^^^^^we were just talking about that in another thread.^^^^^ i have a couple E mails from the seller. he says its Mera #7029. its on sale to in Feb. he wanted $12,800 seems Meras are hot items....since i got Mine 4-5 have gone to block....i thought these are rare cars!?Kidding... D
[This message has been edited by batousai666 (edited 05-07-2010).]
been working on my custom semi-pickup truck...almost finished. working on monster truck daily.... maybe in a few wks i can get back on the mera a little more seriously
been working on my custom semi-pickup truck...almost finished. working on monster truck daily.... maybe in a few wks i can get back on the mera a little more seriously
is the semi-pick up, one of them huge F-750 types?? those are cool. Mike, do you have a test track in your backyard for all your "toys"?? i wanna come out and play! Dan
hey dan, yes its the chevrolet version called a kodiak k7500. its a huge 4x4 pickup truck, 502hp 600ft lbs of torque. its my tow rig for the monster truck.
hey we found another Mera with speaker seats. the $23,000 Mera #8122 for sale thru MidwestClassics.net. thing is it has multi-Mera accessories...that go with the sale. emblems, 2 slat grill, mirror and switches. it has it all. even the org. "fattie" front bumper.Dam! Dan
[This message has been edited by batousai666 (edited 05-10-2010).]
making my qtr sail panels like a 308 part grill part glass. making my headlights like a 308 in the front nose. looks like a stinger now but still is a mera by vin. cool
Don't forget, I want to do the headlight cover mod also. Let see pics of the sail panels too.
hey dan, one of the tornados was within about a mile from my house. between banner rd and hwy 81 tornado. but we are fine. we have a tornado safe room in our house.
safe room is a steel room underground with steel ball bearing locking lid supposedly 10-12 people will fit in the one i have. its just me my wife and 8yr daughter, 4 dogs and the mera molds lol.
not bad. if i had a job, i'd offer $6000. and park Mera X, to destroy these two first. the V8 already screams....break me.
glad you are "all" still there in OK, Mike. i saw the morning radar and said to myself, "damn"! you are the only person i know in OK and it took a minute to realize i DO know someone in this state. and you say that it was 1 mile away. . i have always wanted to see a tornado, now i know where to come.
we had a tornado cut thru DownTown Kalamazoo, MI in 1980. my Dad was in it. he worked at the Post Office at the time. pretty awesome. my Mom, little Brother and I were down there like 1 hour after it happened too pick up him up. his car got lifted up 20 ft. rolled, flipped and let back down on the tires. beat to piss. it also ripped the face of the Gilmore Buliding off. soo powerful.
anyway, glad to hear you and your Family are good. Dan
[This message has been edited by batousai666 (edited 05-12-2010).]
It appears the door skin may be mounted too close to the black plastic piece on the drivers side. Are the Mera door skin panels adjustable?
i dont think so. well, maybe with some washers (1or2) something behind the Bolt/screw that holds on the panel, in that area only. these are guesses. i have not looked into my doors, yet. my passenger side door, the handle is higher than the Drivers side so it is harder to open. gotta get up in there to open. hurts my whiddle finnners......maybe today. it is still cold up here. Temp gauge says 40 degrees. Dan
Don't forget, I want to do the headlight cover mod also. Let see pics of the sail panels too.
Big Mike? are they going to be something like this??
or like this?? maybe??
i think this ^^^^^ is the Stinger style.
i am looking too get the last 7 or so louvers in "glass" -plexi or what have you too get rid of the wodd on the passerger side. i have a verbal confirmation for some summer employment....so i will have some spending cash...thinking about your 308 spoiler also. Mera X need some black back there. also thinking about a Fiero Tail......wonder if it would fit across. I<----->I. nice and low. just like the GT "whaletail" i believe its called.
D PS Mike if my employment holds this time i will be over to get "My" LS engine, which better be in the SafeRoom also......JK
[This message has been edited by batousai666 (edited 05-12-2010).]
yeah this little guys been around the block for a long time.....if i remember correctly it started out as an AutoTrader or Craigslist then went to Midwest (i think they took a bath on this one)...now to Ebay. shucks howdy!!! it does have all the Mera stuff. the bumper looks brand new. multipel switches, badges for the wheels and hood. 110,000+ miles for $10,000 maybe....i dont know 110,000..... 2 slat grill.....STICKER!!!....glad i dont have a job,yet later Dan
[This message has been edited by batousai666 (edited 05-12-2010).]
see what you made me find Richard? man, some people i think it the same car (Stinger) from the Pictures above. wonder if its still for sale? the post is Feb of 2010. http://www.youtube.com/watch?v=ZwclqF5oUmQ
D
[This message has been edited by batousai666 (edited 05-13-2010).]
