
IP: Logged
09:26 PM
serfius Member
Posts: 45 From: edmonton ab canada Registered: Jan 2008