I am just waiting for the company to get back from the holidays on the 8th of January. Then they should start cutting the buckets. Shouldn't be long now.
[This message has been edited by Fiero1Fan (edited 01-04-2007).]
IP: Logged
04:14 AM
rjblaze Member
Posts: 1159 From: Bethlehem, Pa., United States Registered: May 2006
i'm interested int he rectangular - i didn't see it specified anywhere but these are still pop up headlights right? not fixed in place like some of the cheapo kits?
[This message has been edited by Kohburn (edited 01-09-2007).]
I am very interested in the twin round set up. So put me down for a set.
Some questions if you please,
Aside from buying the buckets, do I just need to order 2 of each of these HL68136 HL68137? Or do I also need to order the adjusters and mounting plate? (Also listed on the website)
Is there a thread discussing how to install this set-up and make headlamps only come up half height?
------------------ Happiness isn't around the corner... Happiness IS the corner. ZZ4 Powered !!
NO adjusters are needed for raising the buckets because they are only half as high as the OEM lights. You will need the 2 sets of lights, 2 Driving (low-beams) and 2 Brights (hi-beams). When I buy the lights here in Germany they come with the mounting screws so you'll need to check and see what you get there. There is no need of a mounting plate. The buckets will come with a How To plus I'll be posting pix and the How To here.
IP: Logged
11:26 PM
Jan 12th, 2007
Oreif Member
Posts: 16460 From: Schaumburg, IL Registered: Jan 2000
NO adjusters are needed for raising the buckets because they are only half as high as the OEM lights. You will need the 2 sets of lights, 2 Driving (low-beams) and 2 Brights (hi-beams). When I buy the lights here in Germany they come with the mounting screws so you'll need to check and see what you get there. There is no need of a mounting plate. The buckets will come with a How To plus I'll be posting pix and the How To here.
Excellent! Thanks for all your hard work to make this possible.
IP: Logged
10:02 AM
Angel_Valentino Member
Posts: 110 From: Chicago,IL,60639 Registered: Mar 2006
Just got back from the machinists shop. They will have the pieces cut by the end of next week for 30 sets of the twin rounds and 10 sets of the blank face buckets. They will then go to the welders for 3 to 5 days for the welding and galvanization. Then I'll have them in my hands for shipping. The 20 sets of rectangular buckets should be ready one week later.
IP: Logged
11:22 AM
Intel Member
Posts: 752 From: Helsingborg, Sweden Registered: May 2002
I'll post the list in descending order so everyone can see where they are located. PLEASE don't anyone worry about not being in the list of the first 30, the second set of 30 have already been ordered and will be made as soon as the 20 sets of rectangular buckets are finished.
Sweet! Can't wait to see some install pics that you all will be posting once they arrive. You'll love the new look. Here's another comparison shot with stock headlights to wet your appetites some more. hehe.
IP: Logged
01:03 PM
Kristian V Member
Posts: 217 From: Göteborg / Sweden Registered: Feb 2006
