I love Trans Am's. Still have one. So far I have owned a Cameo white 71 4-speed, a matching numbers 72 Lucerne Blue 455-HO automatic (still have it), a Bucaneer red 75 that I installed a 400 Ram Air III into, a white and grey 80 Turbo T/A Indy Pace Car, a white and gold 85 Turned Port automatic, and my last, an arrest me red 87 GTA Trans Am Tuned Port 5-speed manual that I ordered new. I'll probably be buried in the 72......
nice list there Rick i like the '80 turbo reminds me of the movie "Hooper" speaking of which, hey Rick you know what year the Red TA in the middle is??? 70's???? cuz it looks like the car in Hooper
so you guys think that GM killed the TransAm for the new Camaro like they killed off the Fiero for the Vette?? i saw a dude in a New Camaro, eyeballing me.......i was like" what??" too funny. the last time i drove my TA, the new body style Camaro was not out......hahahahaahahha!!! this could get interesting. time for a tune up, methinks
[This message has been edited by batousai666 (edited 06-13-2012).]
I think the red T/A in the middle is a 1979 with the 6.6 litre or 403 c.i. motor, last year of the big engine T/As. I had one of them and a 1975 with 455 c.i. motor....lots of fun!
[This message has been edited by I FAR I (edited 06-13-2012).]
I think the red T/A in the middle is a 1979 with the 6.6 litre or 403 c.i. motor, last year of the big engine T/As. I had one of them and a 1975 with 455 c.i. motor....lots of fun!
That body style was produced from 79-81. The 8 in, wide snowflake wheels designate the WS6 performance package. In 1979 the engines were 6.6 (Olds 403) or T/A 6.6, which the upgrade 400 Pontiac engine available only with the manual transmission. In 1980 the Pontiac 4.9 (stick or auto), and Turbo 4.9 (auto only) became available engines. In 81 the previous two engines were joined by the 5.0 Chevy V8 In certain states due to emissions. I believe the 5.0 was available with both manual and auto transmissions.
The 455 manual transmission T/A that I Far I had was relatively rare. It was brought out mid 75 after Pontiac fans mourned the discontinuation of the 455 at the end of 1974 as a regular production option. The 455's last year was 1976, which was also the first year for the infamous 'black and gold" special edition T/A's. A black and gold 76 with the 455 stick is quite collectible these days.
[This message has been edited by Rick 88 (edited 06-14-2012).]
right on you guys.......thats some good info. thanks
i have always been partial to Movie cars
Since you into movie cars, here is one you probably have not seen. Do a search for the movie "Hot Rod's to Hell" The movie car in this one is a 58 or 59 Corvette. The car is jacked up with a straight front axle, and a roll bar that looks to be made out of exhaust tubing. If you can actually find a copy to watch, this is a real late 50's cult film.
[This message has been edited by Rick 88 (edited 06-15-2012).]
I can't believe you found that footage. It's even cheesier than I remember. The cars a pretty cool though, except for that ugly Plymouth the family has.......
[This message has been edited by Rick 88 (edited 06-16-2012).]
After all that jagging around it turns out to be the ignition coil! The only thing is I now have a "Service Engine Soon" light on, and she stalls at idle, still an improvement.
It's kind'a dirty, think I should run it through the car wash????
After all that jagging around it turns out to be the ignition coil! The only thing is I now have a "Service Engine Soon" light on, and she stalls at idle, still an improvement.
It's kind'a dirty, think I should run it through the car wash????
Thanks for all the help team'o!
Wayne
Darn, I should not have said anything about checking the coil. I was hoping you were going to send the Mera to me as a "parts car" Wayne, disconnect the battery for a couple of minutes and then attach it back. That should clear you check engine light. You will have to drive it a few miles for the computer to re learn. It will run a little ragged until you do this. Take your other car thru the car wash, and pretend it's the red one.
I do not have: 7002, 7013, 7017, 7020, 7021, 7025, 7028, 7029, 7030, 7035, 7040, 7041, 7042, 7044, 7047, 7048, 7051, 7052, 7054, 7055, 7057, 7059, 7060, 7061, 7062, 7064, 7066, 7074, 7076, 7084. I have 7085 as the last 87 on my list from Corporate Concepts. I do not know if there was a 7086 and up Mera.
Rodney Dickman Mera Registry
Mera #7013..... has a nice ring to it. but, i still think i have #7002
Are we back on trying to number your car? (You can tell when times are slow in this thread) LOL
no, not really. i had just emailed myself my" Mera Owners In MI" thread from the tech section and was waxing nostalgic. i am confident that i have #7002. but you know..............it would be nice to have some closure after all the time and effort
actually i posted Rodneys quote, for the shear fact of how many holes are in the registery.....and the statement about having 85 recorded instead of the rumored 88 1987 Mer(i) which is where i jumped to an assumption of 2 Prototypes. the 1986 and mine the Automatic proto, maybe................
Plus i miss my baby;(
[This message has been edited by batousai666 (edited 06-25-2012).]
Have any of you talked to Tom (Fiero-In-Paradise) lately? I don't really follow this thread but I haven't seen a post by him in months.
Just curious,
Dr. W.
------------------ Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project
Have any of you talked to Tom (Fiero-In-Paradise) lately? I don't really follow this thread but I haven't seen a post by him in months.
Just curious,
Dr. W.
nope....... and i rarely see posts from him elsewhere on the PFF, also. hope all is good with our Polynesian Pal
i got a random email from him on June7th 2012.....its was a forwarded mass mail from someone else about a bridge in China. so hes is still kickin just not kicking it with us
[This message has been edited by batousai666 (edited 06-25-2012).]
