Please let this thread die THANK YOU !!

[This message has been edited by Danyel (edited 10-06-2011).]

.

[This message has been edited by Danyel (edited 10-06-2011).]

.

[This message has been edited by Danyel (edited 10-06-2011).]

If I just replace the side markers and keep all other lighting OEM, will there be any issues with using the OEM flasher?
I recently converted the DRLs on my 2000 TA to LED and had to change flasher to get it to work properly.

Thanks.

Formula88 --- all the people who have my kits did not have to change the flasher unit... the flasher tempo may slow down a bit ... you can now get electronic flashers for 10 to 17 dollars each on Ebay.

Danyel

I wasn't worried about needing a flasher. I got one for $12 at AutoZone for my TA. I just wanted to verify if it was needed. Thanks for the clarification.

You have mail I will take a set of smooth for my chop top GT! Nice work!!

------------------
87 FIERO GT ( CHOPT TOP ALMOST FINISHED)
SEARCHING FOR MY NEXT GT TO CHOP
08 CORVETTE Z06
10 CAMARO SS
07 JEEP WRANGLER 4 DOOR

.

[This message has been edited by Danyel (edited 10-06-2011).]

Any chances these can be designed to sequence? I see these and then think, wow, what if the sequenced fast?

.

[This message has been edited by Danyel (edited 10-06-2011).]

Definitely standing by for the LED turn signals ......

I'm confused. Are you affiliated with TLG-Auto.com?
Are you using the same LED strips they sell?

.

[This message has been edited by Danyel (edited 10-06-2011).]

PM envoyé

PM replied

quote Originally posted by Danyel: No I am not affiliated with TLG ... here are the differences between the two. 1. My LED strips are weatherproof. 2. The wiring uses the OEM hole in the marker (TLG wire are at the end of the marker *see pic in next post*) 3. I sell mine 150$ + 25$ for shipping and handling to the states. 4. Mine carry a 6 month insurance against LED burn outs 5. I only use NEW sidemarkers ribbed or smooth (TLG will convert your old markers) 6. If you send me new markers from Fiero Store you will pay alot less for upgrade. 7. I do not sell DIY kits .... TLG does 8. TLG is one of my sponsors for other items and their LED kits are EXCELLENT TOO !!! Danyel

Thanks for the info.

I'll probably take one smooth set but just want to see your new 7 segment before passing the order

.

[This message has been edited by Danyel (edited 10-06-2011).]

ICELANDER your kit was sent
FIEROSMIGLA yours are sent... PM'd you tracking
87GT2M6 - Paypal request sent
FIERO2M8 canadapost says they did an shipping error .... I have a set standing by ... will ship if needed via another service please call me at PM'd number

quote Originally posted by Mirriador: I'll probably take one smooth set but just want to see your new 7 segment before passing the order

I'm also interested in a smooth set, and curious about the new variant, but would be curious to see a lights-turned off picture first. Anyone in Northern Massachusetts have a set I could look at on their ride?

Thanks in advance,

-- Steve
Blue87t-top

I'll be posting photos soon.

Thanks

A1 product.

Curiously waiting to see the sequence ones in action

[Subscribed!]

[This message has been edited by JohnWPB (edited 03-30-2011).]

.

[This message has been edited by Danyel (edited 10-06-2011).]

PM replied.
Got them today well packaged.
Looks like nice product as advertised.
Package is stamped mailed after cutoff time March 22nd.
No way it should have taken 8 days for expedited.
Canada post screw up guys not Danyel.

------------------

Indy Northstar-Stretch ~ LT1-NOS Roadster

Fiero2m8 --- feedback left .... waiting on your spare set
thanks and take care

Danyel

What is the difference between ribbed and rounded? Can someone show pictures?

I will def be ordering these! But I want to see the surprise with the front LED turn signals. What will be the package deal for all 6 markers?

Thanks! Great work!

Also, Danyel would you ever produce LED rear lights for a notchback?

[This message has been edited by FirstDrCar (edited 03-30-2011).]

FirstDrCar ---- rear LED tails are in the planning stages I'm waiting for my supplier to come up with a quote ... the only thing holding up is that quote and my PCB manufacturer .... will keep you all updated ......

Formula88 request sent thank you

Danyel

I presently have a set available .... ready to ship.

FirtsDrCar -- rounded or smooth came with the 86 - 88 GT and the Formula I may be forgetting one but the 84 to 88 SE and Coupes and the 85 GT had ribbed...

.

[This message has been edited by Danyel (edited 10-06-2011).]

PM SENT!!!!!!!!!

VERY nice work... but

I thought you were doing something with the side markers for the turn signal or something hehe. I can't use these, as I have a F355 front bumper

This is really cool in every way though!

Anxiously awaiting the finished product so that you can set a package deal!

Great work by the way. + for you!

Also watching for a package deal and finshed front markers! Great work!

What are your customer supplied TFS markers cost?

quote Originally posted by BoostedSeries1: What are your customer supplied TFS markers cost?

Do you mean if you send the TFS markers to me ... how much will it cost ??

PM me I will ive you all the available options .... thanks

Bump for you. Still waiting. Love the product you are producing.