My car was just wrecked in the front. I was on the highway and there was a car sideways in the middle of the road, probably due to an ice patch. The lights were on and someone was inside. I had a choice to make, possibly kill someone or definitely hurt my Fiero, and I chose the latter. The front end and 75% of the plastic is screwed up. The worst part is, the car that made me have to go off the road to avoid killing the driver took off, and I don't have collision insurance, so I won't be getting any insurance money since they bailed. So much for doing the right thing.

Anyways, the car is getting parted out. The featured item will be an engine swap! Here are the stats.

----------
ENGINE



204HP - ~240 Ft/Lb TQ

3.4l Firebird V6 with ~43k miles on total engine rebuild - ~83k miles on engine total
Trueleo Intake - If you don't know what this is, look it up. They are about 700 dollars and add a lot of power.
Crane 1.6:1 Roller-Tipped Rockers
17 lb/hr Fuel Injectors
Ported Lower Intake
All Stainless Steel Vacuum Lines
Stainless Steel Braided EGR Tube
Darrell Morse 57 MM Ported Throttle Body
Ported Exhaust Manifolds
Spintech Hi-Flow Muffler
Aftermarket Hi-Flow Cat
Some sort of Corvette Exhaust Tips
Replaced Water Pump
Rebuilt Distributor

----------
TRANSMISSION

3.65 4spd. Shifter cables have been replaced and will come with the swap along with the shifter if you need it. Not much to say...it shifts smooth and easy, doesn't grind or anything. It's a lot smoother than the other 3.65's I've had.

----------

Engine runs like a top, and sounds great. No mechanical issues whatsoever. Revs super clean, idles perfect...I can't stress enough how well this engine runs. It is custom tuned and will come with the original manifolds/etc. It is clean on the inside as well. Most V6's are grimy as hell when you look into the oil cap, but not this one.

This swap will be on a cradle already mounted and ready to go. Pull yours out, put this one in, and that's it. It would be a one day swap for most people. A shop could even do it for you. Just tell them you want a remove and replace job and pretend the new cradle is the old one. I called a few shops around here and they want between 500 and 850 to do it if you didn't want to do it yourself.

I also have fastback tail lights, a corvette tail light conversion, OEM sail panels in 9.5/10 condition, leather seats, LeBaron swap brackets, 5 spoke 16" wheels with tires, and some other stuff.

I'm asking 2k. For the amount of money in this engine and the intake coupled with the time saving and the transmission included, that is a great deal. Also will trade/trade with cash for good running manual transmission Fiero.

OTHER GOOD STUFF!

Hahaha. Yeah, I don't blame you. If I saw a Trueleo intake for 250 I'd be whipping my wallet out faster than you could say "flabberdash".

And if I saw one for 100....well, you get the idea.

But I just decided all the fastback stuff will officially be for sale.

Here are the prices -

I WENT BY WHO CONTACTED ME FIRST IF TWO IDENTICAL OFFERS WERE MADE, WHICH HAPPENED MORE THAN ONCE. If you see the best offer at an offer you made but your name is not beside it, that means someone else made that offer first. Everything will be sold on a Best Offer basis.

Stock Sub and Subwoofer Housing with New Subwoofer - SOLD

Nice 4-Spoke steering wheel - 25

Decent Dash - 50.00

Decent 4spd Silver Shifter Bezel - 15.00

Excellent Silver Gauge Cluster Bezel - 20.00

HID Headlight kit with EVERYTHING needed to do the 15 minute conversion - 175.00

Complete V6 Intake with Throttle Body, Plenum, and Silver Intake Below Plenum - 175.00

Authentic GM Service Manual for 86 Fiero with Black Leather Covers And Fiero Emblem - 45.00

Any Plastic Interior Trim Piece - 25.00

Nice Doors With Power Everything - 75.00 Each Pickup Only

Set of 4 Loaded Fiero Calipers that work Very Well and are Painted Red - 100 OBO

Full Set of LeBaron Brake Swap Brackets - 100

Prothane Total Polyurethane Kit for 84-87 Fiero NEW IN BOX - 100

Pioneer AVIC-F700BT head unit FITS GREAT IN FIEROS. I Have one installed in my personal car. It is a Double DIN Touchscreen/Navigation/Carputer/Does Everything Unit - 350

Set of 4 Stock 14" Wheels with Tires - 100 OBO Pickup ONLY

Vette Tail Lights - I'm keeping them

Fastback tail lights are for sale again. 200 dollars + shipping.

OEM Sail Windows - Sold

Leather Seat covers in 8/10 Condition - Sold

Fastback Wing - Keeping it

Entire Fastback Setup Ready To Install With Wing/Clip/Tail Lights of your choice/Sail Windows All in Great Condition - 700
I'll wait a few more days and see if anyone wants the whole clip, and if not, it will be parted out to the people who have made the best offers IF I decide to sell them that way.

Nice set of 15" Wheels that fit a Fiero Well - 200 OBO
Pics of Wheels



Also, pretty much everything out of the interior and front hood is for sale. If I missed something PM me! The whole car is getting parted out aside from the engine/transmission stuff!


Call me at 317-354-7360 or PM me.

------------------
86GT Modded 3.4l Pushrod V6 with Trueleo

PM Me if you need:
Lebaron Brake Swap Brackets
38004.9l Motor/Transmission Mounts
Fiero Rotor Hubs for Brake Swaps
Or any other custom fabricated parts! My prices are very low.

