Pennock's Fiero Forum
  General Fiero Chat
  A Real Mera in Paradise (Page 14)

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version

This topic is 178 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178 
Previous Page | Next Page
next newest topic | next oldest topic
A Real Mera in Paradise by Fiero-in-Paradise
Started on: 08-18-2009 04:06 AM
Replies: 7119 (188033 views)
Last post by: Vernonmera on 07-27-2024 03:02 PM
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-13-2009 09:11 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:


ohhhhh... yeah. whoops, wait if #8046 is silver?




Yes

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-13-2009 09:16 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post

reholmes

920 posts
Member since Jul 2001
 
quote
Originally posted by Rick 88:


My wife and I were in Santa Fe two weeks ago. Stayed at the Inn on the Paseo. We had a great time exploring Canyon Road, and bought some really nice silver pieces from the Indian Jewlers on the Plaza. BTW the Margaritas at '"Tomasita's" will knock you on your a**. The Blue Corn Enchiladas at Maria's are great, but HOT!!


Stop it! Stop it!

Yeah, I have a couple on page two--one side-on and one of the interior.

Dick
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-14-2009 10:10 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-14-2009 04:54 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
man theres a lot of movies with Fieros.
I wanna see a race between a Lambo and FieroX on a supercar show. Top Gear or SuperCars Exposed any of them... and see if they would be interested. Problem is, if our FieroX wins it makes the $$$$$ cars look bad....The "its a Fiero" thing....
anyway if FieroX's challenge is accepted and he gets on, we,(I definitely) will show up, uninvited and beg to be on as an X supporter..
to get MeraX on there as well.....I want to meet the STIG....w/ his helmut on... that is my new goal...
ohhh...man, FIERO X -VS- the STIG......YEAHHHHHHHHHHHHHHHHHHHHH....SO AWESOME!
D

[This message has been edited by batousai666 (edited 12-14-2009).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-14-2009 04:57 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-14-2009 05:07 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:

FYI

http://austin.craigslist.org/pts/1508721225.html

Here they come...... but so soon?
this bring a question.
are Mera/308 splash off' molds a little bigger then said Mera org. mold.
that make sence?
their new mold is the size of our cars now? (hopefully).....soo the panel they sell is a panel thickness bigger, right?
ohhhh a clue.
Dan


IP: Logged
mera7
Member
Posts: 1355
From: piedmont oklahoma usa
Registered: Sep 2009


Feedback score: (1)
Leave feedback

User Banned

Report this Post12-14-2009 07:35 PM Click Here to See the Profile for mera7Send a Private Message to mera7Edit/Delete MessageReply w/QuoteDirect Link to This Post
dan my molds are actual mera panel molds, the molds listed on craigslist are ferrari 328 origin. likely will be some differences. mike in oklahoma
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-14-2009 09:36 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


Stop it! Stop it!

Yeah, I have a couple on page two--one side-on and one of the interior.

Dick


Found em.....nice car! What kind of wheels do you have on it?
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-15-2009 12:00 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Don't have the faintest idea--guess I could contact the previous (previous) owner--I bought the car from Paul V, who was a pass-through from Bob Anderson who owned the car for at least 10 years. I have looked for identifying marks, but couldn't find any. I will take a wheel off one of these days to check the back surface. they appear to be steel rims with cast centers. I'll take a pic and post it--maybe tomorrow.

[This message has been edited by reholmes (edited 12-15-2009).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-15-2009 05:48 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by mera7:

dan my molds are actual mera panel molds, the molds listed on craigslist are ferrari 328 origin. likely will be some differences. mike in oklahoma



hey Mike,
whats happening? welcome back.
understood that your molds are mera.
my question is for the "slash off" panels.
the word splash is misleading me to think that they are top molded off an old panel. so in my eyes they would be a panel thickness bigger.
in hindsight it is probabally not so.
got to go, later
Dan
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-15-2009 02:20 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Rick 88:

What kind of wheels do you have on it?


Here's a pic:



I'm pleased with the look, but don't know if they have any pedigree.
IP: Logged
PFF
System Bot
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-15-2009 08:39 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


Here's a pic:



I'm pleased with the look, but don't know if they have any pedigree.

