I can't figure it out from the pictures. Do the new dew wipes include the pads that slide on the window? Cause my pads are basically shot and scratch the window.
Thanks for offering those.
IP: Logged
04:39 PM
DIY_Stu Member
Posts: 2337 From: Republic of TX Registered: Jun 2007
Did you happen to get my MO recently? Just wondering, because I have the habit of worrying if it got lost on the mail or something. Mine has the address from Jeromesville ohio.
IP: Logged
09:00 PM
Apr 30th, 2008
DIY_Stu Member
Posts: 2337 From: Republic of TX Registered: Jun 2007
Yes new and never installed. I bought them to put on my choptop but since I can shape the rub tabs any way I want on my own sets then I have better control than with the OEMs. They were only removed for measuring for my remakes and display for comparison at the local car club show. I've had them since April and out of packages for about 3 months.
Preferred payment method is paypal. And they will be shipped USPS insured. Paypal stuart@diy-fiero.com
Are you still selling these??
------------------ What really matters is the size of your Flux Capacitor...
IP: Logged
11:40 AM
DIY_Stu Member
Posts: 2337 From: Republic of TX Registered: Jun 2007
If you're speaking of the OEM set that I had then no they sold in about 15 minutes after that post. If you are speaking of the replacements that I make yes I'm still selling them just don't have any made at this time.
IP: Logged
11:52 AM
PFF
System Bot
86blackse Member
Posts: 1778 From: Ga-TN state line Registered: Nov 2006
Sorry I have been out of pocket lately had some unfinished business to tend to the last two weeks which took up way too much of my time. I am now back and notice I have quite a waiting list starting up. GOOD NEWS though I have the metal parts being made for me know and will be getting more supplies in shortly. I have about 4 sets that I can make with what I have left and will be getting more supplies in. When that happens I'm looking to have 15 sets available at a time.
Sorry if I haven't replied to every ones PM's but I will get the waiting list time line together in short order.
IP: Logged
06:22 PM
Bruce Member
Posts: 2189 From: Ventura, California, USA Registered: May 99
We bought a set of these a little while ago and just got them on the car... Absolutely Amazing! You did a great job Stuart, I see now why they need the slotted holes too.
Anyone considering purchasing these, do it! They look great, fit perfect, and it's crazy how much nicer a door with dew wipes looks than one with the chunks of old material falling off.
With Rodney Dickman's dew wipe tool (little metal stick with phillips bit on the end) we managed to do both doors, start to finish, in just under an hour. The tool is not a requirement for installation, but it helped alot.
We'll be ordering another set for my car just as soon as possible.
IP: Logged
08:06 PM
May 10th, 2008
Englishrafe Member
Posts: 153 From: Lorient, FRANCE Registered: May 2008
We bought a set of these a little while ago and just got them on the car... Absolutely Amazing! You did a great job Stuart, I see now why they need the slotted holes too.
Anyone considering purchasing these, do it! They look great, fit perfect, and it's crazy how much nicer a door with dew wipes looks than one with the chunks of old material falling off.
With Rodney Dickman's dew wipe tool (little metal stick with phillips bit on the end) we managed to do both doors, start to finish, in just under an hour. The tool is not a requirement for installation, but it helped alot.
We'll be ordering another set for my car just as soon as possible.
Thank you so much for the compliment. I try my best.
IP: Logged
11:23 PM
DIY_Stu Member
Posts: 2337 From: Republic of TX Registered: Jun 2007
OK Guys and Gals I have a good plan started but first I have to get rid of about 6 sets. Then there will be another short wait then about 10 - 15 sets will be ready at once. This is the future plan to have 10 ready at any given time. The Felt covered tabs will not be offered in the kits but they are readily available from The Fiero Store as Part # 64937 for $5.95 each.
Here's the list I have so far. rixthetrick 1set PM SENT msarq 1 set PM SENT T-Herms 1set PM SENT 86SEin93003 1set Shipped Ambfiero 2 KITS PM SENT RC01 1set fiero GTman kduvey 1set AKURsedX 1set PAID msara 1set 86blackse 1set MRBlue87 1set Bruce 1set old1 1set Nashville Fiero 1set my-fiero 3sets Jamister1 1set Melody 1set Englishrafe 1 set SJMaye 1set? Songman 1set DeLorean00 1set Fiero-in-Paradise 1set Flimbob 1set PAID McNasty 1set robiwon1 1set RCW 1set PAID Let me know if I left your name off.
[This message has been edited by DIY_Stu (edited 05-23-2008).]
IP: Logged
11:39 PM
PFF
System Bot
May 15th, 2008
86SEin93003 Member
Posts: 274 From: ventura,ca USA Registered: Feb 2005
At some point, yes. I am in the middle of an engine rebuild and it is becoming a black hole for cash. I'd like to get it done first. I will probably be in the market in mid-summer. Will you still be making these then?
IP: Logged
04:22 AM
DIY_Stu Member
Posts: 2337 From: Republic of TX Registered: Jun 2007
Ok I tried to send out pm's and have been shown that sending pm's is a waiting game. So if you need your set tell me you are ready now in a PM and I will take them in order. first 4 sets sold will be these. next sets will take about a week or more since materials have to come in.
IP: Logged
10:17 PM
May 21st, 2008
86SEin93003 Member
Posts: 274 From: ventura,ca USA Registered: Feb 2005
Ok I tried to send out pm's and have been shown that sending pm's is a waiting game. So if you need your set tell me you are ready now in a PM and I will take them in order. first 4 sets sold will be these. next sets will take about a week or more since materials have to come in.
