the piece with the compartment and covers the computer?

Looking for the air cleaner assembly which would be three pieces. The mount, the cannister and the top cover with wingnut. I don't need the rubber air inlet duct. $25 shipped?

quote Originally posted by Fiero GS: Looking for the air cleaner assembly which would be three pieces. The mount, the cannister and the top cover with wingnut. I don't need the rubber air inlet duct. $25 shipped?

the ring that the tube slide on to the canister is rusted out.. still useable.. i can get pics if you like.. as soon as it stops snowing long enough to uncover the car

ok. Also looking for the oval shaped metal plug that goes behind the passenger seat under the carpet.

and yes that thing

quote Originally posted by Fiero GS: ok. Also looking for the oval shaped metal plug that goes behind the passenger seat under the carpet.

ill try to find that

bump.... heres the craigslist add. im trying to get rid of the car for 225 USD http://asheville.craigslist.../pts/2172100353.html car is only good for chassis/frame, engine, and tranny.. most body parts are gone

Before you get rid of it I need something. There should be a metal bracket on the frame by under the rear bumper that the bumper was attached to. It is in the center of the bumper at the very bottom between the exhaust cutouts, it should be just a long Z shaped bracket attached right by the underside of the trunk.

-Joe

hmm could u provide a pic? if its the piece the egg crate attaches to its already sold? if its not it should be quite easy to get to

Sorry I dont have a pic as I dont have one. It should be fairly obvious if the bumper is removed though. It is not attached to the egg crate. It should be at the very bottom of the car right behind the trunk tub. I assume it is some metal bracket that probably is held on with push rivets and has maybe 4 or 5 holes on the bottom side of it for the bumper to attach to.

Let me know

-Joe

okay ill take a look.

Still have a pass side taillight, drivers side door panel (power window version) and turn signal stalk? What would total be to 33434?

Thanks!
Stan

------------------
~Stan
http://www.StanHinesleyPickups.com
-----------------------------------------------------------------------------------
"No, it's not an MR2!!!"

that plastic piece sounds like it! I didnt know it was plastic, just assumed it was metal. Anyway how much for it shipped to 34291?

Thanks
-Joe

quote Originally posted by shinesley: Still have a pass side taillight, drivers side door panel (power window version) and turn signal stalk? What would total be to 33434? Thanks! Stan

no stalk or doorpanel but i do have both tail lights but they are delaminated.. you can have both for 20 dollars plus shiping

Do you have the trunk lock cylinder plate? The piece located on the inside of the trunk that holds the lock cylinder in place. It has 2 screws I think to remove it. If so, how is $10 + shipping to Toronto Canada?

i dont think its anygood.. the trunk was basically pryed open by thepervious owner and doesnt latch anymore

I'm looking for the rubber air intake tube for a V-6 (from the throttle body the the air cleaner assembly). If you still have it, I'll take it. There's one listed on E-bay for $10 + shipping. Does that sound fair? Thanks, John

i do have it and that sounds fare since i had already taken it off the car a cleaned it up a lil for someone buying it but the y backed out and its been sitting in my laundry room for three months lol

Outstanding! PM me your Paypal addy and I'll send the funds. Thanks, John

Sorry, forgot to give you my addy. 405 Monroe Street, Freemansburg, Pa. 18017

Did you think of a price on that bracket yet?

-Joe

quote Originally posted by dmcgreene: okay so the back of my car i see the frame the bumper support connects to.. and betwwen them is the trunk wall. the only other piece i see is a little plastic piece thats z shaped about 2 feet long that attaches to the bottom of the bumper supprt thinf with some rivet type things

im still trying to figure out if its the write piece> i can get a pic if you would like

[This message has been edited by dmcgreene (edited 02-12-2011).]

Thats the one I need.

-Joe

good hows 15 plus shipping?

Fine for me. I have paypal let me know how you want to work it.

-Joe

Looking for good condition carpet (both sides) and the interior firewall panel if in good shape(behind seats)

quote Originally posted by joesfiero: Fine for me. I have paypal let me know how you want to work it. -Joe

okay ill get a quote and i have paypal also so well go with that lol

paypalled. Thanks

-Joe

joe.....thanks it will be shipped 1st thing in the morning and i will pm you with your tracking number


Johnmiller... urs is boxed up and ready to go, just awaiting payment.


all others.. pending, theres a guy comeing tonight to possibly by the car

[This message has been edited by dmcgreene (edited 02-13-2011).]

I'm looking for both ashtray doors. I need the tabs on them to not be broken.

sorry i sold the car a few weeks go