Yes it will. The piping from the outlet of the compressor housing is made primarily of silicone tubing and couplers. Seeing as though the trueleo intake manifold places the throttle body in almost the same position (if not exactly the same position) as the stock manifold it should bolt right up.
Also, if your trueleo manifold does not already have provisions for an EGR valve pipe, you will not have to use the supplied manifold egr block off plate. One less thing to install!
Also, using the trueleo intake with this kit will really help make full use of the turbocharger.
[This message has been edited by Oslo (edited 08-07-2007).]