4cyl fuel pump. ? It's more expensive on the site than anywhere else I checked.

i JUST CHECKED THE SITE AND THERE IS AN ERROR IN THE CATALOG CORRECT PRICE IS 43.40 PART# 25168719

quote Originally posted by CoryFiero: 4cyl fuel pump. ? It's more expensive on the site than anywhere else I checked.

quote Originally posted by monsterparts: Do you need a camshaft or cam bearings? I Just want to confirm before I work up a quote

Got the cam and camshaft bearings now. I still need all the gaskets, seals, main and rod bearings, timing chain, rings, and temp sensor.

You do have a great price on the cam on your site but I found a High lift one (re-ground) for a little less from Delta Camshafts. Found cam bearings on e-bay brand new for 16.50 total.

Edit: Just wanted to sat the the cam is a better deal at monsterpartsonline.com. It comes with lifters ect and you are half the price of anyone else.

[This message has been edited by Fieroseverywhere (edited 05-03-2007).]

quote Originally posted by monsterparts: i JUST CHECKED THE SITE AND THERE IS AN ERROR IN THE CATALOG CORRECT PRICE IS 43.40 PART# 25168719

Thanks I bought it for $49 yesterday. But you are a really good businessman for looking into it and updating it.

Cory

quote Originally posted by monsterparts: Hey guys. A few of you have purchased off of me before....

PM sent

MAIN BEARINGS 35.30 EA
ROD BEARINGS 19.55 EA
RINGS 27.03 EA
INTAKE GASKET SET 58.35
FRONT COVER GASKET 6.03
HEAD GASKETS 25.36 EA
OIL PAN GASKET 17.14 NEEDS SEAL ALSO 1.00
REAR MAIN 18.20
CHAIN 48.15
SENSOR 13.57
I KNOW GM MAIN ROD AND RINGS ARE EXPENSIVE. GM DOES NOT OFFER COMPLETE ENGINE GASKET KITS I BELIEVE I QUOTD EVERYTHING YOU WILL NEED THOUGH

quote Originally posted by Fieroseverywhere: Got the cam and camshaft bearings now. I still need all the gaskets, seals, main and rod bearings, timing chain, rings, and temp sensor. You do have a great price on the cam on your site but I found a High lift one (re-ground) for a little less from Delta Camshafts. Found cam bearings on e-bay brand new for 16.50 total. Edit: Just wanted to sat the the cam is a better deal at monsterpartsonline.com. It comes with lifters ect and you are half the price of anyone else.

quote Originally posted by monsterparts: MAIN BEARINGS 35.30 EA ROD BEARINGS 19.55 EA RINGS 27.03 EA INTAKE GASKET SET 58.35 FRONT COVER GASKET 6.03 HEAD GASKETS 25.36 EA OIL PAN GASKET 17.14 NEEDS SEAL ALSO 1.00 REAR MAIN 18.20 CHAIN 48.15 SENSOR 13.57 I KNOW GM MAIN ROD AND RINGS ARE EXPENSIVE. GM DOES NOT OFFER COMPLETE ENGINE GASKET KITS I BELIEVE I QUOTD EVERYTHING YOU WILL NEED THOUGH

Ouch. That hurts. I had a buddy at the machine shop look into it also and he quoted me 350 for the gaskets and bearings. I will still need the timing chain, sensor and an intake valve though. I will be picking them up from your website in the next week or so. Thank you for looking for me. I really appreciate it. I just cant do 800 dollars for all of it. Sorry.

AFTERMARKET BEARINGS AND RINGS ARE ALOT CHEAPER BUT USUALLY THE GM GASKETS ARE CHEAPER. YOU MAY WANT TO FIND OUT HOW MUCH OF THE 350 WAS GASKETS AND WHAT GASKETS AND COMPARE

quote Originally posted by Fieroseverywhere: Ouch. That hurts. I had a buddy at the machine shop look into it also and he quoted me 350 for the gaskets and bearings. I will still need the timing chain, sensor and an intake valve though. I will be picking them up from your website in the next week or so. Thank you for looking for me. I really appreciate it. I just cant do 800 dollars for all of it. Sorry.

We'll do. thanks for the tip. You have my business anyways because of your excellent customer service. thanks again.

Thank you i appreciate that

quote Originally posted by Fieroseverywhere: We'll do. thanks for the tip. You have my business anyways because of your excellent customer service. thanks again.

DID YOU FIND OUT BY CHANCE?

quote Originally posted by Fieroseverywhere: We'll do. thanks for the tip. You have my business anyways because of your excellent customer service. thanks again.

do you have any A/C replacement parts?? compressor, receiver/dryers, seals, oriface tube, and or r 134a conversion kit?

THANKS!


-Mark

EDIT: to add Accumulator, Air-Vac vacuum pump, A/C manifold gauge set .

