it has been a lot of work but we finaly have molds for the rear 430 bumper as well as the hips and we are working on many other things as well that will be ready for sale soon. but for now we will start with this. all of our parts are made to be as easy to install as we can make them and fit without major work. we use an ISO resin that will not warp. it is a bit more money to do this but the end product is well worth it. the parts are made to the highest quality.
the 430 rear is a bolt on part with only small mods required. it will fit any fiero. the part was made to accept GT inner fender wells and round moldings. the only mod needed to install this will be the removal of the egg crate behind the stock bumper not the crash bumper. and you may need to relocate your exhaust tips. the price for this is 650.00 + shipping the part is large but light weight. here are pics of the first one.
we are now taking orders for them for shipping in July on a first come. the parts will be made to fill orders as they are placed.
the next part for sale are the hips. this kit was designed to give your car a wide hip look without the need for expensive wheels and tires. it is the stock wheel opening with just the hip wider at the top. this is a 4 part kit it comes with 2 upper door caps and 2 hips. they are designed to install with as few mods as we can. the door caps are made to replace the top of you door skin and be bonded to the lower in the belt line. the rear is the same way with minor adjustments to the gas door area and the top seam of the hips were it meets the body. you can cut away the sides but no need it will bond over the top of the stock side. this kit will sell for 600 + shipping. same as the rear we will be filling orders to ship out in July.
all orders must be paid in full before they are shiped out. we can take deposits for parts by card, check or money order. 50% when the order is placed and the rest on the day of shipping. we can ship them any way you like. they are light weight.
shipping qoutes will be on an order only I do not have time to get them quoted everyday. my zip if you would like to get an idea is 30189 thanks, Dean
you can place orders by phone or PM, I get them the fastest. we are working on the website and as soon as it is up you will be able to place orders on line with all forms of payment.
[This message has been edited by whodeanie (edited 06-01-2011).]
IP: Logged
08:49 AM
PFF
System Bot
Axdrenalin Member
Posts: 478 From: Mountain City, Tennessee Registered: Mar 2011
Would help if we could see the "hips" mounted on a car so we can have an idea as to what the car looks like... Thanks.
I will be reinstalling this set on the Rotten chop project soon and I will get install pics for them as well. you can see the plugs we made on the car in the Rotten chop thread in General. it will show you the rear as well as the hips. D. https://www.fiero.nl/forum/Forum1/HTML/084025.html
page 7 and 8
[This message has been edited by whodeanie (edited 06-01-2011).]
IP: Logged
09:02 AM
GT86FASTBACK Member
Posts: 757 From: Monroeville, PA Registered: Jul 2009
Wow... that is sharp looking... I like that. I was thinking about going Arch widebody but I like those hips with the nice lines on them... What is the biggest wheels and tired u can run on those? I am sure its not as big as the widebody but...
(sigh!) Here at my work, they block anything they consider "social media", and that includes photobucket. Pictures posted with PIP, however, I can see.
Originally posted by GT86FASTBACK: Would help if we could see the "hips" mounted on a car so we can have an idea as to what the car looks like... Thanks.
Yes, I'd like to see the 430 rear installed too. Marc
IP: Logged
09:14 PM
whodeanie Member
Posts: 3819 From: woodstock,Ga.,USA Registered: Jan 2008
Yes, I'd like to see the 430 rear installed too. Marc
we will be making sets for the notchie as well but it will take some time to get them done. if you look at the Rotten chop thread you can see the rear as well. both parts were made off this car. D.
IP: Logged
10:45 PM
Daredevil05 Member
Posts: 2345 From: South Jersey 08077 Registered: Oct 2006
we will be making sets for the notchie as well but it will take some time to get them done. if you look at the Rotten chop thread you can see the rear as well. both parts were made off this car. D.
Well when there made I'll take a set.
IP: Logged
08:51 AM
Daredevil05 Member
Posts: 2345 From: South Jersey 08077 Registered: Oct 2006
I am assuming that to properly install the hips the quarter window would have to be removed, correct? Also, do you have a strait on picture from the rear?
Thanks Nolan
[This message has been edited by Sourmug (edited 06-04-2011).]
IP: Logged
04:26 PM
iluvsd619 Member
Posts: 1036 From: san diego, ca Registered: May 2005
no one is ready to place the first bumper order? I am kind of shocked. but I an sure the times have something to do with that. it will be here when you are ready for them D.
IP: Logged
07:42 AM
ghost187x Member
Posts: 1026 From: El Paso, TX Registered: Oct 2008
I like
YES. YES. OH YESSS! 
