email sent

quote Originally posted by DaddyFreddy: Monsterparts-greetings. Can you please help me with some GM factory replacement parts: I have an 02 Tahoe z71, last 8 of Vin is 2R233023. I want to replace the brakes and blower motor. Will you please verify the parts and provide a price? The parts I have been given are:18041762-front pad, 18045936-rear pad, 18060214 front rotor, 25757802-rear rotor, and 19153680-rear ac blower motor. Do I need to replace anything else on the brakes to bring them up to factory fresh condition? I am surprised they have held up this well and this long. jshepherd@jaxwhse.com John

get it?

quote Originally posted by monsterparts: email sent

Do you have the bracket to hold the ignition coil and also the correct wire and plug? What about the correct front sway bar bushings. this is all for an 88 GT 5 speed.

SORRY IT TOOK SO LONG TO GET BACK TO YOU HAD TROUBLE LOGGING IN
THE IG COIL BRACKETS ARE NO LONGER VAILABLE
AS FOR THE PLUGS I CAN GET THEM THEY GO FOR 1.47 EA + SHIP
I CAN GET THE SERVICE REPLACEMENT WIRES WHICH ARE BLACK INSTEAD OF RED BUT THEY GO FOR 29.53 + SHIP
THEY SWAY BAR BUSHINGS ARE NOT AVAILABLE ANY LONGER

quote Originally posted by cliffg: Do you have the bracket to hold the ignition coil and also the correct wire and plug? What about the correct front sway bar bushings. this is all for an 88 GT 5 speed.

Are the Fiero arm rests still available from GM? John

UNFORTUNATLY THESE ARE NO LONGER AVAILABLE

quote Originally posted by 3.4Turbo: Are the Fiero arm rests still available from GM? John

I have just bought all new brake lines from Fieros Store. I have also ordered the brake adapter kit that is listed in another tread (11 3/4 upgrade)
I am hoping that you could offer a kit with the calipers and rotors and all the other parts required to complete this conversion. If you can do that at a competitive price, then I'll buy all the parts for this upgrade from you. I'm sure many others would too.

Note that Canadians get stung sending parts up across the border. I just paid an extra $100 for my $500 order from FS. :-(

I GUESS YOU DIDNT GET MY EMAIL BUT HERES THE LOW DOWN. I AM UNABLE TO GET THE ROTORS YOU NEED BUT FOR
4 CALIPERS
8 CAL BOLTS
2 SET PADS
MAST CYL
SHIPPED TO YOU IN CANADA IS 575.00 I WILL MARK AS GIFT WITH NAFTA STATEMENT TO SAVE YOU ALOT ON CUSTOMS
NOW THE CALIPERS HAVE CORES ON THEM WHICH IS INCLUDED IN THE 575.00 PRICE YOU CAN TAKE TO YOUR LOCAL DEALER WITH THE OLD ONES. CORE CHARGES IN THIS PRICE TOTAL 158.00. IT WOULD PROBABLY COST YOU CLOSE TO THE CORE VALUE IN SHIPPING TO RETURN THEM TO ME.

quote Originally posted by Greg-W: I have just bought all new brake lines from Fieros Store. I have also ordered the brake adapter kit that is listed in another tread (11 3/4 upgrade) I am hoping that you could offer a kit with the calipers and rotors and all the other parts required to complete this conversion. If you can do that at a competitive price, then I'll buy all the parts for this upgrade from you. I'm sure many others would too. Note that Canadians get stung sending parts up across the border. I just paid an extra $100 for my $500 order from FS. :-(

I am looking for the feed and return fuel lines for an 88 v-6

THE ONLY ONE I CAN STILL GET IS THE FEED LINE (ONE GOING FROM THE TANK THE THE FUEL FILTER)
PRICE IS 95.00 PLUS 17.10 SHIP HAND AND INSURENCE. ALL THE OTHER LINES ARE EITHER DISCONTINUED OR SERVICE BY BULK COMPONENTS (BULK FUEL HOSE OR FUEL LINE) I CAN SUPPLY THE BULK MATERIALS AS WELL IF YOU LET ME KNOW WHAT YOU NEED (LENGTHS AND SIZES) AS MY COMP DOES NOT TELL ME WHAT THEY ARE. SEND ME AN EMAIL AT PTRAGESER@PATRIOTOFBOYERTOWN.COM IF YOU WOULD LIKE TO ORDER THE AVAILABLE LINE OR ANY OTHER ITEMS

quote Originally posted by cunninghamsean: I am looking for the feed and return fuel lines for an 88 v-6

Thanks for the quick response, but since I can get braided lines for the same price I will go that route.


Sean

Can you give me a status on an order I placed a couple of days ago? The order number is 15696244. Your website says processing... does that mean you are waiting on parts?

