Because if GM made it for the Fiero I probably have it. Yep, I gotta clear it all out and that means all the rarest, most highly sought after, most awesome Fiero stuff in the world will be SOLD; Racing parts, recalled parts, popular parts, hard to find parts.
I'm parting this 1986 GT fully loaded. T-Tops are gone already and the engine is going into another car but the rest is there. Whatcha need?
I'm also parting a 1984 Indy. Badges are on eBay, the rest is there.
Then check my list below for more goodies coming over the next few weeks including:
Convertible kit for your Fiero (sold) Complete T-Top kit with NEW ORIGNAL OEM FACTORY SEALS! (sold) Super-Duty Racing Parts (many parts still left) Trannys - Getrag, Isuzu, 4-Speed, Auto. PM for details. Original POWER STEERING UNITS! (sold) 1 Indy for sale (sold) 1 1986 GT for sale (sold) Every '88 part imaginable TRIM OF ALL Colors and Types OVERROOF SCOOP (sold) ENGINES NORTHSTAR CONVERSION KIT...COMPLETE with engine, cradle, wiring harness, etc. (sold) Wings (white, red, gold, black) - (All sold) 4-Banger Stuff V-6 stuff GT lense (sold) Sail panels (sold) Rims Manuals, books, literature, photos, rare ephemera, magazines, etc. AND ON and ON and ON.
call 2nd dibbs on the t-tops (2nd to Mister). and interested in the trannys, what do you have for transmissions? and a red fastback decklid of you have one (wing or no wing, doesn't matter). PM me!!! thanks
------------------ 1986 Silver 5 speed Fiero 3.4 DOHC Bored .30, Fully balanced and blueprinted 13.93@101mph as it is on the street. FOR SALE - MAKE OFFER! ... ... ! 355cid 400hp/tq N/A SBC, 4 bolt main Nitrous Oxide: 1st stage - 125shot direct port. 2nd stage - 75shot plate. 87 GT, Cryo Treated 5-speed Getrag, Gr8grip LSD, Spec Stage 3 clutch.
IP: Logged
10:15 PM
merlot566jka Member
Posts: 676 From: Norman, Oklahoma Registered: Jun 2007
interested in teh northstar kit, im a service advisor at a cadillac dealership in OK, i dont need the engine or wiring unless its different in some way. pm me if your looking to get rid of the kit
IP: Logged
11:50 PM
Oct 28th, 2007
Mister Member
Posts: 1975 From: Calgary, Alberta, Canada Registered: Aug 2004
"Getting out of Fieros" is putting it a bit extreme. Lets just say I am making a planned retreat for a while.
To answer some questions the convertible kit is designed for a notchie and comes with everthing needed except the covering material. You will want an upholsterer to do that anyway. all parts, cut templates, and manuals included. Some welding is required. I'll start the auction at $800 (originally sold for $2500).
The Northstar kit has a custom engine cradle with mounts, custom timeing cover to fit the fiero engine bay, complete fieor to Caddy engine harness (plug and play), a Northstar ECM, Caddy Manuals, various odds and ends, and of course the engine. I'm selling the whole thing complete. I also have another Northstar engine long block. The kit will start at $1000 and the extra long block at $200.
As far as odds and ends go let me put it this way..I have EVERYTHING. From main bearing caps to rear view mirrors. Shoot me a wants list and I'll dig what ever I have out.
Trannys, I have Getrags (street and strip) and gobs of parts, 4-speeds, at least one 3-speed auto (probably a builder), a 4T60(needs rebuilding) with the right axles to drop right into your Fiero, no isuzus.
I have a 1990 Grand Prix Turbo one of about 2700 made. The turbo 3.1 is a GREAT Fiero Swap. I'll be posting that car for sale. It runs, but rough. The head gasket is blown.
Notchie Sail panels, yes, but I am not sure which ones (ie glass or plastic and with which logos, I'll let you know). Shift cables, yes. I assume you mean Getrag? $40 plus shipping. And I need to find them so I hope you can wait a few days.
IP: Logged
09:57 AM
flames4me Member
Posts: 915 From: Woodbury MN / Hammond WI Registered: Jun 2005
Trannys, I have Getrags (street and strip) and gobs of parts, 4-speeds, at least one 3-speed auto (probably a builder), a 4T60(needs rebuilding) with the right axles to drop right into your Fiero, no isuzus.
what makes your strip getrag a racing tranny? definatly interested in it. thanks
IP: Logged
10:02 AM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
what makes your strip getrag a racing tranny? definatly interested in it. thanks
Complete set of straight cut Webster Gears, custom billet detent, full set of dogs, and an LSD. This is perfect of NASA or other racing applications. I don't recommend it for the street. I have one fully built in the box ready to go. Cost $7500 to build but I'll sell it for $3000 to the first taker. I'll even throw in a racing clutch.