[This message has been edited by MadDanceSkillz (edited 01-12-2010).]

Man that bites... ...sorry for your loss! Hope you are ok.

[This message has been edited by timcha (edited 01-05-2010).]

I got cut up pretty bad and I think I have 2 broken ribs. It hurts to breathe. lol. I don't have health insurance and the other car fled the scene so I just have to tough it out with some Tylenol, which is not working very well.

Really sorry to hear this. Can't you go to a County medical center ? Here the County operates quite a few Medical centers that will treat you reagrdless. You should get some kind of care so any broken bones heal correctly. The police should definitely go after the guy who was involved and left the scene.

I know how to set bones. Ribs are kind of like a broken toe...there's not much you can do about them. The tissue around them holds them in place, though, so they'll heal just fine. Just hurts like a *****. Anyways, onto discussion about the swap!

I hope your alright and thiis slant turn you off fieros

Nah, I'm already looking for another Fiero. These things are a lot tougher than people give them credit for...I smashed through 3 guard rail posts and broke 3 steel cables with virtually no frame damage. The plastic is pretty much destroyed though and the wire ripped off my headlights.

Sounds like a sweet deal for someone looking for a quick, reliable, affordable, high hp swap!
This "should" go quick...

Price for the tail lights?

Errrrrr........I hate to ask while you are in moarnng and all.......but what color are the seats and what do you want for them?

I am really sorry to hear what happened, it could have been a lot worse had you not done the right thing to miss the other car. Glad to hear that you are at least okay for the most part.

Is the 2K for just the engine or the whole car itself, or should I say what is left of the car Do you by chance have any pics of the engine and the car?

Thanks,

Ken~

Don't worry, I'm over my grief.

The tail lights are -

200 for good uncracked stock GT set. Not just the lenses, these come with everything.

200 For the Corvette tail light conversion. Also comes with everything. It fits in the stock location with no mods and uses 2 84 Corvette tail lights. Also has the PONTIAC that lights up in the middle.

As far as the seats, they are 88 leather seats in decent shape. 8/10 or better. Just make an offer.

quote Originally posted by timcha: Errrrrr........I hate to ask while you are in moarnng and all.......but what color are the seats and what do you want for them?

This is what the seats look like that are in the car, As of a couple of weeks ago at least:


[Image out dated and deleted]

[This message has been edited by JohnWPB (edited 01-05-2010).]

No, those were replaced. I immediately sunk about 1,500 dollars into the car as soon as I got it replacing almost all of the interior, doing some stuff to the engine/etc.

if you decide to sell the sails, i need a pair and have 100 in paypal just waiting.... oh lol.... i hope you feel better....

lmk
=todd=

Any good tricks for getting the sail panels off unbroken? A buddy of mine said it can't be done...

fishing line for the sail panels. piece of cake. Feed it through using the smallest metal item you have (screwdriver) and just "cut" it off by walking it around the edges.

Thanks, Carver. Any word on your car?

If it is all plastic damage on the front end, why not buy the front end parts and fix it bro?

------------------
-Brian

My 87 GT Poly Suspension Upgrade (all pics) thread https://www.fiero.nl/forum/Forum2/HTML/094633.html

Every piece of plastic on the entire car other than the fastback clip (Miraculous, huh?) is toast. It also ripped off both headlights and all the related wiring. 2 flat tires. All glass but one window broken. And God only knows what happened to the bottom of the car. The engine and trans are fine, but I don't know about the rest of it. It's just not worth the trouble...

I just bought a 4cyl 5spd in great shape with all leather and lots of extras for 500 bucks because it has a bad slave cylinder (So I think). Unless someone makes me an offer on my engine swap soon it's going into that car and the fastback clip with it. I will still have a set of tail lights, the seats, and lots of interior for sale though.

How much are you looking to get for the seats? Are those gray or tan? Pics?

I have 2 people in for the seat covers at 200 already...but it's an OBO situation, so if someone offers me more it's still for sale.

do you have the dyno sheet for that engine?

Nope...the shop I took it to to get it tuned might have it in their records, though. When I got it it required premium gas and was running on the rich side so I got it dyno-tuned.

If the sail panels are still up for grabs then their sold. How much for the intake if you sell it.

Looks mine mine is possibly available. I'll try to give you a call this afternoon.

Where in Indiana are you? I am in NE Ohio. Just interested in finding out how far I am from you.

Also, you REALLY should be looked at by a doctor after a bad accident like that.

Muncie. NE Imdiana.

Are the sail windows sold? And will you sell the intake?

I guess this means you are now not going to sell the Vette tail lights now?

BTW, Sell the sail windows to Antuzzi, then wait for one year to ship them LOL

(Sorry....inside joke)

[This message has been edited by JohnWPB (edited 01-06-2010).]

Low blow john . And btw. Headliners are a pita to ship.

Might sell the intake...and I'm pondering whether or not to keep the fastback for a fastback swap, and if so which tail lights to keep.

I also have a complete V6 Intake with throttle body. 175 takes it. Real good shape, paint and all.

If you do sell the intake I have first dibbs

PM me with an offer on the intake. It has a K&N Air filter I'll include with some recharging stuff as well

I'm real bad at making offers. Shoot me a price then we will go from there.