I machined up some consentric rings for the 84-87 12" Vette brake swap listed here. https://www.fiero.nl/forum/Forum2/HTML/063914.html I'm using 6061-T6 Aluminum for the rings and you can get them for the 84-87 and 88 hubs in a set of 2 or 4. I will update this first post with updates and order status.

Brackets coming this winter!


Cost:

$60.00 shipped for a set of 4 (in usa) Add $10.00 for shipping to Canada.
$30.00 shipped for a set of 2 (in usa) Add $10.00 for shipping to Canada.

Payment: paypal@snapperheadperformance.com

Please include what your paying for, 84-87 or 88 also 2 or 4 rings, your Penock's ID and the shipping info in the paypal payment.

If you need special size let me know and I should be able to run off a set for you. Price may change on the special run.

Thanks,
Vince

All machine work is done after order is place. It should take less than a week to ship.

************Your Order Status*************

1. MstangsBware - Received
   
2. Hooks - Received
   
3. Fieroking - Received
   
4. John316 - Received
   
5. LZeppelin513 - Received
   
6. rourke_87_T-Top - Received
   
7. John316 - Received
   
8. ace5514 - Received
   
9. sspeedstreet - Received
   
10. Fiero Tom - Received
    
11. Imacflier - Received
    
12. LZeppelin513 - Received
    
13. raccoons - Shipped
    
14. Danyel - Shipped
    

Here is a photo of 1 set I made for large bearing front hubs and stock rear hubs.



------------------

Snapperhead Performance - Custom Hot Rods & Accessories
Your Complete Online Speed Shop - Stainless & Acrylic Deck Lid, Hood, Trunk & Door Sill Plate Mirrors - Vette Brake Swap Consentric Rings - Powder Coating Service - Hidden Trailer Hitch - LED Reverse Lights

Threads:
Used Fiero Parts - Custom LED Back Up Lights - Hidden Trailer Hitch - Mirror Panels - Door Sill Mirrors - Vette Brake Swap Consentric Rings

Rides:
85 Fiero Gt, Green "Grasshopper", 86 Fiero GT, Blue, V8 " Snapperhead" 2013 Fierorama Best of Show Non-Stock, 87
GT Met Orange, 88 Formula White stock soon to be 4.9 met Blue like Snapperhead--- 10 Camaro, 99 K2500 Suburban,
04 Trailblazer

[This message has been edited by Snapperhead (edited 12-31-2013).]

pm sent

I'm still waiting for the brackets from that thread..! -Jason

put me on the list

quote Originally posted by Fierofreak00: I'm still waiting for the brackets from that thread..! -Jason

I may do the brackets coming up.

quote Originally posted by Snapperhead: I may do the brackets coming up.

Great! I've had the calipers, bridges and rotors for about 2 years now....
But, I really hate to sound like a broken record....this will be the 7th time someone has said they would make them... I really hope you come thru! -Jason


(but you still get a positive rating just for thinking of me

Ok I've ordered supplies for the consentric rings and brackets. I will machine up the rings and ship them out first then move on to the brackets. I will post when ready, about a week for the rings.


Thanks, Vince

quote Originally posted by Fierofreak00: I'm still waiting for the brackets from that thread..! -Jason

You mean these?

------------------

Indy Northstar-Stretch ~ LT1-NOS Roadster

Ok, supplies here and started machine work. If you want a set of rings and have not let me know, PM me also let me know your year.
Should have them done by the end of the week.

Vince

All orders filled still have lots more if anyone needs a set or two. I have pre88 and 88 sets. I'm going to dump them on Ebay if they don't move here.

Vince

I'm interested. What other custom parts are needed for this swap onto a pre 88 and where can i get them? That thread linked at top that was supposed to “clarify the swap” although very helpful, seems to breezes over a few of the mods, has a few this worked for me but not me and is a little old so some links are dead. Is there a better or possibly more up to date “how to” that is out there somewhere?

Edit to clarify

[This message has been edited by DLCLK87GT (edited 06-30-2010).]

I will most likely machine the brackets and the front hubs, but I'm to busy right now to do them. I think I will do it this winter a good winter project. It's not a hard conversion and has been posted many times on the net and forums.

Vince

You have a PM

Joe Sokol

------------------
85 SE Daily driver with a 3.4 DOHC OBD II
88 Formula/GT 4.9 Allante Intake (My Baby)

quote Originally posted by Fieroking: You have a PM Joe Sokol

Back at ya.

Vince

Got my rings today, very nice thankyoou very much


Hooks

quote Originally posted by hooks: Got my rings today, very nice thankyoou very much Hooks

Your welcome enjoy them..

Thank you

Vince

quote Originally posted by Fieroking: You have a PM Joe Sokol

Rings shipped.

Thanks,
Vince

you still makin these

Still would like the brackets, are you still planning on making some sets? -Jason

quote Originally posted by merciero: you still makin these

Yes in stock ready to ship and your PM returned.


