quote Originally posted by TXGOOD: Because of the way I frame these I can`t put a connector in the place where the above picture is, but I think the item in the link below could be installed with little problems. I am going to look for one at the local marine supply house and see if they stock one. Mike http://www.amazon.com/dp/B0...ativeASIN=B0019M5ETU

That might fit better if you install it onto tha passenger side of the arm rest. I don't like mine where it is, as I always hit it when shifting. If you installed it into the side it might fit and work better. Just a thought .....

------------------
A coward dies a thousand deaths..................A soldier dies but once.

Yea, I considered the shifting aspect, because it would be even closer to the shifter than without the cupholder there.
I will have to give it some more thought.
Thanks, Mike

wow those look cool! I like the grey shallow with the fiero emblem on it. How much would one cost?

gadjet you have a pm

quote Originally posted by TXGOOD: gadjet you have a pm

PM replied to. Ty.

Want to order a cupholder/armrest . do not know how to pm. email me at rchofey@fox56.com and I will send you the info. Thanks

quote Originally posted by rchofey: Want to order a cupholder/armrest . do not know how to pm. email me at rchofey@fox56.com and I will send you the info. Thanks

Just click on the PM button at the top right of the post from the person that you want to contact.

TXGOOD you have a PM.

rchofey you have a PM
Mike

What if you made the straps longer and velcro'd them to the carpet?

Did you ever make a setup with the two cup holders on the passanger side?

Bill

I haven`t finished it.
I have the plug just about done, but I have had a couple of other things I have been working on that have been sort of slow going.
I was just looking at the plug this weekend, thinking I need to get back on it soon.
Mike

Are you still making them??

------------------
04 Monte Carlo- unfortunately LS 3.4
95 Bonneville SSEi- Series 1-3.8 Supercharged
85 Fiero GT 4 speed muncie 2.8 Restoring Now
83 Chevy Silverado K-10 - 305- Plow Truck
67 Chevy Custom Pickup- 3 on the tree 283- Restored
Fiance hates um all except the Monte- of course..
Mechanic at Karl's Chevrolet in Ankeny, Iowa

Yes, I`m still making them.
The thread below is the most up to date showing the changes and improvements I have made.
Mainly, the addition of an optional power outlet and I did away with the straps for a different attaching system.
Mike

https://www.fiero.nl/forum/Forum4/HTML/055991.html

[This message has been edited by TXGOOD (edited 04-11-2012).]

TX,
I pm'd you about an order.
Thanks!
bb

Great work! Question: can you offer a lock and key combination for the glove box? I am referring to the glove box over your right shoulder, in front of the firewall. I will await your answer....
Cordially,
kevin

[This message has been edited by kevin (edited 06-10-2013).]