They look like a Campagnolo, but it would be marked on the wheel like the Cromodoras. Please tell me where you got the center caps, and their diameter????? I neeeeed these!
IP: Logged
mera7
Member
Posts: 1355
From: piedmont oklahoma usa
Registered: Sep 2009


Feedback score: (1)
Leave feedback

User Banned

Report this Post12-15-2009 09:41 PM Click Here to See the Profile for mera7Send a Private Message to mera7Edit/Delete MessageReply w/QuoteDirect Link to This Post
those look like ferrari 308 rims or fiat bertone rims by campagnolo. if you take one off and look on the back it will be marked the size and bolt pattern and likely the maker name. mike in oklahoma

[This message has been edited by mera7 (edited 12-15-2009).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-15-2009 11:47 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Close but no cupie doll--though could be. Here is a Compagnolo from an early Scaglietti (plastic) 308

IP: Logged
Rodney
Member
Posts: 4715
From: Caledonia, WI USA
Registered: Feb 2000


Feedback score: (4)
Leave feedback





Total ratings: 267
Rate this member

Report this Post12-16-2009 10:38 AM Click Here to See the Profile for RodneyClick Here to visit Rodney's HomePageSend a Private Message to RodneyEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


Here's a pic:



I'm pleased with the look, but don't know if they have any pedigree.


There are probably Team III wheels. Made in the USA. Are they 15 or 16"?

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-16-2009 02:29 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
15". Judging from early photos, these wheels have been on the car since '93.

[This message has been edited by reholmes (edited 12-16-2009).]

IP: Logged
mera7
Member
Posts: 1355
From: piedmont oklahoma usa
Registered: Sep 2009


Feedback score: (1)
Leave feedback

User Banned

Report this Post12-16-2009 04:18 PM Click Here to See the Profile for mera7Send a Private Message to mera7Edit/Delete MessageReply w/QuoteDirect Link to This Post
rodney where could we find a set of those? thanks, mike in oklahoma
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-16-2009 04:27 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Rodney:


There are probably Team III wheels. Made in the USA. Are they 15 or 16"?




Team III, are they still in business?

Rodney how about posting a listing of Mera accessories you have for sale on this thread. You previously mentioned having Mera emblems and wheel caps, but I do not see them on you website. I would be interested in someone making "MERA GTS" brake caliper decals. Also, what else do we need to purchase and from where, in order to have a complete bumper assembly using your replacement front bumper?
IP: Logged
IMSA GT
Member
Posts: 10474
From: California
Registered: Aug 2007


Feedback score:    (8)
Leave feedback





Total ratings: 252
Rate this member

Report this Post12-16-2009 07:42 PM Click Here to See the Profile for IMSA GTSend a Private Message to IMSA GTEdit/Delete MessageReply w/QuoteDirect Link to This Post
I'm not going to butt in here too much but......
http://www.tyresave.co.uk/alloyjag.html
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-16-2009 10:32 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by IMSA GT:

I'm not going to butt in here too much but......
http://www.tyresave.co.uk/alloyjag.html


I wonder if they offer them in 5x100 also? Shipping might be a little pricey too.
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-16-2009 11:31 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Another interesting site--scroll about 3/4 down the page. Don't know if these are Compagniolo, but there appears to be similar stamp in the rim.

http://www.ferraripartsexchange.com/wheels.htm
IP: Logged
PFF
System Bot
Fiero-in-Paradise
Member
Posts: 540
From: Honolulu, Hawaii USA
Registered: May 2006


Feedback score:    (12)
Leave feedback

Rate this member

Report this Post12-17-2009 04:43 AM Click Here to See the Profile for Fiero-in-ParadiseSend a Private Message to Fiero-in-ParadiseEdit/Delete MessageReply w/QuoteDirect Link to This Post
Those wheels are interesting finds. Would probably require adaptors and hubcentric inserts, and then I wonder if the offset would be correct.

Interesting...if we assume that perhaps 100 Mera's are left on the road today, what happened to all those Chromodora rims that were special-made for the Mera? LOL...probably gracing a lot of 308 kitcars, I imagine. Once in a great while, you will see them pop up on e-bay, just like the original Vitaloni powered mirrors. I think I've seen the wheels twice in my on-line lifetime. I'm sure there are some sets just collecting dust out there somewhere in someone's garage or basement.

