87GT, Auto, Gold, Tan interior. Running, driving car. high miles, has a lot of good parts. LMK what you need.

is it a fastback? if it is theres a couple things id be very intrested in...
taillights and rear 1/4 windows are the main things.

Left taillight pretty nice, very faint delamination along top edge. No cracks or splits. $75.00. RH side intact, a little more delamination along top section. Again, no cracks or splits. $45.00.
Pass 1/4 window cracked. Driver side OK, but it has some of the internal highlights in the clear plastic area. Only noticeable up close. $50.00.

Are the rocker panels in good shape? I need a passenger side but if both are good I may be interested.

88Ironduke

fastback decklid and driverside fender?

[This message has been edited by jgrotzin (edited 06-23-2008).]

do it have a good trunk gasket? if so how much?

also if hookedonspeed passes id like the Driver side 1/4 window $50.00.


thanks
=todd=

Pm'd all. No good trunk gasket.

What's the chassis like?

no pm for me

=todd=

Front bumper cover?

pm sent

sadly i have to pass on the windows/taillights atm, need to fix some mechanical stuff before i worry about hte body

PM sent
need the gauge cluster

This must be the 87 that you told me about. Just put me in line for the fuel tank.

Headlight wiring and module?
PM sent

do you still have the steering column? I need a tilt column with keys. How much to ship to 66071?

PM'd on the steering column.

Have the Headlight conversion system complete with instructions, $140.00, Sub woofer system $125.00

quote Originally posted by tmur115: also if hookedonspeed passes id like the Driver side 1/4 window $50.00.

i'm still interested if its still avaliable

=todd=

If you have the seat belt trims, you know, the plastic things that hold the seatbelt and are mounted to the outer sides of the seats... How much?

http://i19.ebayimg.com/04/i/000/f9/c9/f4a3_1.JPG

------------------
1986 GT Fiero Owner & Enthusiast
For Fiero updates, visit my site and don't forget to click on the ads!
http://educatorstop15.we.bs/fieropage.htm

Only have a passenger side, sorry.

This has the dual exhaust correct? If so I may be interested in the exhaust tips if they are the "trumpet" style ones... How much would you be asking? LMK via PM please.

-Brian

[This message has been edited by Xerces_Blackthorne (edited 06-26-2008).]

I need the front side marker lights (both sides) as well as the forward-most tip pieces of the black side trim. Any or all of these pieces.

PM sent

Rear side marker lights?

quote Originally posted by Paulv: Only have a passenger side, sorry.

how much Paulv ???

------------------
1986 GT Fiero Owner & Enthusiast
For Fiero updates, visit my site and don't forget to click on the ads!
http://educatorstop15.we.bs/fieropage.htm

how about an e-brake lever and bracket?

PM sent

How much for the rack and pinion (balljoint to balljoint), steering knuckles(no rotor/hub), and caliper brackets(no calipers). Zip 14150.

Thanks,
Mike

bump

I don't plan to remove the steering rack or front end components. Too big a job with hand tools.

So your NOT parting the car out then? Didn't realize 9 bolts and 8 nuts were out of your experiance range. Sorry!

Drivers side door complete?

good quality rear bumper? Pm me with a shipeed price to 32904 if it is in good shape(no tear/holes, paint doesnt matter.)

Round trim right? If so, all the way around I need.

Need engine bay insulation in good condition for the passenger side. The piece around the battery tray and side wall. Got that?

[This message has been edited by sjmaye (edited 07-06-2008).]

PM's sent to all questions above

I need a passenger side power mirror glass and the rear brake shields.

I could also use a passenger side power mirror glass and a passenger side manual trans axle.

And a passenger side GT quarter glass?

Thanks.

[This message has been edited by rwlekey (edited 07-07-2008).]

Decklid vents and brackets? Have these?

PM's sent

How much for the fuel filler tube?

Sean

Looking for the deck lid brackets. Also, looking for a complete wiring harness.