thanks,
I did manage to do some more work on the bumper on monday. sanding and shaping it still has a little way to go. I think I will need about 3 more solid days on it to get it done.
with things being tight all over I have to do the jobs that pay first to keep the shop open so bare with me. I should be able to get it ready to send out soon.

I have also just started a new one as well that will be on the new show car and if I can get it done in time I may send it to have molds made before I install it on the car for paint but we will have to see how it plays out.
I will keep you all posted.
D.

quote Originally posted by whodeanie: thanks, I did manage to do some more work on the bumper on monday. sanding and shaping it still has a little way to go. I think I will need about 3 more solid days on it to get it done. with things being tight all over I have to do the jobs that pay first to keep the shop open so bare with me. I should be able to get it ready to send out soon. I have also just started a new one as well that will be on the new show car and if I can get it done in time I may send it to have molds made before I install it on the car for paint but we will have to see how it plays out. I will keep you all posted. D.

hey whodeanie,
I'm still interested in buying a rear bumper from you.
I talked with you for a little bit at the Dells Run this year.
when you have one to sell please let me know, I'll buy it

quote Originally posted by gtxbullet: hey whodeanie, I'm still interested in buying a rear bumper from you. I talked with you for a little bit at the Dells Run this year. when you have one to sell please let me know, I'll buy it

sounds great, I want to get it done soon it has been in the works for too long now because I have had other things that need finished first.
D.

Bump

I have the painter finishing up the bumper he is just cleaning up the intire thing and will be spraying it in primer so that I can send it down to Dan for molds and parts to be made.
he will have it ready to go this next week. I will get pictures before i box it up.
D.

[This message has been edited by whodeanie (edited 10-23-2010).]

Awesome I'm definitely in for one.

how can I get more info about the rockers? ETA, etc...?

quote Originally posted by msweldon: how can I get more info about the rockers? ETA, etc...?

those are still a work in progress. it takes time to get them done with the other work I have as well.
D.

I was able to work on the rockers today. they will not be far behind the bumper. I will keep you all posted as they get closer. I will try to get some good pictures of them this week and post them.
D.

I would also be in, as long as they are not like $600-700.

quote Originally posted by whodeanie: I was able to work on the rockers today. they will not be far behind the bumper. I will keep you all posted as they get closer. I will try to get some good pictures of them this week and post them. D.

say, would it be possible to have solid rockers with no scoops?

I'm still up for the rear bumper once you have a few to sell.

[This message has been edited by gtxbullet (edited 10-28-2010).]

I would not see what the benifit would be in having a blank set but I guess I could do it that way if I had enough people that wanted them.
I have another idea for a second set that will be in the works for next year. just a little diferant style because not everyone likes the same thing.

my goal is to have about 10 -12 products to sell to help cover overhead at the shop so I can stay working on what I love.
it only takes time and money and at this time both are tight.

As many of you know I have kept a few projects form all of you until I got them farther along and now I am ready to share another one with all of you. I will be starting a new thread for this part.
I am about 3 weeks away from having a working buck of the 360 -430 style rear that will bolt on to your fiero. In the next few weeks I will get pictures up on the other thread.
the 355 rear will be finished this week and the rockers will be ready in the next 2 weeks for molds.
D.

the 355 rear body work is done and will be in primer monday and ready to box and ship to Fiero Fiberglass for molds. I will get pics of it before I box it up and post them for all of you.
D.

It's DONE! it is in primer and will be boxed up to send to Fiero Fiberglass for the parts to be made and sold.
I talked to JimmyS today and they will start taking preorders soon.
get on the list now.

here are some pictures of it just sitting on one of my parts cars I had outside just to get a few shots for all of you before I box it up.
we will set a price for it once the mold is done and parts are ready to be made.
D.

The pictures do this bumper no justice. it is way nicer than the one I did for the DD.
I will be shipping it out on monday to have the parts made.
D.

I'm a good visualizer, but I can't quite put this one onto a fastback, and I'm not finding any fastback pics that are close enough to PS (these pics are very close-up, I can't find many others that are).
Is there any way you can get it onto a fastback, or take pics of a fastback from the same angle as one of these pics? I'd like to get a decent PS together for all to see exactly what it's going to look like.