[This message has been edited by 88White3.4GT (edited 05-08-2007).]

yes i can
on your 3.4 what is the belt setup from, so i can quote you the correct compressor. also i can get you the air-vac pump and the manifold set but it is not something i am a distributor for, so my prices will not be the best. You can pick them up alot cheaper from either harbor frieght or jc whitney. I am a distributor for FJC so the retro kit i can get you a good price on. Or as far as a guage set i can get you pounder cans of 134 and a low side guage through FJC. Let me know and I will work up a quote for you.
Patrick

quote Originally posted by 88White3.4GT: do you have any A/C replacement parts?? compressor, receiver/dryers, seals, oriface tube, and or r 134a conversion kit? THANKS! -Mark EDIT: to add Accumulator, Air-Vac vacuum pump, A/C manifold gauge set .

How much is P/N 88958721 & 17803229 from GM performance?

------------------
yellow 88 GT, not stock
white 88 notchie, 4 banger

price on 88958721 is 202
price on 17803229 is 530.25

quote Originally posted by ccfiero350: How much is P/N 88958721 & 17803229 from GM performance?

How about P# 12590814 from GM Performance, can't find it anywere.

------------------
yellow 88 GT, not stock
white 88 notchie, 4 banger

that number does not come up as a valid number what is it?

quote Originally posted by ccfiero350: How about P# 12590814 from GM Performance, can't find it anywere.

It's part description is listed as "adapter-throttle body" and it adapts 03-05 Cavalier and Sunfire cable throttle bodies to an eaton super charger for 2.2L Ecotecs. It's part of a bolt on supercharger kit (P#1780003) for the same. I believe it's made by Katech.

Thanks,

------------------
yellow 88 GT, not stock
white 88 notchie, 4 banger

Bought a TON of parts through Monsterparts last week. Was a great experience and saved me a lot of money, very happy with the service and shipping speed. Thanks!! Recommended to everyone!

I just checked into this and that is the correct part number but they do not sell it separatly

quote Originally posted by ccfiero350: It's part description is listed as "adapter-throttle body" and it adapts 03-05 Cavalier and Sunfire cable throttle bodies to an eaton super charger for 2.2L Ecotecs. It's part of a bolt on supercharger kit (P#1780003) for the same. I believe it's made by Katech. Thanks,

thank you

quote Originally posted by CTFieroGT87: Bought a TON of parts through Monsterparts last week. Was a great experience and saved me a lot of money, very happy with the service and shipping speed. Thanks!! Recommended to everyone!

sent a pm to you. help please!

pm sent

quote Originally posted by shawnkfl: you were so quick on that one, i sent you another one. thank you!

did u get my email about this

quote Originally posted by ccfiero350: How about P# 12590814 from GM Performance, can't find it anywere.

I tried to order a clutch line for my GT. Do you not have it? 88GT6cly.

Cory

------------------
88 Coupe 4cyl 5 speed (Carl)
88 GT built 3.2 5 speed (Bianca)

Someone told me that my engine was taking up my trunk space.. I quickly responded with "NO, my trunk is taking up my engine space" hahaha.

quote Originally posted by CoryFiero: I tried to order a clutch line for my GT. Do you not have it? 88GT6cly. Cory

PM'ed ya monsterparts

Is $82.57 the correct price for an 88 V6 fuel pump?
(Of course, I've heard rumors that it may be different from some of the earlier years. Maybe the same as 87?)

[This message has been edited by Raydar (edited 05-25-2007).]

For some reason the caalog keeps listing the wrong fuel pumps
the pump you need goes for 68.11 p#25163468
along with strainer 12.59 p#25121637

quote Originally posted by Raydar: Is $82.57 the correct price for an 88 V6 fuel pump? (Of course, I've heard rumors that it may be different from some of the earlier years. Maybe the same as 87?)

Cool!
Thank you.

no prob

quote Originally posted by Raydar: Cool! Thank you.

email sent buddy

quote Originally posted by Matthew_Fiero: PM'ed ya monsterparts

Easy to deal with Pat on the phone. Thanks for the time, looking forward to getting my parts.

------------------
Wudman - www.fierodriver.com
www.StLouisMojo.Com - RadioFreeMojo.Com

Can't get your site to show anything older than 1990, I click , classics, but it just reloadds the same page??????

The company who provides the catalog is rebuilding it today, thats why it is not working fully right now but it will be up soon

quote Originally posted by 2.5: Can't get your site to show anything older than 1990, I click , classics, but it just reloadds the same page??????

I need cv joints for an 86 th125 2.8 and dew wipes for my 88t-top GT. I wasn't successful on your web site search.

the cv joints are dicontinued but i can still get them
price 105.06 ea if you need the tripot joints i will need a little more info.
The sealing strips go for 64.62 for the set. Currently the ps is on backorder. I have a waiting list strarted, would you like on it?

quote Originally posted by dratts: I need cv joints for an 86 th125 2.8 and dew wipes for my 88t-top GT. I wasn't successful on your web site search.

I'm having my machinist make a pair of axles out of the th125 axles and a pair of Pontiac 6000 axles. They need to be 4" longer than the stock th125 axles. I have a set of rebuilt 6000 axles but I lost some of the needle bearings in the cv joint of the th125 when I was dissassembling it. Also the th125 cvs had what looked like a thick rusty oil instead of grease, so I don't trust them. Is there a rebuild kit for my th125 cvs?