Nope, not made anymore but they will run them for a few thousand if you really want them. Mine are 10" rears and 9" fronts. Rick B

quote Originally posted by SuperchargedV6: Nope, not made anymore but they will run them for a few thousand if you really want them. Mine are 10" rears and 9" fronts. Rick B

15",16" or 17"?

This is why I ask


the wife like's the look for her Enterra but just a tad bit larger

[This message has been edited by troyboy (edited 07-02-2012).]

quote Originally posted by troyboy: How about this, Concave with a Deep Dish? Could thids be the best of both worlds?

Not feeling the Asantie's. The black with orange looks cheap and compared to the HRE you currently have-there's no match. If you're looking for a center that is orange or something along those lines try Savanti's (mis-spelled). They have a 5-star split wheel with a orange center. I'm at work so I can't post a link right now.

I like Concave and Deep Dish. I just like my cars low and wide.

------------------
Car Thread:
86 GT
https://www.fiero.nl/forum/F...ML/085541.html

Concave is where its at.. dish is old school. But old school is cool too! But really, concave for me. That red notchie if f'ing sick!

quote Originally posted by troyboy: There is no wrong or right answer , just discussing trends. I like both and the new concave with lips, I'm trying to convince my wife that cars should have more than one set of shoes , she told me to justify it so I pointed to her shoe closet.......... Tonight I sleep in the dog house. But she didn't say no

That's why you turn the dog house into a man cave.

Now here's the ticket!

http://www.ebay.com/itm/20-...xp=mtr#ht_782wt_2537

quote Originally posted by madcurl: Not feeling the Asantie's. The black with orange looks cheap and compared to the HRE you currently have-there's no match. If you're looking for a center that is orange or something along those lines try Savanti's (mis-spelled). They have a 5-star split wheel with a orange center. I'm at work so I can't post a link right now.

As far as I know 16" was the largest and that is what mine are. No one was running 17" back then and 16"'s seemed huge until we seen larger in the 90's. Every now and then a set of the smaller width ones come up but most are 15" in that size. I will keep my eyes opened. Rick B

quote Originally posted by madcurl: Now here's the ticket! http://www.ebay.com/itm/20-...xp=mtr#ht_782wt_2537

GEEZ !!! What are they made outa silver and gold!?!?

quote Originally posted by hercimer01: GEEZ !!! What are they made outa silver and gold!?!?

Yep. Just about.

quote Originally posted by SuperchargedV6: As far as I know 16" was the largest and that is what mine are. No one was running 17" back then and 16"'s seemed huge until we seen larger in the 90's. Every now and then a set of the smaller width ones come up but most are 15" in that size. I will keep my eyes opened. Rick B

Thanks for the info, I'm going to call them to see if they could do them in a 18 X 9 , 19 x 11 set up for the wife. If they have to run them as one offs might as well ask for larger sizes.

(spoken in a deep voice) Get the deeeep dish.

Or...go for a combo of both concave and deep, like this:

http://www.ebay.com/itm/HRE...em2571ae79d9&vxp=mtr

The flood of front wheel drive cars sort of eliminated deeper wheels. With the hubs moved so far out to make room for transaxles the mounting studs end up being almost even with the fender lips. Any deep set wheels stick the tire way outside of the fenders. With some cars coming back with rear wheel drive, there starting to show up again for new cars. You can always find deep rims for older RWD cars.