how about a driver's power window 4-switch assembly (not the cover) for a 2000 grand am se v6?..(sorry not sure of part #)

quote Originally posted by 88White3.4GT: Ok, its in the mail headed your way. Thanks again.

Got it today give us a call at 1-800-676-6321 for us to give you a credit

Just got a bunch of parts to restore my '95 Camaro at a fraction of the price the local dealer charges. Genuine GM. Thank you Monster Parts!

Can you show me a picture of chevy part # 10495802 - just want to make sure its the right pole piece.

Thanks

[This message has been edited by AutoTech (edited 03-21-2008).]

quote Originally posted by AutoTech: Can you show me a picture of chevy part # 10495802 - just want to make sure its the right pole piece. Thanks

http://198.208.187.182/inte...oPartNumber=10495802

heres the picture if the link doesnt work go to acdelco.com and click parts catalog and then view by image and enter the number

DID I GET EVERYONE?

Do you have spark plugs and wires for an 03 Sierra 2500 with the 6.0? I couldn't find them, if so how much shipped to 45246?

thank you

quote Originally posted by Madess: Do you have spark plugs and wires for an 03 Sierra 2500 with the 6.0? I couldn't find them, if so how much shipped to 45246? thank you

Yes I do price shipped to you would be 109.09 (this is for 8 plugs wires shipping handeling and insurance) If you wish to order I do need to know if your ignition coils are round or square as there are 2 different designs on the wires.

Could you verify the price for a set of tail lamp assemblies for a 2006 GTO?

quote Originally posted by TM_Fiero: Could you verify the price for a set of tail lamp assemblies for a 2006 GTO?

price is 140.12 ea plus shipping part# 92149071 for righ 92149072 for left

.

[This message has been edited by JazzMan (edited 04-14-2009).]

quote Originally posted by monsterparts: price is 140.12 ea plus shipping part# 92149071 for righ 92149072 for left

Thanks, parts ordered

quote Originally posted by JazzMan: Price for a 87-88 clutch master cylinder rebuild kit or seal kit? JazzMan

i dont have a rebuild kit or seals available but I can order a new one for 60.32 plus shipping part# 18031014

.

[This message has been edited by JazzMan (edited 04-14-2009).]

quote Originally posted by JazzMan: Is that real OEM GM or the cast aftermarket unit? JazzMan

it is not oem but it is gm's durastop line. So it is like an aftermarket but one thats made by GM so it is like the origional

ok, I will check.

Looking for OEM 1988 Fiero GT V6 Exhaust bolts and studs. Do they still sell them? If so, how much?

quote Originally posted by sjmaye: Looking for OEM 1988 Fiero GT V6 Exhaust bolts and studs. Do they still sell them? If so, how much?

do you need them all including exhaust manifold to head studs?

.

[This message has been edited by JazzMan (edited 04-14-2009).]

quote Originally posted by JazzMan: Ok, can you PM me ordering and payment info? Thanks! JazzMan

pm sent

quote Originally posted by monsterparts: do you need them all including exhaust manifold to head studs?

Yes, I need the mixture of studs and bolts used to hold the exhaust manifolds to the heads . My photos show it came with 6 studs and 6 bolts.

I can get the studs being sold by the FS, but they don't look to be the same. I want the ones the same as what came on it in 1988.

[This message has been edited by sjmaye (edited 04-10-2008).]

Can you get dew wipes for an 88 Fiero Formula?

I believe these are the part numbers:

1985-88 SEALING STRIP, window outer RH 20606220
1985-88 SEALING STRIP, window outer LH 20606221

Thanks,

Frank

I am looking for a waterpump tensioner and belt for a '94 cadillac Northstar 4.6L

http://www.trademotion.com/...2&displayCatalogid=0

The picture that comes up is the wrong one...I want to verify before ordering ?

Mike

Also looking for outer dew wipes for 86 fiero se.
I believe the part numbers were....1985-88 SEALING STRIP, window outer RH 20606220, 1985-88 SEALING STRIP, window outer LH 20606221.
Let me know if you can still locate these and i'll place an order for the pair.

Thanks. Jon.

They only thing GM is still listing is bolts for the manifolds and hardware below will that surfice?

quote Originally posted by sjmaye: Yes, I need the mixture of studs and bolts used to hold the exhaust manifolds to the heads . My photos show it came with 6 studs and 6 bolts. I can get the studs being sold by the FS, but they don't look to be the same. I want the ones the same as what came on it in 1988.

quote Originally posted by monsterparts: price is correct at 33.43 the correct part number for you is 3534733 if you would like to enter directly

The picture that comes up is a different style...I already have the one pictured but I need a '94 specific tensioner and bracket...Any way to tell if its just the wrong pic ?

quote Originally posted by buds: The picture that comes up is a different style...I already have the one pictured but I need a '94 specific tensioner and bracket...Any way to tell if its just the wrong pic ?

i didnt go off the online catalog that is provideded by an aftermarket company i looked it up using my gm catalog under a 94 seville

I need the following all for an 85 firebird S/E:

Part numbers : 10118488; 10118489 - these are the flat filler panels which bolt to the underside of the fenders and the front bumper cover, and the ends of the air dam bolts onto them, for a non-ground effects equipped car

I also need the three piece air dam (attaches to those/core support) to force air into the radiator but dont have a part number. I've seen them on ebay as a kit - center/left/right with hardware so if thats available it would be what I'm looking for. Trying to avoid paying the vultures on the bay if I can do it though and keep shipping costs down going through one-stop for new parts, just as long as its not cost prohibitive

do you sell longer wheel studs (excuse the Australian vernacular) bolts,
suitable for making it possible to bolt on rotors and the wheel onto modified front 84-87 hubs with the rotors machined off ?
Going to be a brake upgrade.

Rick

How about the pinch bolt and nut for the rear lower ball joint. ('84-'87) These are supposed to be replaced every time you remove them because of the deformed locknut.

------------------

'85GT Indy clone 4.9 4T60E
'78 Toyota longbed, parts runner
'89 Bonneville daily driver
'87 30' Kit Classic TT, living in it.

quote Originally posted by KennyC: I need the following all for an 85 firebird S/E: Part numbers : 10118488; 10118489 - these are the flat filler panels which bolt to the underside of the fenders and the front bumper cover, and the ends of the air dam bolts onto them, for a non-ground effects equipped car I also need the three piece air dam (attaches to those/core support) to force air into the radiator but dont have a part number. I've seen them on ebay as a kit - center/left/right with hardware so if thats available it would be what I'm looking for. Trying to avoid paying the vultures on the bay if I can do it though and keep shipping costs down going through one-stop for new parts, just as long as its not cost prohibitive

unfortunatly non of these items are available to me any longer