YES ONE OF THE ITEMS ON YOUR ORDER IS ON ORDER TO ME I AM JUST WAITING FOR IT TO ARRIVE AND THEN IT WILL SHIP RIGHT OUT TO YOU

quote Originally posted by topcat: Can you give me a status on an order I placed a couple of days ago? The order number is 15696244. Your website says processing... does that mean you are waiting on parts?

Thanks!

quote Originally posted by monsterparts: YES ONE OF THE ITEMS ON YOUR ORDER IS ON ORDER TO ME I AM JUST WAITING FOR IT TO ARRIVE AND THEN IT WILL SHIP RIGHT OUT TO YOU

no prob

quote Originally posted by topcat: Thanks!

Your site let's me order Pontiac part number 20606220 and 20606221 do you really have these in stock and can be ordered?
do you have the drivers side wipes available? I'll try to make a drives side fit a ps door.

Also do you have the part numbers for the sunroof seal and seal tracks?

[This message has been edited by timgray (edited 09-12-2007).]

quote Originally posted by timgray: Your site let's me order Pontiac part number 20606220 and 20606221 do you really have these in stock and can be ordered? do you have the drivers side wipes available? I'll try to make a drives side fit a ps door. Also do you have the part numbers for the sunroof seal and seal tracks?

1986 Fiero GT for the tracks and seal.

I DONT LIST ANY RAILS FOR THE SUNROOF IN THAT YEAR AS IT IS A LIFT OFF ACCORDING TO MY CATALOG. THE WEATHERSTRIP FOR IT IS AVAILABLE AND GOES FOR 60.36 + SHIPPING

quote Originally posted by timgray: 1986 Fiero GT for the tracks and seal.

Looking for the following parts for my 88GT:

-right/passenger side exhaust hanger
-dip stick (V-6)
-right & left front tie rods

Got em?

Tony

exhaust hanger -disco
dip stick - disco
tie rods -
oem gm - 108.80 for two shipped to your door
gm value line - 72.78 for two shipped to your door

quote Originally posted by Maloso: Looking for the following parts for my 88GT: -right/passenger side exhaust hanger -dip stick (V-6) -right & left front tie rods Got em? Tony

DID YOU RECIEVE IT YET?

quote Originally posted by topcat: Thanks!

thank you all for the feedback i have been recieveing

quote Originally posted by monsterparts: DID YOU RECIEVE IT YET?

Yes, it came in Tuesday. Will insall the parts this weekend.

Cheers

cool glad to hear it

quote Originally posted by topcat: Yes, it came in Tuesday. Will insall the parts this weekend. Cheers

I'm looking for a clutch slave cylinder for an 88GT 5spd Fiero, getrag tranny. Also would like the master cylinder, looked on the site but wasn't sure if the slave listed was for the v6 getrag tranny or not.

How much for an A/C compressor, dryer, & expansion tube for an 85GT shipped to 35007 zip code? If you don't mind, please reply via email.

Thanks,

Carroll

Hey monster did you get my PM? Sorry I didn't call, I'll call tomorrow.

yes i did was a little tied up yesterday because of the gm strike

quote Originally posted by CTFieroGT87: Hey monster did you get my PM? Sorry I didn't call, I'll call tomorrow.

Need a 98 4t65e pan gasket.

DO YOU NEED THE ONE WITH 6MM OR 8 MM BOLT HOLES THERE WAS 2 DESIGNS IN THAT YEAR

quote Originally posted by Fieroeddie: Need a 98 4t65e pan gasket.

FIERRO EDDY DID YOU GET MY PM?

did you get my pm

quote Originally posted by Carrolles: How much for an A/C compressor, dryer, & expansion tube for an 85GT shipped to 35007 zip code? If you don't mind, please reply via email. Thanks, Carroll

Can you get both correct GM battery cables with the correct ends so they work right? I have a 1986, 2.5 ,AC, 5spd. I can get the universal ones anywhere.
Thanks
Joe Crawford
Texas

quote Originally posted by monsterparts: DO YOU NEED THE ONE WITH 6MM OR 8 MM BOLT HOLES THERE WAS 2 DESIGNS IN THAT YEAR

I believe it has the 6 MM bolt holes.

Can you get the front and rear brackets that bolt to the F40 6spd G6 transmission that attach the tranyy to the tranny mounts? John

quote Originally posted by josef644: Can you get both correct GM battery cables with the correct ends so they work right? I have a 1986, 2.5 ,AC, 5spd. I can get the universal ones anywhere. Thanks Joe Crawford Texas

i list a possative cable p# 88860072 which goes for 11.91 here is a link to a picture
http://198.208.187.182/inte...lcoPartNumber=4sd35x
and neg cable part# 88860065 which goes for 9.48 link is below
http://198.208.187.182/inte...lcoPartNumber=4SD20X