Here is the list of people who have reserved skirts:
Fixit, Sprdv42, 1986FieroGT, Fieroscotty and Burna J
edit: I ask everyone to please make the payment per PayPal to timo.penrod@pennet-it.com by Monday the 13th. So that I can get the money to Dietmars bank by the end of the week. Thanks.
That is today guys.
IP: Logged
03:35 PM
Coop9200 Member
Posts: 2076 From: Westchester, NY Registered: Oct 2002
i'd probably be interested in the nose...i miss my old one after i wrecked it...and with a shipping container, 800 (estimate) for the nose is a bit more resonable...
Fixit, Sprdv42, 1986FieroGT, Fieroscotty and Burna J. Your skirts will be delivered this weekend. I need the payments ASAP. Please. I need to pay Dietmar when he delivers the pieces if I can't get the money transfered to his account before hand. PM's & e-mails sent.
[This message has been edited by Fiero1Fan (edited 03-14-2006).]
is shipping still $50 for europe? im in the uk at the moment and might get some scoops and skirts from you at some point.
I received a quote today of @100 € for delivery of the large fascia boxes to the UK or Scandinavia. Small packages of skirts or scoops costs 35€ to the UK or Scandinavia.
Here is the list of people who have reserved skirts and not yet paid:
Sprdv42, fieroscotty
I ordered these per your requests! You not only have not paid but neither have returned emails nor pm's. Gentlemen, I need the payments ASAP. Please contact me.
[This message has been edited by Fiero1Fan (edited 03-16-2006).]
I am hoping to have the shipping prices figured out by the first of next week. The 360 rear fascia is $600. The diffuser $220. That would be $820 + shipping. I'll let you know about the shipping as soon as I have the final quote.
Dietmar called last night and told me he was in an accident on the way here. He isn't hurt and will deliver on Thursday. Friday everything will be in the mail. Sorry about the delay.
IP: Logged
09:21 AM
Unsafe At Any Speed Member
Posts: 2299 From: Cheyenne, WY Registered: Feb 2003
These are the only pix I have. Dietmat says that the piece comes without any vents. I'll ask him for better info. My problem is that I have never seen one.
[This message has been edited by Fiero1Fan (edited 03-19-2006).]
IP: Logged
08:36 PM
Mar 20th, 2006
exoticse Member
Posts: 8654 From: Orlando, Fl Registered: Jun 2003
Definatly very nice-looking mods, I'll be interested in that bumper soon, as i need new breaks first >.< Will definatly be in touch, and i'll keep an eye on here for shipping costs.
[This message has been edited by GoldFiero86SE (edited 03-20-2006).]
IP: Logged
12:19 AM
ICouldaBeenAV8 Member
Posts: 692 From: Chatsworth, California; Clearwater, Florida, and Milwaukee, Wisc. Registered: Jun 2003
Payment sent! Now all I have to do is wait....arrrgh.... but for ONCE it's better to live in europe while shopping fiero parts.... €30 shipping is nice
Gave you a + rating
[This message has been edited by Intel (edited 03-21-2006).]
I have a question about the tail lights. It looks like you have to cut up the back of the original tail lights to be able to put them on the car as in the image below. Is there another known method? Don't want to cut up a perfectly good set although this makes it possible to use the original mounting points. I've seen other tail lights that mounts in different ways. After cleaning the garage this morning I found quite a large selection of corvette tail lights ranging from '68 to '03... might just come in handy.
Well new lights is the next thing on my list so I guess I will go visit the junk yards for tail light backs. Then I might just have to give you another order.
Hi Intel, I don't know of another way of doing it. The depth of the light housing causes the need to modify the rear of the original lens. I would think it should be possible to do it with a LED setup. I just haven't looked into that yet.
IP: Logged
04:42 PM
Intel Member
Posts: 752 From: Helsingborg, Sweden Registered: May 2002
I have a question about the tail lights. It looks like you have to cut up the back of the original tail lights to be able to put them on the car as in the image below. Is there another known method? Don't want to cut up a perfectly good set although this makes it possible to use the original mounting points. I've seen other tail lights that mounts in different ways. After cleaning the garage this morning I found quite a large selection of corvette tail lights ranging from '68 to '03... might just come in handy.
Well new lights is the next thing on my list so I guess I will go visit the junk yards for tail light backs. Then I might just have to give you another order.
Just got home from work to find... a pair of Side Scoops!
Fast delivery and great quality! Not the thin flimsy stuff that you get from most ricer-accessory shops. Doesn't seem to require much work either, just a little sanding and finishing.
Yeah!!! Another happy customer.Yes Dietmar does some VERY good work. Be sure to tell your friends and fellow Fiero pals! Thanks for letting me know when they came in.
Well I have some good news for all of you wanting the f355 nose and/or f360 rear fascias. I have worked out the shipping to Tim ( www.fieroparts.com ) in Maine per 20" sea container. In the container I can pack 24 of the large boxes. The only things I now have to work out are the US import taxes and customs fees along with the shipping from Maine to the buyers. I am planning on using Greyhound for the ground shipping. I have heard that they have the best prices. I hope to have everything worked out by the end of next week. Keep your fingers crossed as it looks like we finally have a viable way of doing this.
We do need to fill the container with the 24 boxes. At the moment I have 17 pieces that people have said that they want. That means we need 7 more to fill the container. So everyone who wants these talk with your friends and see if we can get the container filled as soon as possible so we can ship as soon as they are finished being made.
Final prices will be posted next week. Then orders will be taken. Payment will have to be made with the order. Payment per PayPal.
I will be glad to answer any questions.
[This message has been edited by Fiero1Fan (edited 03-31-2006).]
timo if i have not said it enough....thank you...tireless effort to help all those in the fiero community beautify their rides...if i could i would buy you a beer....i just hope my skirts arrive soon...tim..