Hey! I got page Ten!!!! ------------------ Kendall (Icelander) Whitlatch '85 Fiero 2M4 - 5spd Isuzu '67 LeMans/GTO clone 6.5 litre TH400 All the rest aren't Pontiacs, so what does it matter?
[This message has been edited by Icelander (edited 01-17-2008).]
IP: Logged
12:50 AM
Jan 18th, 2008
rjblaze Member
Posts: 1159 From: Bethlehem, Pa., United States Registered: May 2006
Bob, I just read that you called for payment 10 days ago. Sorry I missed that notice. I've been monitoring my inbox for a PM but I really haven't had time to search for this thread as often as I would like. Now that I know I'll Paypal right away. You might try PM's to everyone still owing. It would have caught my attention earlier than this. Thanks for the good work. indydriver in L.A.
IP: Logged
05:55 PM
Jan 27th, 2008
rjblaze Member
Posts: 1159 From: Bethlehem, Pa., United States Registered: May 2006
Thanks for the reply......I assume you are Richard B.......got your paypal. I have updated the list to add James Hunt and indydriver as paid. I will be PMing the first three (again) and atomfusion to remind them.
Still no responses to PM's from FlyGuyEddy, 87 Fiero GT, and Imconvtd92 (?) yet. If I do not receive payment for these sets by my pick-up date, I will consider them not wanted anymore and put them up for sale.
Bob
[This message has been edited by rjblaze (edited 01-27-2008).]
IP: Logged
08:02 AM
Jan 29th, 2008
rjblaze Member
Posts: 1159 From: Bethlehem, Pa., United States Registered: May 2006
I have not gotten any responses to several posts and PM's from Flyguyeddy, Imtdconv92, 87 Fiero GT, and Atomfusion. It appears these people are not interested in the brackets that they ordered but have not paid for. Therefore I have four complete sets of 2 front / 2 - 5 degree rears brackets exdtra for sale. If you are interested in any of these sets, please post to this thread and PM me with your order.
Finally, since it has taken sooooooo long to get this last order finalized with enough interest and I now have run into people ordering sets (bogus orders?) but not paying, I regret to inform everyone that this will be the last run of brackets I will be getting produced. I have tried to help our Fiero community as best as I could by getting out a quality product for a very low price and it appears that the interest has completely died out. I thank each and every person who has ordered a set form me and I wish you all the best.
Bob B.
IP: Logged
01:57 PM
topher_time Member
Posts: 3231 From: Bailey's Harbor, for now. Registered: Sep 2005
Great news guys! The brackets are done. I am trying to get away from work early sometime next week so I can go get the ( about an hour ride from home.....2.5 hrs from work). I still have three extra sets available due to the people who ordered but still have not paid or contacted me. I'll let everyone know when I have them at home.
Bob
IP: Logged
06:12 PM
Icelander Member
Posts: 302 From: Snohomish, WA, USA Registered: Aug 2006
I'm trying to get down to Birdsboro (below Pottstown) one day this week if I can get out of work early. I work around the Irvington / Newark / Jersey City area in NJ. and the ride to my machinist is about three hours from there. I hopefully will have them by Thursday and should be able to meet you over the weekend (I had been planning a trip to my place OC Md. for my b-day, but my wife is really sick with a cold and the trip is probably getting scrubbed).
Sorry I replied back in Oct that I was interested and have periodically checked this thread. Since there wasnt alot of interest for a couple of months I havnt been frequenting this forum much. The forum also doesnt contact you when a reply has been posted.
let me look throught the thread and figure out the payment option. Sorry about this, I am still interested in them if I can have them.
They are still available for you.....I tried to e-mail you, but it got returned as being not found. I do take paypal and my addy is: rjblaze@verizon.net Please include your screen name in the comment section.
Thanks alot
Bob
Well that still leaves one set left for someone else who is interested....87FieroGT..no contact...out......Atomfusion...no contact...out.
[This message has been edited by rjblaze (edited 02-06-2008).]
I got some good news and some bad news. I'll do the bad news first.
The bad news is that I still have no contact from 87 Fiero GT or Atomfusion so they are both totally out.
The good news is that the last set appears to be spoken for by kslish.....awaiting payment
AND
The brackets are now in my posession and I should be able to get some out this saturday.....I'll update the list as to who's sets got sent....I'm shooting for all, but that could be tough.
Torquewench.....I really need your correct shipping address.....please PM me.
Bob
IP: Logged
08:24 PM
Feb 8th, 2008
indydriver Member
Posts: 233 From: Los Angeles, California, USA Registered: Sep 2002
That's great news! And if I understand correctly, you have a couple of extra sets available - NO WAITING! Here's an opportunity for a couple of lucky Fiero owners. Most of us have had to wait for months for this to come together. Good job rjblaze. indydriver in L.A.
IP: Logged
10:49 AM
Feb 10th, 2008
rjblaze Member
Posts: 1159 From: Bethlehem, Pa., United States Registered: May 2006
Hey guys and gals......just wanted to apologize....I did not get any of the brackets sent off saturday as I had hoped. The weather here was REALLY crappy (snow and ICE) and I could not get to the PO before they closed. All the sets are packaged and ready to ship.....I hopefully will be meeting Matt85GT this evening with his. I will get them off first chance I get.....work is going to be a bugger this week and I know I am not going home on Tuesday night (have to stay over in Newark, NJ due to a very early meeting and foul weather predictions). I will try to get some off from the PO close to my warehouse here in NJ. and will let you know who's got sent.
don't sweat it. things happen. more things happen when its frigid out. like last week, when my GT died in rush hour traffic. : ( it didn't like the bitter cold. so i've been working on the electrical system, and can wait patiently for the brackets.
Could someone please help with a source for the wheel studs? the little summary table lists them at 'parks federated', but i don't have such a place near me. is there an alternate source? and online source preferrably?
IP: Logged
06:32 PM
Matt85GT Member
Posts: 42 From: Danielsville, PA USA Registered: Oct 2006
All who ordered brackets: They are WORTH THE WAIT! High quality cuts, clean threads, no hanging slivers, A+ products!! I just cleaned them up with brake parts cleaner and plan on powdercoating them gloss black when round 2 of the nasty weather hits. 10*F is a little too cold to be in the shop playing :-)
IP: Logged
08:47 PM
Matt85GT Member
Posts: 42 From: Danielsville, PA USA Registered: Oct 2006
don't sweat it. things happen. more things happen when its frigid out. like last week, when my GT died in rush hour traffic. : ( it didn't like the bitter cold. so i've been working on the electrical system, and can wait patiently for the brackets.
Could someone please help with a source for the wheel studs? the little summary table lists them at 'parks federated', but i don't have such a place near me. is there an alternate source? and online source preferrably?
www.rockauto.com do a part number search 610323 under Dorman manufacturer. 10 are 1.15ea. plus shipping.
http://www.dormanproducts.com 610-323 is the official Doorman listing... It appears to be a longer version of the same stud used for 100 years on all kinds of GM stuff.
[This message has been edited by Matt85GT (edited 02-12-2008).]
This iswhat everyone is waiting for....I got many of them shipped today and most should be delivered by no later than Thursday (shipped 2-3 day priority) I need to send three more as I ran out of packing material....these will be sent early this week.