quote Originally posted by 87GT_97114: How about the pinch bolt and nut for the rear lower ball joint. ('84-'87) These are supposed to be replaced every time you remove them because of the deformed locknut.

i can get these part number is 11515769 price of 2.45 ea + ship

I need a dash pad for an '02 Buick LaSabre, gray without the HUD.
PM sent.....

quote Originally posted by Cooter: I need a dash pad for an '02 Buick LaSabre, gray without the HUD. PM sent.....

culd i get the vin number i show 2 different grays in that year

Ordered a few parts for my bonneville from Monster Parts. Great prices, and you can call and actually speak to a person... which is rare these days!

quote Originally posted by monsterparts: culd i get the vin number i show 2 different grays in that year

1g4hp54k8tu258166
Thanks!

How much for a front passenger side wheel bearing for a 1998 Oldsmobile Delta 88 LSS?

quote Originally posted by Fiero Owner: How much for a front passenger side wheel bearing for a 1998 Oldsmobile Delta 88 LSS?

149.49 plus ship part# 7470511

quote Originally posted by monsterparts: could you double check this vin it comes up invalid and if i run the last 8 it comes up as a cadillac

Paw-paw can't read (or I can't hear)- try this one:
1g4hp54k82u258166

22510798 its an oldsmobile header panel nameplate emblem On your website it said a bit under $7 ea, was wondering if you could still get them, how much the new accurate price was because of the disclaimer on the homepage, and how many you might be able to get?

Started to order some parts from your site but when it was time to pay, Paypal was not an option. Would like to get the following parts if they are available:

OEM Catalog
S/STR P 1 $43.17 $25.72 $0.00 $25.72
OEM Catalog
S/STR P 1 $50.61 $30.16 $0.00 $30.16
OEM Catalog
S/STR 1 $57.47 $34.25 $0.00 $34.25
OEM Catalog
S/STRP 1 $60.92 $36.30 $0.00 $36.30

Is Paypal an option to be able to pay for these parts?

Long shot here...

I need a slave cylinder for an 86 2.8 V6 4-Spd Fiero

Can you get front & back side marker lights for 86 Fiero GT left side? I don't have any part #s for them, thankyou.

Mark

Please quote me for a Duke 88, need pricing on a force ballancer / oil pump. Thank you.

quote Originally posted by flimbob: Started to order some parts from your site but when it was time to pay, Paypal was not an option. Would like to get the following parts if they are available: OEM Catalog S/STR P 1 $43.17 $25.72 $0.00 $25.72 OEM Catalog S/STR P 1 $50.61 $30.16 $0.00 $30.16 OEM Catalog S/STR 1 $57.47 $34.25 $0.00 $34.25 OEM Catalog S/STRP 1 $60.92 $36.30 $0.00 $36.30 Is Paypal an option to be able to pay for these parts?

unfortunatly these are not available

quote Originally posted by KennyC: 22510798 its an oldsmobile header panel nameplate emblem On your website it said a bit under $7 ea, was wondering if you could still get them, how much the new accurate price was because of the disclaimer on the homepage, and how many you might be able to get?

i can still get them and yes this price is accurate at 6.78 ea

quote Originally posted by monsterparts: i can only get you the oil pump at 114.36 plus shipping part# 10146802

Thank you for taking the time to quote me, yeah that force ballancer is tough to find, no worries, I have an alternate source.

anyone need anything is is everyone all good?

Hey, need to check a price on 12584727. Can you shoot me an email to bryan_es@yahoo.com?

i dont know the part number but its the shift cable mount bracket that goes on the 5 speed manual tranny i think it came out of a 84 fiero how do i find it on your site with no part number?

heres what it looks like:


thanks

quote Originally posted by DEMONCHILD: i dont know the part number but its the shift cable mount bracket that goes on the 5 speed manual tranny i think it came out of a 84 fiero how do i find it on your site with no part number? heres what it looks like: thanks

10038294 85 5 speed
84 year model had only a 4 speed and a different looking bracket.

quote Originally posted by caddyrocket: Hey, need to check a price on 12584727. Can you shoot me an email to bryan_es@yahoo.com?

email sent

Hi....I'm looking for AC-Delco p/n PT111. (two-wire pigtail connector..goes to coolant sensor on cyl head / Fiero V6)

Also...just curious here as to whether you sell the "driveline absorber" for pre-88 Fiero GT's?
As far as I know only the Fierostore sells this mini shock absorber.

Lastly, are you able to get the Fiero "under the intake" vacuuum lines? (for the V6)

Thanks, Kit

AC Delco hub assy 7470014. Would like 2 shipped to 48371. How much?
Thanks

quote Originally posted by carbonfiber_kid: AC Delco hub assy 7470014. Would like 2 shipped to 48371. How much? Thanks

2 of this hub shipped and insured would be 223.80

How much for 88 coupe front calipers and rotors? Also the mounting hardware for struts/shocks for the same 88 coupe? Would not need shipping quote, as I could pick them up in person and would prefer to do so...

Thanks,

Brian

[This message has been edited by Xerces_Blackthorne (edited 08-06-2008).]

One of my cv joint bearings fell apart on my 88 Fiero GT 5spd, and I lost a few of the pin bearings. Any chance that I could order just the pins?

How much for a driver's side rear door window regulator on a 2003 Buick Rendevous? Power windows.


Steve

How much for a 1991 Olds Toronado blower motor module?

PM sent.

monsterparts, can you ship internationally (England)? If you can, then I will mention you to our small band of merry men that struggle to get any Fiero parts over here.

Cheers
PK

How much for this ? (PM me if you want)

GM Part #: 25312179
GM Part #: 25176708
ACDelco #: AFS74



PLEASE CONFIRM THAT THIS IS A DIRECT PLUG-N-PLAY REPLACEMENT FOR THE STOCK 2 WIRE SENSOR.

[This message has been edited by PaulJK (edited 10-02-2008).]

I havent seen him post in awhile, he still kicking?

quote Originally posted by PaulJK: How much for this ? (PM me if you want) GM Part #: 25312179 GM Part #: 25176708 ACDelco #: AFS74 what is the exact application? the part numbers here are all for different applications email me at ptrageser@patriotofboyertown.com PLEASE CONFIRM THAT THIS IS A DIRECT PLUG-N-PLAY REPLACEMENT FOR THE STOCK 2 WIRE SENSOR.