There are probably plenty more people who are interested (myself included), just not necessarily jumping on the list at this point. Especially as pokey has said he is going to make these happen.. period, not "I need this many people to sign up".
Rich
IP: Logged
08:24 AM
FieroFanatic13 Member
Posts: 3521 From: Big Rapids, MI, USA Registered: Jul 2006
Were stuck in the mud man. Waiting for time on the machine. I don't want to move to another company because these guys all work as a team and have proven results that I have seen. I urgently want to have them done but I am practicing patience. I just don't want to risk quality for time. It kills me to wait. I will be panelless for Westfest and Sears Point classic races but The California Coast Run should be a winner. Hoping for paint and panels by then. Maybe even get my seats done too!
Of course after the first few come out I may decide to modify the molds slightly because I want them to come out exactly OEM. Total time for this project could realistically be up to 6 months from start to finish. I never would have thought things take so long but now I know. If it were easy everybody would be doing it.
Fortunately for me I was an observer for the last round with Lori. Pokey has been great. He understands what many people went through and has asked for nothing up front. He has also kept us in the loop with the progress. Makes you feel like you are part of the development.
I have been watching this for a LONG time. I was real close to putting money down on a set. Face it, he HAS screwed you all over and you all need to do something about it! I know I would.
Here is a company in Florida 1-877-661-7047 www.usacreditrecovery.com that my dad uses when he has bad debt to collect. They ARE very good at it too. If you all get together the rate drops from and if you all do get together as one large group they have attorneys in Alabama that WILL go after him and Ed Parks. I would say that since he was doing this with Ed Parks money (at the onset) they are both equally liable . Ed knew about it even tho it breaks his policy of employees working on the side with Fiero stuff. Ed should have done something about this along time ago. He has taken your money and you will never see it again. If you don't do something about it. I will never do business with Ed, AKA The Fiero Factory ever again!!!!
IP: Logged
12:34 PM
Robert 2 Member
Posts: 2401 From: St Hubert Quebec Canada Registered: Jan 2006
A little correction It is Mis Lori who picked the money from peoples Not pokeyfiero . She's the one that work at Fiero Factory . And i'm one who got screwed. Maybe you didn't start from the beginning .
I have purchased products from Fiero Factory over the years. They/Ed have always been great. Any problem parts were quickly exchanged. Ed and Lori are two different people. Ed owns Fiero Factory. Lori works there. I'd see no reason to go after Ed since this project was never endorsed by him, or the Fiero Factory. This was a project Lori took on, and was not able to complete. Your beef is with her, not Fiero Factory. Ed Parks has always been a standup guy.
quote
Originally posted by Anne:
I have been watching this for a LONG time. I was real close to putting money down on a set. Face it, he HAS screwed you all over and you all need to do something about it! I know I would.
Here is a company in Florida 1-877-661-7047 www.usacreditrecovery.com that my dad uses when he has bad debt to collect. They ARE very good at it too. If you all get together the rate drops from and if you all do get together as one large group they have attorneys in Alabama that WILL go after him and Ed Parks. I would say that since he was doing this with Ed Parks money (at the onset) they are both equally liable . Ed knew about it even tho it breaks his policy of employees working on the side with Fiero stuff. Ed should have done something about this along time ago. He has taken your money and you will never see it again. If you don't do something about it. I will never do business with Ed, AKA The Fiero Factory ever again!!!!
IP: Logged
03:07 PM
FieroFanatic13 Member
Posts: 3521 From: Big Rapids, MI, USA Registered: Jul 2006
I have purchased products from Fiero Factory over the years. They/Ed have always been great. Any problem parts were quickly exchanged. Ed and Lori are two different people. Ed owns Fiero Factory. Lori works there. I'd see no reason to go after Ed since this project was never endorsed by him, or the Fiero Factory. This was a project Lori took on, and was not able to complete. Your beef is with her, not Fiero Factory. Ed Parks has always been a standup guy.
x 2...
IP: Logged
04:03 PM
PFF
System Bot
DeLorean00 Member
Posts: 4251 From: Sacramento, CA / Reno, NV Registered: Aug 2005
I have purchased products from Fiero Factory over the years. They/Ed have always been great. Any problem parts were quickly exchanged. Ed and Lori are two different people. Ed owns Fiero Factory. Lori works there. I'd see no reason to go after Ed since this project was never endorsed by him, or the Fiero Factory. This was a project Lori took on, and was not able to complete. Your beef is with her, not Fiero Factory. Ed Parks has always been a standup guy.
x3
And lets just re-state again, pokeyfiero had never asked or taken anyones money. Hes funding this all on his own, and only will let people pay once the project is compete. He is a very honest guy.
[This message has been edited by DeLorean00 (edited 05-23-2008).]
A little correction It is Mis Lori who picked the money from peoples Not pokeyfiero . She's the one that work at Fiero Factory . And i'm one who got screwed. Maybe you didn't start from the beginning .
I have purchased products from Fiero Factory over the years. They/Ed have always been great. Any problem parts were quickly exchanged. Ed and Lori are two different people. Ed owns Fiero Factory. Lori works there. I'd see no reason to go after Ed since this project was never endorsed by him, or the Fiero Factory. This was a project Lori took on, and was not able to complete. Your beef is with her, not Fiero Factory. Ed Parks has always been a standup guy.
And lets just re-state again, pokeyfiero had never asked or taken anyones money. Hes funding this all on his own, and only will let people pay once the project is compete. He is a very honest guy.
I never said it was Pokeyfiero, read your PM's
IP: Logged
08:19 PM
Dennis LaGrua Member
Posts: 15526 From: Hillsborough, NJ U.S.A. Registered: May 2000
I don't know what the story is here but until someone comes out with the product and I see it, I won't promise to buy anything. As for my friend Edwin Parks, I've always known him to be a man of honesty and integrity. As far as I know he had absolutley nothing to do with the quarter window debacle.
------------------ 87GT - with 3800SC Series III engine, 4T65eHD 87GT - 3.4L Turbocharged engine, modified TH125H " I'M ON THE LOOSE WITHOUT THE JUICE "
IP: Logged
10:59 PM
Raydar Member
Posts: 40962 From: Carrollton GA. Out in the... country. Registered: Oct 1999
I have purchased products from Fiero Factory over the years. They/Ed have always been great. Any problem parts were quickly exchanged. Ed and Lori are two different people. Ed owns Fiero Factory. Lori works there. I'd see no reason to go after Ed since this project was never endorsed by him, or the Fiero Factory. This was a project Lori took on, and was not able to complete. Your beef is with her, not Fiero Factory. Ed Parks has always been a standup guy.
Anne It is people like you that cause the confussion. If you can't read something and understand what you read, then don't comment on what you don't understand
IP: Logged
07:03 PM
fierogt28 Member
Posts: 2960 From: New-Brunswick, Canada. Registered: Feb 2005
Anne It is people like you that cause the confussion. If you can't read something and understand what you read, then don't comment on what you don't understand
As for the windows, I'll think about purchasing once it's done and ready to sell. Period.
------------------ fierogt28
88 GT, loaded, 5-speed
IP: Logged
10:29 PM
PFF
System Bot
May 25th, 2008
pokeyfiero Member
Posts: 16203 From: Free America! Registered: Dec 2003
Not me, (DWB, Tinted) I'll take a set, so i'll be #30. I don't even own a GT (yet ) but the Formula I have needs company, and I am sure any GT I get WILL have delaminated broken or missing 1/4 windows.
PWB a second set (Factory)
[This message has been edited by htexans1 (edited 05-25-2008).]
IP: Logged
02:06 PM
May 26th, 2008
ARFiero Member
Posts: 1262 From: Savannah, GA Registered: May 2008
Anne It is people like you that cause the confussion. If you can't read something and understand what you read, then don't comment on what you don't understand
Do you always jump on people like this? I understand!! do you now??
IP: Logged
10:42 PM
Raydar Member
Posts: 40962 From: Carrollton GA. Out in the... country. Registered: Oct 1999
