1986 Fiero Gt Fastback.



-91k On the body
-4-Speed Transmission
-Sunroof/moonroof
-80's model corvette seats. (Warn) no rips
-Ect..

The pictures you see above (Before and after) are picture that were
taken less than 24 hrs apart from each other. So with that said, that means
i work pretty fast. So just tell me what you need!

.....................................................................................................................

PARTS THAT HAVE BEEN SOLD:

1- Side Scoops
2- Keeping the full Bilstein suspension system.
3- Power mirrors, harness, and power mirror switches.
4- Wood Grain Trim

[This message has been edited by Fiero Reagan (edited 08-24-2010).]

Here's what I need. There are two bolts that attach the plate the front engine mount screws to.The plate attaches to the timing cover. I have no idea how I lost one of them (vibration most likely) but there it is.

I NEED THOSE BOLTS! If you still have them or need more info about what I'm referring to, please PM me. Thanks!

If possible, i'd like to sell the motor fully together.

I need two small items:

1. Trunk lock cylinder and key. Key broke off in mine.

2. Universal joint (w/ no play) between the steering column and the rack-n-pinion.

Please PM me back if you have w/ prices and shipping to 27958.

Thanks.

I'm looking for the two brackets that hold up the coolant pipe under the driver's door, mine have rusted away.

okay, ill get it on the lift and see if they are there.

What about the seats, what's the name brand on them?

Nevermind I answered my own question. I missed it on the first post.

Does it bolt to the original attatching points on the spaceframe?

[This message has been edited by Daredevil05 (edited 08-18-2010).]

they are 80's model corvette seats.
They are in great condition just need to be repainted with leather paint.
No rips or anything.

Are they lumbar supported seats? Is everything there like no missing handles or anything of that sort.

Just take some very good pics, alot of pics from all angles including the bottom. Pm me the pics along with what you're willig to get for the seats.

I am also
looking for the rear driver and passenger turn signal with the round moulding, no cracks please. Just Pm the price.

Dave

[This message has been edited by Daredevil05 (edited 08-18-2010).]

alright, hold on

What condition are the tail lights in and how much shipped to KY?

Also does it have power mirrors? I need the power mirror switch and the mirrors.

~Tyler

pm'd

quote Originally posted by Fiero Reagan: If possible, i'd like to sell the motor fully together.

Well, if you don't, keep me in mind. I'd prefer not to have to go through a U-Pull safari if I don't have to.

Thanks anyway.

How much for the complete "fastback" setup (panels, tail lights, GT windows, misc bolts and brackets)?

------------------

1995 Pontiac Firebird - 3.4 V6 5-Speed (Engine outta commission awaiting for replacement 3.4), 93-97 to 98-02 Trans Am body conversion My Firebird's Cardomain Page
1988 Pontiac Fiero - 2.5 I4 5-Speed My Fiero's Cardomain Page
1995 Chevrolet Camaro - 3.4 V6 5-Speed, engine donor for my Firebird. Whole car or parts for sale so PM me for details.

pm'd

Edit: Disregard.

[This message has been edited by ConvictedRedneck (edited 08-19-2010).]

What was wrong with the car? Looked like it was in good shape to me.

quote Originally posted by Jefrysuko: What was wrong with the car? Looked like it was in good shape to me.

Ditto

the interior was in crap condition lol.

And just wasn't worth trying to re-sell.

Need the third brake light cover for the interior/headliner area. Does it have one? If so how much $ shipped to 44256?

yes it has one.

$20 shipped.

quote Originally posted by Fiero Reagan: And just wasn't worth trying to re-sell.

Is it worth selling the chassis when you are done? Hopefully you didn't take the roof panel off yet.

PM'ed about the front round marker light(s).

Already took the roof panel off.

Sorry...

Bump

How about the (2) manifolds and the y pipe? Shipping to ATL, GA.

You wouldn't happen to have the power locks connector available? I need the connector with about 8 inches of wire.

Does it have good sunvisors? Mine look pitiful! How much shipped to 61301?

it didn't have a headliner, visors ect.
And it had manual locks..

how much for the rear quarter panels?? shipped to 53402

they are in crap condition...

Full gauge pod with gauges, EGR valve, Y pipe heat shielding shipped to 66762?

quote Originally posted by Fiero Reagan: they are in crap condition...

how bad is crap condition can i get pics?

Does the car have manual or auto windows? If auto, I need the track and motors for both sides. Let me know to 28697 zip. Thanks!

PM sent for:
- Driver side front turn signal lens
- Front marker lenses with the piece of black trim attached (both sides)
- air intake hose - the piece that goes between air cleaner and throttle body (mine is cracked)
- Rubber gasket that goes around the lip of the trunk cargo area, if not torn.
Shipped to 95631

I need a trunk release switch and a oil filler cap. How much shipped to 55092?

quote Originally posted by Foxy Fiero13: how bad is crap condition can i get pics?

in other words, if i were to try and take them off, they would chip off.

quote Originally posted by minuteman3282: Does the car have manual or auto windows? If auto, I need the track and motors for both sides. Let me know to 28697 zip. Thanks!

Yes, it has auto windows and i will pm' you as soon as i check and see if they are any good.

quote Originally posted by Fiero STS: I need a trunk release switch and a oil filler cap. How much shipped to 55092?

Trunk release switch that goes beside the speedo? and the oil cap is free lol.
but just send me $10 for the 2 items. And that $15 will include the shipping.
so....$15 shipped.