Quoting a question from the auction : in what universe will a 6cy fiero spin the "wide tires"??
Since you specified a six cylinder engine, I have at least one that can qualify. It has a manual Getrag 282, 3800 SC Series III engine with XP cam, intercooler, N* TB, 3.4 pulley and has certainly managed to spin 265 x 50 x 15 tires.
nahhhh......its a 328. i dont even like the real 328's with a real quick skim thru the pics and i notice its got a set of wheels almost like my CenterLines and it has Mera1 tail lights. and whats with the pesudo-308 trunk. i assume it does not open at the line. anybody?? huh..........
time to go into "stare" mode............
*edit* 1st negative observation.......wots wot with the reverse lights or lack there of??
[This message has been edited by batousai666 (edited 06-26-2012).]
anyway i dont need "Mera"parts, silly.....i need Fiero parts, i still think i have a bad rod bearing (at the most i hope) or a bad lifter. i am about to be kicked off the MI extended extension for over 9% unemployment so i am afraid to commit even $500 to the Mera and still may have to off the TA just to pay bills. it is totally absurd that i have not gone back to work yet!! how the other people gonna get a job if i dont build the building that they would be working at!!?? COME ON ECONOMY.......FILP ALREADY!!!DAMN!!
anyway......Waynum and Julian are gonna get me thinking about Me Mera again and i will have to bust a photo slideshow of...........
"Why I Think My Mera Is Mera #7002"
thats a great idea........hahahahahaaahahahaawaytogoguysaahahahaahahhahaa
[This message has been edited by batousai666 (edited 06-26-2012).]
that should break about $2000 for the Mera and I get to keep the TransAm!!!!! booooy howdy, thats awesome!!!!
now i got some thinking to do......3.4L or rebuild the 2.8??
any youz guyz got a ballpark, what i can get for $2,000?? i still need that poly swap done tooo......whats that $5-600 right there?? ohhhhhhhhhhhhh happy hot as heck day.......we made it to a few ticks under 100* today hollar at your boy!!
you know, ole Richard (Johnny) Holmes aint been around in awhile either........
ohhhhh Richard!!! " whats shakin baby??"
John was older than me, but he always called me his "big" brother ;-)
Well, it is the "warm" season here. Julian will be here in a couple days, he can give you guys a report. I just wonder if I'll be expected to visit Ontario in February.
John was older than me, but he always called me his "big" brother ;-)
Well, it is the "warm" season here. Julian will be here in a couple days, he can give you guys a report. I just wonder if I'll be expected to visit Ontario in February.
really?? thee Julian??? star of cover and dreams why, you sneaky little so and so's......that snow-man is gonna melt. there had better be photos if he shows up in "Mello Yello"
[This message has been edited by batousai666 (edited 06-29-2012).]
You guys kill me.... Apparently it's not hot enough here in the North East where we just hit 100F..... so I thought I'd go to Arizona. I hear they hit 115F but they tell me that is dry heat. I always wanted to know what "dry heat" feels like, so I opened the stove, set it to 115F and stuck my head in there...... too bad the tickets are prepurchased for Arizona! Frick that's hot.
You guys ever want to come to Ontario let me know....I'll tell you what to do with your ice box in the fridge.
You guys kill me.... Apparently it's not hot enough here in the North East where we just hit 100F..... so I thought I'd go to Arizona. I hear they hit 115F but they tell me that is dry heat. I always wanted to know what "dry heat" feels like, so I opened the stove, set it to 115F and stuck my head in there...... too bad the tickets are prepurchased for Arizona! Frick that's hot.
You guys ever want to come to Ontario let me know....I'll tell you what to do with your ice box in the fridge.
Julian
Julian, when you go to Arizona just wear a hat, some good sunglasses and light colored clothes. You will be fine. You might even get a chill. We were 105 here yesterday. Didn't even break a sweat. (It evaporates too fast!)
As for sticking you head in the oven, I will defer comment on that to Dan.
[This message has been edited by Rick 88 (edited 06-29-2012).]
Here is a brand new Mera option according to the seller. It apparently has a driver's side air bag as well as a current warranty. Unfortunately there are some missing parts and no real interior photos included which makes me a bit suspicious.
Here is a brand new Mera option according to the seller. It apparently has a driver's side air bag as well as a current warranty. Unfortunately there are some missing parts and no real interior photos included which makes me a bit suspicious.
i have an airbag in my steering wheel, too.......huh!
.............and according to that VIN its an SE model tooo, the plot thickens!!
and Rick, if i had an oven to speak of you would think, right?? but, i dont soooooo................. ;P
*edit* i ebaymailed the guy a request for more pics.......i wanna see them seats!!!
Dan,
I assume that your air bag is not functional but correct me if I am incorrect. I also requested additional pictures as well as info on the airbag but no response so far.
Here is a brand new Mera option according to the seller. It apparently has a driver's side air bag as well as a current warranty. Unfortunately there are some missing parts and no real interior photos included which makes me a bit suspicious.
Nice looking car, except for the wheels. They look like 19's which are too big for me on the Mera.
he added some pics.....that sticker is weird. but it looks closer to this than not wonder if its a nod to the evolution of the Mera ID sticker?? From Mera #7006 Indy-Resto-Guy
[This message has been edited by batousai666 (edited 07-01-2012).]