Thanks,

Vince

could you make me a set ( 2 rings ) for the rear of a 88 that would work with 12 inch C4 corvette rotors?

quote Originally posted by Erik: could you make me a set ( 2 rings ) for the rear of a 88 that would work with 12 inch C4 corvette rotors?

I have rings instock ready for shipping. See first post for payment info and updates.

Thanks,

Vince

quote Originally posted by Snapperhead: I have rings instock ready for shipping. See first post for payment info and updates. Thanks, Vince

cool...The rotors I have are tapered on the backside of the hat so the rings need to be thick enough. I currently have some rings that arent thick enough. Just wondering if you have accounted for that before I order, thanks

quote Originally posted by Erik: cool...The rotors I have are tapered on the backside of the hat so the rings need to be thick enough. I currently have some rings that arent thick enough. Just wondering if you have accounted for that before I order, thanks

I have not have any problems yet, I have checked them with all the local parts stores in my area before I put them up for sale. They are 1/4" thick if you need a different thickness I can make you a custom set at the same cost.

Thanks,

Vince

quote Originally posted by Snapperhead: I have not have any problems yet, I have checked them with all the local parts stores in my area before I put them up for sale. They are 1/4" thick if you need a different thickness I can make you a custom set at the same cost. Thanks, Vince

OK I will measure and get back to you. Currently I am just running 12 in C4 rotors up front due to the fact that I have to stack 2 rings together to get the appropriate thickness which leave me none for the back.

John316

Your rings on the way

Thanks,

Vince

Just a bump

Vince your a busy guy. Keep up the good work.

Steve W
NE Grand Rapids, MI
88 Coupe

quote Originally posted by solotwo: Vince your a busy guy. Keep up the good work. Steve W NE Grand Rapids, MI 88 Coupe

Thanks,

Vince

I have these installed and they work great. Thanks and feedback left.

Edit: Mine were for an 88 in case anyone with an 88 is considering these.

[This message has been edited by LZeppelin513 (edited 12-28-2010).]

quote Originally posted by LZeppelin513: I have these installed and they work great. Thanks and feedback left. Edit: Mine were for an 88 in case anyone with an 88 is considering these.

Thanks for the update, feedback and kind words. It's very rewarding to be an asset to the Fiero owners.

Vince

Just a bump for the winter projects

rourke_87_T-Top
Shipped today.

Thanks,

Vince

Got em. Thnx.

Vince,
i have a question...do you make these yourself?
if you do, would it be possible to make the front two rings about 3/4" long and the rears the regular length. this would enable me to use hubcentric rings on my rims too.
i have an 87 gt and the front hub is almost non existant when the rotors are instaled. a longer front rotor ring would allow hubcentric rings to be used in the rim.
thanks
al
oops i just realized this is for the pre 88 vette rotors and i think the rotors i need are for the 88 and later 12" vette rotor. well do you make those too?

[This message has been edited by ace5514 (edited 03-03-2011).]

quote Originally posted by ace5514: Vince, i have a question...do you make these yourself? if you do, would it be possible to make the front two rings about 3/4" long and the rears the regular length. this would enable me to use hubcentric rings on my rims too. i have an 87 gt and the front hub is almost non existant when the rotors are instaled. a longer front rotor ring would allow hubcentric rings to be used in the rim. thanks al oops i just realized this is for the pre 88 vette rotors and i think the rotors i need are for the 88 and later 12" vette rotor. well do you make those too?

I do all my own work in house, so I could make them what ever size you want them. I just need the specs you want them. The cost may change do to size and machine time.

Thanks,

Vince

[This message has been edited by Snapperhead (edited 03-03-2011).]

cool,
i'll see if i can find out the hub diameter of the 88 and newer 12" vette rotors and i think the hub diameter for the 87 fiero is like 57.1 mm.
i think just under 3/4" long for the fronts would be more than enough. i'll see what i can find out about the rotors.
thanks
al

quote Originally posted by ace5514: cool, i'll see if i can find out the hub diameter of the 88 and newer 12" vette rotors and i think the hub diameter for the 87 fiero is like 57.1 mm. i think just under 3/4" long for the fronts would be more than enough. i'll see what i can find out about the rotors. thanks al

pm sent

quote Originally posted by ace5514: Vince, i have a question...do you make these yourself? if you do, would it be possible to make the front two rings about 3/4" long and the rears the regular length. this would enable me to use hubcentric rings on my rims too. i have an 87 gt and the front hub is almost non existant when the rotors are instaled. a longer front rotor ring would allow hubcentric rings to be used in the rim. thanks al oops i just realized this is for the pre 88 vette rotors and i think the rotors i need are for the 88 and later 12" vette rotor. well do you make those too?

Rings done and shipped....

This front ring set will center the wheel as well as the rotor, I machined them up per ace5514 specs, nice design Al



Thanks,

Vince

[This message has been edited by Snapperhead (edited 04-04-2011).]