Originally posted by 85SEnochie: Round one Manual we could do this all day let me know if you like any of it? All I had to go with is the Billet Buttons
It is a standard but I will use the stock shifter and boot. What I was thinking is in my photo you can see the pencil line
outlining the piece about 3/4 of an inch. I was going to elevate that (and paint it grey) slightly and run neon ribbon lights under it. The RCP can
go that part of my life is past me I no longer build houses. What are the (3) switches in between the window ones? Thank you for your help Ray
EDIT to say holy sh@t I own page 27 first page ever lol
[This message has been edited by rcp builders (edited 05-06-2010).]
Originally posted by 85SEnochie: How is this? You prob wanted the neon to go inward instead of outward I will do that too.
Now where getting there. If I'm not being to much of a pain can we swicth the black to the outside and grey inside.
Then move the screws to the inside grey plate. Also can you round the corners of the inside plate and get rid of the
metal and screws around the shift boot. Last but not least if you have access to symbols can you add the
infinity sign to each side off the shift boot. Infinity sign is a stretched out figure 8 ( you probably already new that lol)
Thanks again it's nice too be able to actually see this stuff before I build it. I have paint shop pro but really dont know how to use it lol. thanx Ray
could someone take an Audi R8 and make it into a notchie? id like to see it directly from the side, and 45 degrees between the front and side (so facing directly at one of the front corners)
Now where getting there. If I'm not being to much of a pain can we swicth the black to the outside and grey inside.
Then move the screws to the inside grey plate. Also can you round the corners of the inside plate and get rid of the
metal and screws around the shift boot. Last but not least if you have access to symbols can you add the
infinity sign to each side off the shift boot. Infinity sign is a stretched out figure 8 ( you probably already new that lol)
Thanks again it's nice too be able to actually see this stuff before I build it. I have paint shop pro but really dont know how to use it lol. thanx Ray
How are we doing? Better? It is never a pain I love doing it! The thread is here to give you your dream in a photo so keep telling me what you like and don’t like. Sometimes it takes me a little while to get to have a family and job but again love doing it.
could someone take an Audi R8 and make it into a notchie? id like to see it directly from the side, and 45 degrees between the front and side (so facing directly at one of the front corners)
I did not understand what you ment by the 45 degree part but how is this?
Had to fix a couple of things the wiper was hanging way out there
otherwise yea thats good. what was your stock image tho? looks a lot different than a regular r8. seems taller and shorter lol. looks just like a fiero ;P
otherwise yea thats good. what was your stock image tho? looks a lot different than a regular r8. seems taller and shorter lol. looks just like a fiero ;P
Here is the Origanal I will do a 45 degree later. The First one is without modding the R8 at all. the second one brought everything down to fit gave it more Fiero lines
Nice pix's Hockaday sorry for the delay I am trying to get the computer and entertainment system all working together and functional not quite there yet but soon I'll be their
Nice pix's Hockaday sorry for the delay I am trying to get the computer and entertainment system all working together and functional not quite there yet but soon I'll be their
both of your images had the squared fiero-like roof and windows lol. otherwise you did very well
and Hockaday...that is a hot car.... 85SEnotchie, could you take the stock image and make a notchie out of it while not editing ANYTHING other than the back fastback parts? (basically turning the image into what Hockaday posted). dont get me wrong, you did good, its just your originally posted images werent exactly what im looking for
Originally posted by 85SEnochie: Thanks I am glad you enjoy this thread and I love doing it. This is the first picture took a little while to find but heck you are now sponsored. The more I played with it the more I liked it. Let me know what you think?
quote
Originally posted by larini74:
OK..so the above pick makes it look like a BMW M1.....which I've always thought someone should make a kit of for the Fiero.....
It would look like this
There is etch primer over the high fill for cutting back but this is rounded and looks wild in the flesh pics are just terrible going to be painted next few weeks it has a perfect underbody to match and is now ready to paint.
[This message has been edited by Australian (edited 05-31-2010).]
OK so I still do not have my system set up but was jonesing for some PS. I did this in paint LOL I will get to the request soon, again sorry for the delay.
BUMP to keep it alive hope to get back to PS here soon. I just may have to buy another Fiero so that I can do a sweet ride like this one as well as having one that still looks Fiero
bah dont do a rebody...rebodys are for people with out imagination....you have iimagination...my new mac gets there tommorow..intel powered...mwhahahahaha step up from my g4...
bah dont do a rebody...rebodys are for people with out imagination....you have iimagination...my new mac gets there tommorow..intel powered...mwhahahahaha step up from my g4...
Thanks Hockaday the part that is lacking is the skill and experience to get it done. I will probably do some things myself because it is cheaper we will see.
Congrats on the new computer hope it serves you well!
lizardo..fun to say...liiiizzzzaaarrrdoooooooooooo. shameless bump good to have ya back.
------------------ Cliff's 610th Positive Feedback Giver. #12 NYFOC Member In recent times, the custom aftermarket car/automobile roadwheel has become a status symbol. These wheels are often incorrectly referred to as "rims". The term "rim" is incorrect because the rim is only the outer portion of a wheel (where the tire is mounted )
Can you do another for me? I have a black notchie with a wing, tan interior, no window tint. I was thinking that the sail panels would look better if they were mirrored. I don't know if I want the verticle bar done or not. Would you mind showing me what it would look like both ways? Thanks!
When Hockaday sends me a PS program I will see what I can do. I can not find my PS program and do not have it on this laptop. I have GIMP 2 but can not figure out how to use the darn thing I apparently am a little retarded
The thread is here to give you your dream in a photo so keep telling me what you like and don’t like. Sometimes it takes me a little while to get to have a family and job but again love doing it. 
but soon I'll be their 
