I have too many Fiero parts taking up room in the garage that I won't be using. I have a bunch of interior parts in boxes, SE & GT body panels, 4cly & 6cly engine parts, and a few aftermarket parts. Bigger items are pick up only in Indianapolis, IN. Off hand this is what I know I have -5 complete doors $20 each -wiring harnesses for interior, under hood, engine, lights, ect... Not sure whats what any more, have a box full of wiring harnesses from SE and GT's. -2 Notchback clips $15 each -3 Notchback decklids, some better then others. $10-15 each -Complete 2.5 4cly motor out of a 85SE 5speed. Runs GREAT! Right under 100K miles. $150 -Tons of extra 2.5 motor parts -Top end 2.8 parts -1'' Sway bar with poly bushings -door ground fx with mounting hardware -6 gauge clusters. No clue what year/models they came out of anymore. 120mph and 85 mph. -16 SE side marker lights for front and rear. some better then others -Interior switches -Tons of suspension parts 84-87 -Lots more to come
If you would like pics of a part LMK. I would like pick up only on most the bigger items. Or come with a trailer and take it all for cheap These parts are taking up a quarter of my garage now lol. Will accept trades. Looking for 3800SC performance parts, air ride stuff, tools, and other fiero stuff
IP: Logged
01:00 PM
PFF
System Bot
fiero77 Member
Posts: 389 From: Bloomington, Indiana Registered: Jan 2002
Whats the mileage on the 120 mph speedos and are they fully functional? How much do you want for one? Thanks Also do you have any good front or rear fascias from SE/GT or 87/88 coupe?
[This message has been edited by fiero77 (edited 02-24-2008).]
Whats the mileage on the 120 mph speedos and are they fully functional? How much do you want for one? Thanks Also do you have any good front or rear fascias from SE/GT or 87/88 coupe?
This one here reads 22XXX, I took out the rpm gauge to use in my own car so basically I just have the 120mph gauge that you can swap into your cluster. I have one front GT bumper thats in decent shape. Just needs sanded down and repainted. I was going to cut off the bottom of it to make another lower spoiler. Also, I have 3 rear GT bumpers. One with round molding, two with ribbed molding. And one SE rear bumper off a 85SE. Asking $10 for the 120 speedo. Shoot me a offer on the bumper(s) if interested in them. I have decided to part out my 84 SE. Hit a deer in it awhile back that messed up the drivers side. Engine is on its last leg, burns a qt of oil a week. After hitting the deer, I must of blew out the master cly when slamming on the breaks. Only parts I'm keeping off of it is the break cals, complete front suspension, and the frame from the tires off so I can throw that on my 87GT I took under a minivan. Heres some pics!
IP: Logged
02:59 PM
fiero77 Member
Posts: 389 From: Bloomington, Indiana Registered: Jan 2002
I would like the roof panel off the car your parting out. Would need to wait till a good warm sunny day first to make sure we could get it off in one piece. That is of course unless you were willing to let me bring a sawzall and cut the entire roof off the car. Let me know how much $ you would want. If you really are wanting to get rid of these parts for cheap I would be bringing a truck and would be interested most of what you have listed except for the engine parts.
hey man if thats the sway bar i gave you i want it back.
I still have your sway bar, the one I am selling is powder coated black. I bought it already powder coated for my 87, but decided not to run a sway bar after all.
Is this i/p from a 4 or 6 cyl (I need 6 cyl tach)?
Would you sell just the tach/oil pressure gauge from this i/p ?
if so, how much shipped to 27613, if not how much for the complete i/p shipped to same place?
Thanks
I'm not sure what car it came out of, anyone know how I can tell if it is out of a 4cly or 6? If it is out of a 6cly I will sell the the tach/oil gauge out of it.
Thanks, Ryan EDIT: I think it is out of a 4cly b/c it redlines at 5K
[This message has been edited by greengoblin0129 (edited 02-25-2008).]
I would like the roof panel off the car your parting out. Would need to wait till a good warm sunny day first to make sure we could get it off in one piece. That is of course unless you were willing to let me bring a sawzall and cut the entire roof off the car. Let me know how much $ you would want. If you really are wanting to get rid of these parts for cheap I would be bringing a truck and would be interested most of what you have listed except for the engine parts.
Feel free to take a sawzall to it lol. I'm cutting off the frame from the tires up to section onto my wreaked 87. Main reason why I want to get rid of most the parts is because I have no room to work in my garage haha. Think I have parted out 7 of them now, so theres a mixture of 84-87 SE and GT parts. If you want to come down and pick them up I will definitely give you a great price! Let me know
I'm not sure what car it came out of, anyone know how I can tell if it is out of a 4cly or 6? If it is out of a 6cly I will sell the the tach/oil gauge out of it.
Thanks, Ryan EDIT: I think it is out of a 4cly b/c it redlines at 5K
That's an '84 tach cluster- it has the battery gauge in the tach as opposed to an oil pressure gauge. That means it's for a 4 cylinder...
[This message has been edited by FieroFanatic13 (edited 02-27-2008).]
IP: Logged
10:55 AM
FieroFanatic13 Member
Posts: 3521 From: Big Rapids, MI, USA Registered: Jul 2006
These parts are taking up a quarter of my garage now lol. Will accept trades. Looking for 3800SC performance parts, air ride stuff, tools, and other fiero stuff 