Overall, I think it looks good.

[This message has been edited by ALLTRBO (edited 11-12-2010).]

Here are some pics of my first gen one on the DD project. the new one is way better with more detail but thefit is the same.
D.

[This message has been edited by whodeanie (edited 11-13-2010).]

Well that's a big DUH on my part I guess, heh.
I was thinking that they were shaped more differently. You made the ledge stick out a bit less on the new one, right? It also looks like the bottom doesn't curve under as much.

Anyway, I guess it is close enough to get a good idea, thanks.

Dean, Looks very nice...

------------------
Steve
aka. SmoothGT
- NotAFieroAnyLonger
CURRENT BUILD:
" SmoothGT-'w8nc' "
1987 Fiero V8/hybrid
1999 Lexus SC-400

Well there's not much to do while sitting here in pain, so I figured I'd digitally load up the bumper onto my Fiero (though the car isn't going to stay red). This PS also has Amida's Fi512TR front bumper (I put a deposit one of those) and a more aggressive 1/4 scoop. The rest is as it sits.
I actually used pics of a real 512TR and F355 for this PS.
With some design of matching of sideskirts I think these will look fantastic together.

[This message has been edited by ALLTRBO (edited 11-14-2010).]

Ok, all the bumper is on it's way to Fiero Fiberglass for molds and parts.
D.

Dan from Fiero Fiberglass has the bumper now and is starting molds so parts should be ready soon. I myself can not wait
D.

quote Originally posted by whodeanie:

Dean, what are the rockers and side scoops on this car called? Are they one off or can a man buy some of these? Thanks.

It almost seems that everyone has lost interest in this bumper since you started the F430 bumper. Well, everyone except me. I'll take this one anyday over that one. Looking forward to completed and installed pics and price from Jimmy. Hopefully the price won't be over the top.

Thanks again for the work, whodeanie. It's nice to have more options.

------------------

'88 Fiero GT - Project MIDTRBO
'10 Camaro LT/RS
There's no replacement for turbo placement

quote Originally posted by GADJet: Dean, what are the rockers and side scoops on this car called? Are they one off or can a man buy some of these? Thanks.

The side scoops are the GT Style #1 scoops from www.fierofiberglass.com The tapered ground effects are also from us. The lower rockers are a work in progress and will also be available thru Fiero Fiberglass in the future.

Just a bump to remind everyone that this will be ready soon for sale
D.

I love that bumper as soon as i get a few things taken care of hehe it will be mine.

I just found this thread, and would be highly interested in being in line for one. If the price isn't too much that is. Love your work its absolutely amazing.

------------------
86 2.8 gt

they should be ready in the next few days now. you can buy them threw Fiero Fiberglass contact JimmyS
D.

Thanks!

'bout time.

We should be pulling the first one out of the mold sometime this week.

quote Originally posted by JimmyS: The side scoops are the GT Style #1 scoops from www.fierofiberglass.com The tapered ground effects are also from us. The lower rockers are a work in progress and will also be available thru Fiero Fiberglass in the future.

Do you think the GT Style #1 will look ok on a Notchie coupe? This and the rockers and a nice set of wheels will make my car look nice. Just tossing around ideas. Thanks.

quote Originally posted by GADJet: Do you think the GT Style #1 will look ok on a Notchie coupe? This and the rockers and a nice set of wheels will make my car look nice. Just tossing around ideas. Thanks.

My suggestion if you want to install the GT Style #1 Side Scoops onto a notchie coupe is to get a set of stock door and fender ground effects and also a GT Front Bumper.

the bumpers are ready call, PM, email JimmyS to order
should have pictures up soon.
D.

I have 1 bumper available. Price is $450 + $80 shipping.

Shipping is by Greyhound.

I will send and invoice thru paypal to the first person who says they want it.

PM me your paypal addy.

Jimmy expect a call from Dirty Harry, i let him know it is ready.

He has been waiting for one of these for a long time.

Cool. Thanks Tony

when are these gonna be up on the website?