Now that it's winter (at least for you guys on the mainland) I'm hoping that more Mera owners will have the time to add to this thread and post pics of their cars. I know there are more Mera owners on PFF!

As for me, holding off on the grill work for now. Definitely on the things to do list, though. Still want to get mats, but I may have to just settle for lettering. The cost to add the Mera logo is just too cost prohibitive for one set.

I think my next project wil be one that Rick and I discussed off-line...redoing that plate thingy that is between the trunk and body, that covers the real tail lights. Mine is a one piece sheet of aluminum that was covered with what looks like black vinyl. Over time, and with heat, it has about a bajillion tiny air bubbles, so now it has an alligator skin texture. At first, I was thinking about redoing the aluminum sheet. But now I'm thinking of just leaving it in place, and instead using 1/4" plywood and naugahyde to make a nice padded cover that can just sit right on top of the aluminum sheet. Opinions???

Tom
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-17-2009 10:37 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
My "thingy" slides under the trunk compartment seal, if you added 1/4" of plywood it might be too thick. You can probably buy ready quilted Naugahyde, and I'm sure Trim Tack would hold it to the aluminum sheet.

Dick

Winter's tough, I've got to find someplace in Mexico to hibernate. Phoenix has been getting down in the thirties at night, and only 70s during the day--com'on summer! Fortunately in a couple months it will be here.
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-17-2009 11:21 AM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
Don't complain....It has snowed twice here in El Paso already!!!! My blood it to thin for this cold weather. I figured I'd go to Phoenix to hibernate. Although today the weather is really nice, and I am off..woo hoo!
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-17-2009 11:27 AM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post

Rick 88

3914 posts
Member since Aug 2001
 
quote
Originally posted by reholmes:

Another interesting site--scroll about 3/4 down the page. Don't know if these are Compagniolo, but there appears to be similar stamp in the rim.

http://www.ferraripartsexchange.com/wheels.htm


I like the look of the all magnesium competition wheels, (not the price). I wonder how our cars would look with the wheels powercoated to look like these. Then we could put a Mera "Scuderia" emblem on the front fenders.
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-17-2009 12:32 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by zigaroo:

<IMG src="http://img97.imageshack.us/img97/9215/fierologo6t.png">

Here's the second one with a black bg,

<IMG src="http://img98.imageshack.us/img98/3640/corporateconcepts.jpg">

You can get chrome vinyl and others, like carbon fiber for instance. You're going to want vinyl that has a 5 year life expectancy or longer.


Whoops, guess the images are gone--see page 7 at the bottom--guess you could bump that up here, I don't know how to.

I really like the one on the right. I wonder if you could get that made in the "puffy" vinyl to look like the cloisonnes that are on the earlier F-cars.

Yeah, it gets cold in El Paso, must be the elevation, but the sunny days make up for it.

[This message has been edited by reholmes (edited 12-17-2009).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-17-2009 06:19 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


Whoops, guess the images are gone--see page 7 at the bottom--guess you could bump that up here, I don't know how to.

I really like the one on the right. I wonder if you could get that made in the "puffy" vinyl to look like the cloisonnes that are on the earlier F-cars.

Yeah, it gets cold in El Paso, must be the elevation, but the sunny days make up for it.



I am sure someone could make them with the clear vinyl overlay, but I don't think it would be worth it for the few we would need. A vinyl decal could be produced in small quantities. Did your wheels come with the Mera emblems? They look like they have clear vinyl overlays.
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-17-2009 06:20 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
you guys better quit all your cold complaining. just kiddin. it was 11 DEGREES this morning with a brisk wind of 10 mph.
i don't even want to know what the wind chill factor was....
for me southern KY is snowless and warm. hell even Iowa gets way less snow. I love snow.
also nice to know ya' all have that alum. plate in back with the quilting....
mine has been out for months, easier to take pictures for questions/answers.
Later
Dan
P.S. an observation on the Cromodoras.... with the fact, early 87 Mera's did not have them rims.....
people seeking that "look" bought them for, either a percieved Mera OEM thing or a Ferrari look thing. Me 2 Cent.
ohhh just noticed its snowing on the post writing page.
even in a *EDIT* cool

[This message has been edited by batousai666 (edited 12-17-2009).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-17-2009 11:32 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Rick 88:


Did your wheels come with the Mera emblems? They look like they have clear vinyl overlays.


