This is great... its the GT Quater Window that realy gives the GT that "Spaceship -look..." More than any one thing on them... now we can build a car that has a future rather than a good laugh...( all the other after market ones were very Cheesey) Thanks for the decitation....Iam ready....email please or PM when they are ready.
IP: Logged
09:47 PM
Apr 2nd, 2006
California Kid Member
Posts: 9541 From: Metro Detroit Area, Michigan Registered: Jul 2001
OK everyone, we have some of the windows in now in a limited quantity, and they are very nice. We are ready to sell them, This first batch is the factory light green tint. The next batch we will have made will be the custom colors, smoked, red, and blue. I can accept PayPal payments at this address LoriAnn099@aol.com and this is also my email address, if anyone wants to email me about them. The price is $229.00 plus a flat rate of $18 shipping, for a total of $247.00
Lori
IP: Logged
08:10 PM
grsychckn Member
Posts: 645 From: Stafford, VA, USA Registered: May 2004
Have we been able to confirm that these have the correct beveled edge at the bottom of the windows? I can't tell from the pics.... This could be a deal breaker for me.... Please confirm so I can get my Paypal sent
Have we been able to confirm that these have the correct beveled edge at the bottom of the windows? I can't tell from the pics.... This could be a deal breaker for me.... Please confirm so I can get my Paypal sent
If you are referring to the little ridge that runs along the bottom edge of the original factory windows, then I will have to say no, these do not have it. The original windows were cast into a mold that isn't available to us. These windows are molded onto a mold, and it would be next to impossible to add that little ridge having them molded the way we do. and the ridge is not visible once they are installed, most people don't even know that it is there. I can not say these are 100% identical to the factory windows, which was my goal, but I feel we got it to 98%
Lori
IP: Logged
10:56 AM
Mickey_Moose Member
Posts: 7549 From: Edmonton, AB, Canada Registered: May 2001
I dont have the money to buy a set right now even though I would love one, but just have to say great job Lori and thanks for all your hard work for the Fiero Community! Hopefully in the near future I can get a set!
Jason
IP: Logged
12:07 AM
Sep 1st, 2006
Jim Baumann Member
Posts: 159 From: Honolulu, Hi Registered: Oct 1999
I PMed you some time back and was still wondering if these are ready to go. I would DEFINITLY be interested in the original factory tint when you have some in stock.
IP: Logged
09:42 PM
Sep 6th, 2006
wayman Member
Posts: 191 From: port charlotte,FL. 33980 Registered: Jan 2006
As most people know by now, I had to start over with this project because of some disputes that we couldn't resolve with the first person than was making them. I contracted a Plastic Fabricator to make them, and this has been a long process and an expensive one. They are now ready to mold them and have made some "sample" windows and they are great, it is now in the hands of the screen printer, as I have them trying to duplicate the factory graphics, and they seem to think they can. Hopefully it won't be much longer, and anyone that wants to be put on the waiting list, please email me at this address and I will add you to the waiting list, it's easier for me to keep track of the people wanting them this way. FieroSolutions@aol.com
Thank You Lori
[This message has been edited by MsLoriFiero (edited 09-06-2006).]
IP: Logged
08:45 AM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
As most people know by now, I had to start over with this project because of some disputes that we couldn't resolve with the first person than was making them. I contracted a Plastic Fabricator to make them, and this has been a long process and an expensive one. They are now ready to mold them and have made some "sample" windows and they are great, it is now in the hands of the screen printer, as I have them trying to duplicate the factory graphics, and they seem to think they can. Hopefully it won't be much longer, and anyone that wants to be put on the waiting list, please email me at this address and I will add you to the waiting list, it's easier for me to keep track of the people wanting them this way. FieroSolutions@aol.com
Ms. Lori, I have been following your progess as you know, I am excited to have a chance to purchase a set of windows when you are ready. I know you will have great success.
IP: Logged
11:01 PM
PFF
System Bot
Oct 14th, 2006
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Just to keep everyone up to date on these windows. I took the afternoon off on Friday and went to the molding shop to see first hand what was taking so long. They have some windows molded and the graphics are applied, and all I could think is WOW, these were awesome. They are still working on the routing fixture that will trim them all out the same and finish the edges the way they need to be, but once that is done, we will be making windows. I know this has taken way longer than I expected, and I know I upset a couple of people along the way, because I wouldn't settle for less, but I do believe they are real close to accomplishing what I set out to do, and that is to make an exact duplicate window.
I'm still here looking forward to seeing the final product. You are taking the time to make sure these are right rather than some cheep knock off and I'm sure that everyone who buys a set will really appreciate it.
Thanks again. Nolan
IP: Logged
05:46 PM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
are custom graphics are available like 3800sc insted of GT?
andrew
Custom graphics will be available, but will cost $30 extra, and will be applied to the inside of the window as a decal, The GT emblem will be screen printed, it would cost way to much to have a new screen made for every custom logo.
Lori
IP: Logged
05:56 PM
Oct 29th, 2006
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
Every time I think we are going to start production, something else comes up. The print shop ordered new screens so they can print the entire window in one step instead of 2, which takes 2 weeks and the company sent them some that were to big to fit in their machine, so now we are waiting on them to send the correct ones. This has become a waiting game, for all of us. But Please don't give up, I have a lot of time and money invested in this project, so it will happen.
Thank You Lori
IP: Logged
07:27 AM
cliffw Member
Posts: 36857 From: Bandera, Texas, USA Registered: Jun 2003
_2.JPG)
.JPG)
_(3).JPG)
_1.JPG)
.JPG)
_1.JPG)
