You have a point.....just forget about the harness for now....I'll take the twin round bucket set....maybe I'll get the harness later if I can't make my own.
Verifying in for 1 set of the twin round set and possibly for the wiring harness... Do you have the harnesses done or will you be supplying a reccomended wiring diagram?
And can you post a photo of the wiring harness?
Also has anyone verified that the hella 90mm round lamps come with the adjusters? Every site I find them at list the adjusters seperately like they are an option that need to be purchased seperately.
[This message has been edited by timgray (edited 01-21-2007).]
Do you have the harnesses done or will you be supplying a reccomended wiring diagram?
And can you post a photo of the wiring harness?
Also has anyone verified that the hella 90mm round lamps come with the adjusters? Every site I find them at list the adjusters seperately like they are an option that need to be purchased seperately.
I will be offering a wiring harness for those that need it. Price for the harness will be known by Wednesday. I think it would be cheaper to make yourself if you have the possibility. I will make a schematic and post it here for everyone to see. Parts per bucket will be 4 wires 12" length, 2 H9 connectors (female) and 1 H4 connector (Male).
About the Hellas coming with the adjusters. Here in Germany they come automatically with the adjusters. You'll need to verify with the company you order them from on what is supplied.
IP: Logged
03:49 AM
topcat Member
Posts: 5486 From: Charleston SC Registered: Dec 2001
I will have the pieces by Friday. I was at the machine shop today and everything is going well.The first of next week they will be welded and galvanized. The first sets will be ready for shipment by the end of next week!!!! JooHoo!!! Finally. I will have the shipping costs tomorrow.
IP: Logged
02:17 PM
Scythe Member
Posts: 1055 From: Burke, Virginia Registered: Apr 2003
Also has anyone verified that the hella 90mm round lamps come with the adjusters? Every site I find them at list the adjusters seperately like they are an option that need to be purchased seperately.
This is a quote from the Susquehanna MotorSports web site where the 90 MM lights are shown:
"Each lamp includes an H9 bulb and adjuster screws. The H9 connector is NOT included and must be purchased separately. Mounting plates, stamped from Galvanized Steel, are available."
Kevin
IP: Logged
03:12 PM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
Verifying - one set of twin round buckets - NO harness.
Thanks.
Rob D.
------------------ The Dirty Rat Chopped, dropped and just plain NASTY! Choptop Targa #1 383 Stroker MPFI with N2O 1" Drop 3" Chop 11" Brakes 19" Motegi Roja's wrapped in BFGoodrich Gforce T/A KDW-2 rubber RCC Coilover Suspension
[This message has been edited by chester (edited 01-22-2007).]
I'm looking to see if another place will be cheaper. The German post said it was so expensive because of the weight. The buckets are of steel not plastic.
get an account with fedex and they give a pretty good discount...and it doesn't cost anything to get one. Dave
I don't have my customer number yet but the normal price for a 3 kg box to the US is listed as 128.35€ so I doubt the customer price will be anywhere close to the 40€ from the German Post. We'll see though when I have the number.
IP: Logged
05:28 PM
Paulv Member
Posts: 1530 From: Lisle, Il, (Chicago Area) USA Registered: Nov 1999
What about the harnesses? Are they included in that price? Will they be ready to ship with the housings? Would it be OK if I just gave you my FedEx account # and you could just have FedEx bill me direct. Also, any problem if we want to combine an order in one box with another buyer in the same area?
No the Harness is not included in that price. If Fedex will do that then it's OK with me. You might be able to have them just pickup the package from here for you. Shipping more than one set in a box is possible but then we go over the 5 kg weight limit and the price really goes up.
Now about the harness for the twin rounds. I spent all day today going to several companies that make automotive connectors. I think I have now found 2 companies that will sell me the needed connectors for the harness (1 x H4 male and 2 x H7 female). I should have their price quotes by the end of the week. Then I'll know for sure the exact price for me to make them.
I'll keep you posted.
I'll also make a schematic of the wiring so that if you want you can make the harness yourself.
2.5 kg per set with box and packaging. They are made of 2mm galvanized steel.
Ah! OK Just a wee bit surprised at first. No problem.
I think I might be brave and attempt the harness myself Timo. After looking at the parts it doesn't look like it can be all that difficult. Here's a suggestion for those who may want to try doing their own: http://www.comagination.com/parts.htm
I will have the shipping costs tomorrow.
was the cheapest way to ship ANYTHING!!!