I've had the car only 3 months--haven't changed anything. I do have photos going back to '93, and these are the wheels that were on the car. I can take a closer look at the center cap, but don't know if I could tell how it was constructed.

Just looked--they do have a "plastic-y" feel to them.

[This message has been edited by reholmes (edited 12-17-2009).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-18-2009 09:51 AM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:

you guys better quit all your cold complaining. just kiddin. it was 11 DEGREES this morning with a brisk wind of 10 mph.
i don't even want to know what the wind chill factor was....
for me southern KY is snowless and warm. hell even Iowa gets way less snow. I love snow.
also nice to know ya' all have that alum. plate in back with the quilting....
mine has been out for months, easier to take pictures for questions/answers.
Later
Dan
P.S. an observation on the Cromodoras.... with the fact, early 87 Mera's did not have them rims.....
people seeking that "look" bought them for, either a percieved Mera OEM thing or a Ferrari look thing. Me 2 Cent.
ohhh just noticed its snowing on the post writing page.
even in a *EDIT* cool



The 87's were equipped with the stock lace wheels painted to match the car from everything I have read. The one owner 87 here in El Paso was purchased new with Compomotive wheels. The dealer had replaced the stock ones. They have a slightly different look from the Cromodoras much like the the 308 wheels pictures in this thread. However they are not painted, just natural aluminum finish.
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-18-2009 10:55 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Here's a set for sale--$1200

IP: Logged
PFF
System Bot
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-18-2009 11:14 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post

reholmes

920 posts
Member since Jul 2001
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post12-18-2009 04:02 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:

Here's a set for sale--$1200



That does not look like a Fiero.........
IP: Logged
mera7
Member
Posts: 1355
From: piedmont oklahoma usa
Registered: Sep 2009


Feedback score: (1)
Leave feedback

User Banned

Report this Post12-18-2009 05:24 PM Click Here to See the Profile for mera7Send a Private Message to mera7Edit/Delete MessageReply w/QuoteDirect Link to This Post
those look like oem mondial wheels but who knows. they are on a ferrari in the pic so i would assume they are 5x108 like almost all ferraris. mike in oklahoma
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-19-2009 12:10 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Right, these are OEM wheels, I think off a Testa. As for the pic, I've never seen a Testarossa/Fiero kit so I assume it's an F-car--at any rate I couldn't find a pic from a 308.

[This message has been edited by reholmes (edited 12-19-2009).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-20-2009 09:33 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
check these pictures out.
the stupid needle is going backwards. its 7 degs.



at least the sun was out.
.
.
.
.








these pics are for the last day of the fall photo contest thread you all should punch a Fall MERA pic of your own in today.
Meras, represent.
also theres a prize, a set of them GT wheel's i have been wantin'. I gotta win.
later
Daniel
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post12-20-2009 10:20 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
Wish I had your barn--without the snow!

OBTW, nice car,

Dick

[This message has been edited by reholmes (edited 12-20-2009).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-23-2009 04:31 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
how'd we get on page 3?
i'll fix that
ctrlV

thats better.
D

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-23-2009 04:37 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
 
quote
Originally posted by reholmes:

Wish I had your barn--without the snow!

OBTW, nice car,

Dick




looks like we need an old fashioned barn raising in AZ. i'll put on my bibs and fetch the horses.
you supply the moon and AZ sun-shine. we get at 'em, done. .
say maybe around Feb. 3rd or so. This is when the "winter blahs start for me.
Dan

[This message has been edited by batousai666 (edited 12-23-2009).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post12-23-2009 04:56 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
since we are on the subject of garages....I was thinking of turning my carport into a
garage with a roll up door on the face here. maybe even 2, for the drive thru effect. YEAH!


with an automatic swinging barn type door here



that will enclose it on two/three sides with the house in the back for a "final wall".
throw up a fence from the carport to my side neighbors fence.
enclosed the back yard of the house, for a car corral.
this will allow me to get 3 or more cars sheltered/purchased, because this here


holds 3 even possibly 4.
wonder if the Mera would fit in the workshop????
so many ideas and no time till the next lay off.
Later
D

[This message has been edited by batousai666 (edited 12-23-2009).]

IP: Logged
Previous Page | Next Page

This topic is 178 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178 
next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock