As far as the turn signals they didnt look into it, and i have no idea either. And I will find out about the price. I will try to negotiate a price of $350 plus shipping, as this is an average i that will be competitive with other bumpers being sold.

Not the greatest work i've done, but it will give you a better idea.

NIce job "86fierofun" that is way better !!! my friend hasnt had the time to photshop. It does give a very good idea of how it will look, I will be talking to the designers hopefully this evening, and discuss price (350) and find out the progress on the other pieces being made

OK good to know. I'm very interested!

JG

bump

will be posting some more pics that show the side skirts and spoiler

[This message has been edited by nightonfire (edited 10-26-2008).]

quote Originally posted by nightonfire: will be posting some more pics that show the side skirts and spoiler

Will be watching!

i wonder if someone could photo chop it onto a fiero with the mad arch kit. That would be interesting to see.

OK kyle should be posting them soon!

sweet

awww s*** we have lotus rebodys now

They should also make some belt-less fenders & door panels to match the nose.

i have some more pics and was wondering if someone would be willing to host them. Please pm me your email thank you very much!

ya knoe! theat nose looks goood bu why! WHY could they have nmot shortened it up any? Why! It stiks out lik a bugger. too lomg, to much onverhang

I don't understand everyone issues with a short nose. To me it looks way to stubby and snubbed then almost like it was kicked in by running into a wall.

Did anyone buy and install one of these yet? - need real pics!

------------------

Indy Northstar-Stretch ~ LT1-NOS Roadster

Here's an 2003 for comparison:



It looks like the Fiero nose shape is retained and the bumper / skirt is Lotus V8 Twin Turbo style...

[This message has been edited by Fiero2m8 (edited 12-08-2008).]

i wonder how that last pic would look with Archie Rockers

The bumper is back on ebay for $399 shipped, but not sure if the kits are coming from the same place.

This other place sells the whole kit all the way around or individual pieces. Not sure about the pricing, but it might be a little cheaper for a single buyer or group buy. Here check this web site out.
http://fierokitbynite.com/index.html

[This message has been edited by A1MEFGT8488 (edited 12-31-2008).]

what winglets (!?!)

[This message has been edited by PaulJK (edited 12-31-2008).]

Nice bumper!!!

Bump to see if the pics above ever became painted, etc.!

what about the ferrari 430 rear bumper??? very interested in that. plz update me the status of the 430 rear bumper plz plz :-)

[This message has been edited by ghost187x (edited 07-27-2009).]

Any new info 2010 now or did anyone ever get there fiero painted up with this lotus nose?

------------------
Say no to socialism communism marksism maoism and say yes to Freedom! God Bless America!
1986 black gt fast back 4 spd recently rescued. 1987 gt fastback 5 speed! Hopefully swapped before end of summer.

quote Originally posted by ozzy83: Any new info 2010 now or did anyone ever get there fiero painted up with this lotus nose?

I've been calling and emailing about getting some stuff from them, never heard back

Any news on this at all...still would like one

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Lots of work if I get a hold of 1 of this, I'd either move the 2 headlights forward by cutting and adding spacers or get rid of the front bumper support and just cut the lotus bumper and re-fiberglass it to get it closer to lotus look, or just leave it as it is.

Are these front bumpers available? from ?
Thanks

------------------
Stefan - Fiero Miami - T-top - 88

These winglets... took me a bit to see them too,but then I was like "ah-ha!"

------------------
"He took my stapler. I could burn this building down."

quote Originally posted by Amida: They should also make some belt-less fenders & door panels to match the nose.

http://angelonearth.net/customfiberglass.html

Door panels at least. May make fenders in the future, once I get some other molds made. Already have the molding grooves filled in on a pair ready to pull molds.
~ Paul
aka "Tha Driver"