With all the discussion of speeding up power windows, I decided to make something. I made 2 sets one for me and one to sell. If the intrest is there I will make more. I got it down to 1 box per window. You have to cut/splice the wires by the switch to install. This won't help with old grease in the tracks, or worn out motors. This provides more current to the windows, It has helped on every car I tested it on. If your windows are allready 5 secs or faster going up or down, the speed increase will be marginal. This is to help slooow windows. To bring them back to more new like condition.
so just to make sure i have an idea of where you are putting this box its in the middle of the car correct? what all do you have to take apart to wire this in?
IP: Logged
11:22 PM
Apr 11th, 2009
sardonyx247 Member
Posts: 5032 From: Nevada, USA Registered: Jun 2003
Question. "Increases current". Are the motors now drawing more current? Is this still well within the stock circuit protection?
Or--have you just improved circuit characterists for more effecient current flow?
(No- I do NOT want to know exactly what you've done or how it works, or any other details--just want to know if my circuit protection is still adequate)
ok just not sure if it was like the one i have to make the window work at al times even with the key off. now would i still be ok to use this with the kit i used? this is the one that stuffed in the fuse box
IP: Logged
10:24 AM
sardonyx247 Member
Posts: 5032 From: Nevada, USA Registered: Jun 2003
ok just not sure if it was like the one i have to make the window work at al times even with the key off. now would i still be ok to use this with the kit i used? this is the one that stuffed in the fuse box
I know the kit you are talking about, I dont know how that is wired up. I would imaginge it would work with it, but I wouldn't know how to wire it up with out knowing your kit. so my answer is I don't know
IP: Logged
03:08 PM
Apr 13th, 2009
sardonyx247 Member
Posts: 5032 From: Nevada, USA Registered: Jun 2003
I know the kit you are talking about, I dont know how that is wired up. I would imaginge it would work with it, but I wouldn't know how to wire it up with out knowing your kit. so my answer is I don't know
I have this kit , and if the kit SARDONY is selling is for increasing the speed i don't know why it wouldn't work .
[This message has been edited by Robert 2 (edited 04-15-2009).]
IP: Logged
10:30 AM
Apr 16th, 2009
sardonyx247 Member
Posts: 5032 From: Nevada, USA Registered: Jun 2003
sounds interesting. could you PM me some specs about it? and some pictures? im interested in its design and what makes it tick. dont worry about me coping your design or anything like that. i have a whole different idea on making power windows faster. well 2 seperat ideas. ill tell you in the PM
I want one. Do you have any videos of before and after?
Ok, here are the only vids I have, of the first car I tested. which is a parts car, with a jump box hooked up. (High amps made it fast anyway) and that was in the design stage, when I threw it together for testing. A much better product now.
Is this similar to the device Rodney Dickman was promising a while ago?
I have no experience with Rodneys device, He didn't ever make a product, so I made one. so by the time he comes out with his, I'm sure his device will be similar to mine at this point.
Originally posted by sardonyx247: I have no experience with Rodneys device, He didn't ever make a product, so I made one. so by the time he comes out with his, I'm sure his device will be similar to mine at this point.
Fiero Parts And Acc's Web Page: All new web page!: " TARGET=_blank>www.rodneydickman.com[/b][/SIZE] Rodney Dickman's Fiero accessories 7604 Treeview Drive Caledonia, WI 53108 Phone/Fax (262) 835-9575
IP: Logged
02:37 PM
PFF
System Bot
americasfuture2k Member
Posts: 7131 From: Edmond, Oklahoma Registered: Jan 2006
Ok, here are the only vids I have, of the first car I tested. which is a parts car, with a jump box hooked up. (High amps made it fast anyway) and that was in the design stage, when I threw it together for testing. A much better product now.
Before
After
I would be extremely happy if mine were at least like the "before" you are showing.
IP: Logged
05:04 PM
Feb 9th, 2010
Zefyr Member
Posts: 37 From: White River, NV Registered: Aug 2005
Thank you Sardonyx. Your power window kit is awesome, easy to install and now they work better than ever. Thank you again! I would highly recommend this to anyone with slow windows.
IP: Logged
08:30 PM
Lambo nut Member
Posts: 4442 From: Centralia,Missouri. USA Registered: Sep 2003
First of all why are you posting in my mall thread? with only drama?
And to correct you, rodney had an idea/not finished product he was testing, which was NOT for sale, at that time. The "idea" is old anyway, there have been products out for other cars for years. My Product has been "out" for sale for almost a year now. Rodney just came "out" with his.
My Product has been "out" for sale for almost a year now. Rodney just came "out" with his.
Rodney came to the forum with the product idea and some proof of concept samples. You then stole his idea and beat him to market knowing that Rodney was going to spend a considerable amount of time refining his product. In the meantime you made plenty of jabs at Rodney in the threads about this concept (some of which wern't your threads) and now you can't handle a few jabs in your own thread?
Sorry but I don't feel sorry for someone treats our established vendors as you have.
IP: Logged
11:41 AM
Lambo nut Member
Posts: 4442 From: Centralia,Missouri. USA Registered: Sep 2003
First of all why are you posting in my mall thread? with only drama?
And to correct you, rodney had an idea/not finished product he was testing, which was NOT for sale, at that time. The "idea" is old anyway, there have been products out for other cars for years. My Product has been "out" for sale for almost a year now. Rodney just came "out" with his.
Sorry, I did not realize you were in control of what and where I can post........seriously big guy.
Drama, again really? You said Rodney "didn't ever make a product". If he had no product, what did he send the guys to test more then a year ahead of your 'idea"?
quote
Originally posted by Jefrysuko:
Rodney came to the forum with the product idea and some proof of concept samples. You then stole his idea and beat him to market knowing that Rodney was going to spend a considerable amount of time refining his product. In the meantime you made plenty of jabs at Rodney in the threads about this concept (some of which wern't your threads) and now you can't handle a few jabs in your own thread?
Sorry but I don't feel sorry for someone treats our established vendors as you have.
There you go. Guess I'm not the only one that sees this.