IP: Logged
10:11 AM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
Complete set of straight cut Webster Gears, custom billet detent, full set of dogs, and an LSD. This is perfect of NASA or other racing applications. I don't recommend it for the street. I have one fully built in the box ready to go. Cost $7500 to build but I'll sell it for $3000 to the first taker. I'll even throw in a racing clutch.
damn it, why did you have to write that responce... PM me, I would like pics and more info. thanks
edit: I'm interested in buying it.
[This message has been edited by flames4me (edited 10-28-2007).]
you got any 5 speed shift cables? and notchie sailpanels in decent shape?
I have a great set of sail panels that just need a spray job with a rattle can, $20 plus shipping. I have a set of 5-speed Getrag cables "somewhere", I need to dig them out to be sure. I'll let you know.
IP: Logged
03:51 PM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
do you have any stock 5speeds and price shipped to 60527? thanks chris
Yes, I have a couple of stock 5-speeds. I'll get some details for you and some shipping quotes.
quote
Originally posted by flames4me:
did you forget about me? I'll pm you about the tranny instead, lol
No, I have been busy all day with pulling stuff out of the garage and getting pics. Here is a picture of the racing Getrag.
Notice the case detent is a thick chunk of aluminum instead of the stock steel plate. I have to look up the gear ratios but I'm sure they are pretty low. The LSD is a Saed Detroit Locker (not made any more, the last one I had I sold for $1000 to a NASA race car driver) This was designed to bolt up to an engine running 8000 rpm around a race track. Crated up and ready to go.
Gears are:
1st 2.43 2nd 1.82 3rd 1.47 4th 1.18 5th 1.04
Final 3.94
I have extra gear sets and can sell you whatever gear ratios you want if you want to reconfigure it for different style of racing.
[This message has been edited by Toddster (edited 10-28-2007).]
any interest in selling the northstar kit out-right? im not interested in competeing to buy things and would like to buy it and pick it up without having to battle on ebay.
IP: Logged
07:58 PM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
any interest in selling the northstar kit out-right? im not interested in competeing to buy things and would like to buy it and pick it up without having to battle on ebay.
$2500 and the whole magilla is yours. You would spend that on the engine alone. 80,000 miles on it
IP: Logged
10:33 PM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
do you have any stock 5speeds and price shipped to 60527? thanks chris
Here is one, Note the arrow. It has axle stabilizers as well. Used but working fine. $350 plus shipping (which I will have to get back to you on) Let me know if you're still interested.
Interested in your 4t60 what is wrong with it that it will need a rebuild?
With the convertable kit is it a pnumatic automatic kit like the one that fiero john used to have or is it a fully manual kit. do you have a pic of what it will look like assebled.
I am in atascadero so the drive from me to you is short! so what kind of toys are you looking to sell i have been an avid collector of fiero toys for 15 years and am still looking for some ones Let me know if you have any and we can work a deal!!!
IP: Logged
12:31 AM
Toddster Member
Posts: 20871 From: Roswell, Georgia Registered: May 2001
Interested in your 4t60 what is wrong with it that it will need a rebuild?
With the convertable kit is it a pnumatic automatic kit like the one that fiero john used to have or is it a fully manual kit. do you have a pic of what it will look like assebled.
I am in atascadero so the drive from me to you is short! so what kind of toys are you looking to sell i have been an avid collector of fiero toys for 15 years and am still looking for some ones Let me know if you have any and we can work a deal!!!
The 4T60 is slipping. I have already Fiero-ized it so the brakets, vacuum actuator, cables, mounts, speedo gears, etc have all be modified as necessary. All you need is a vacuum source and to wire up a tcc and drop it in. It comes with the axles (new) which were like $125 by themselves. I'll sell the whole thing for $150.
I have some toys, a plastic model in a box, a matchbox fiero (yellow), and steel model of a 85 GT. I think I have one or two more but I have to dig it all out. A lot of stuff is still buried in the garage.
The convertible top is on eBay at the moment. You can have a look with the link up top. I will scan in a finished image for posting here later tonight.
IP: Logged
10:37 AM
FieroAngel Member
Posts: 2094 From: S. Charleston WV Registered: Apr 2004
... 
... 
!
PM me, I would like pics and more info. thanks