Originally posted by batousai666: i dont think so. well, maybe with some washers (1or2) something behind the Bolt/screw that holds on the panel, in that area only. these are guesses. i have not looked into my doors, yet. my passenger side door, the handle is higher than the Drivers side so it is harder to open. gotta get up in there to open. hurts my whiddle finnners......maybe today. it is still cold up here. Temp gauge says 40 degrees. Dan
My drivers side door is the harder of the two to open. Does anyone know how the handle is set up inside the door panel? Pics? Can we adjust them?
the qtr sail panels i am working on will look like real fcar 308 part glass part grill. also am doing a headlight and front hood mod that will look like real fcar 308. lights will be infront of hood and hood will be narrower and have wiper notches in it. other than that leaving mera alone body looks wise.
My drivers side door is the harder of the two to open. Does anyone know how the handle is set up inside the door panel? Pics? Can we adjust them?
after seeing the cut out under the Arm rest....this will be my plan of attack into this issue.....i have seen a video where a 308 "KIT Car" Manufactuer used bondo to hold the handles in the handle opening!? in my opinion not very adjustable..the door panel may be able to be "shimmed" some how. for the rubbing prob.
with driving season HERE!!!! i am still more worried about my Temp gauge....on this subject... anyone know if i can go to AutoZone and get their aftermarket electric Temp gauge??? i am worried about the engine sensor?? will it be adaptable to a 22 year old car??? going to push Mera X to Grand Rapids, MI this weekend (50 miles one way) too see if it will make it. its a charity car show.....may as well attempt it for a good cause. i need to set a base line for the 2.8 if i am stuck with it for awhile. uuuuhhhhh.....more to follow Dan
[This message has been edited by batousai666 (edited 05-13-2010).]
My drivers side door is the harder of the two to open. Does anyone know how the handle is set up inside the door panel? Pics? Can we adjust them?
Rick,
You might start here http://tinyurl.com/29y93cc --the pics are gone, but perhaps "Fieroboom" still has them around somewhere. Of course, these are from a regular Fiero door, but they may help.
Dano, what's the problem with the temp guage? If the sender uniit, I have a spare you can have.
If its the plastic connector, mine cracked on my Fiero a while back, so until I get a new connector, I just broke off the plastic connector completely with pliers. It was very brittle. The female connectors were still attached to the wires, so I just wrapped them with a little electrical tape and stuck them back onto the sensor terminals. Not sure if it makes a difference, but I made sure each one went on the way they are suppose to. Temp guage still working after all this time.
As for that door handle, from the videos I've seen, the door handle is epoxied onto the inside of the Mera door skin, so its impossible to adjust. Also takes two people to remove and install the panel...one to hold the panel, and another guy has to become Houdini and reach in with his arms to connect it to the rod as the panel is being removed/installed.
Originally posted by Fiero-in-Paradise: As for that door handle, from the videos I've seen, the door handle is epoxied onto the inside of the Mera door skin, so its impossible to adjust. Also takes two people to remove and install the panel...one to hold the panel, and another guy has to become Houdini and reach in with his arms to connect it to the rod as the panel is being removed/installed.
Appears to me that the interior door panel is stock Fiero with the "filler" sill attached to the panel. I would think that removing this panel--it's not hard to do on a stock Fiero--would give a pretty good view of the mechanics of the exterior door handle--IMHO ;-)
I recently replaced the dew wipes and passenger side window motor on my 87 GT--removal of the interior door panel was the easiest part.
morning all. Tom, my gauge is all over the place and i need a new one. i am just being lazy. actually i wish i could have both, one as a back up. plus, i do not want to break anything. the brittle plastic scares me. i cant DO gentle... i have a line on a aftermarket one so i will be looking into this, today.
now to the dew wipes. are you guys going to try to get the wipes up higher, to the top of the door? outside panel?? i see the Org. Fiero wipes as a water trap as is. i do not even think about driving X with even the slightest hint of rain.
also i should be into my door panel by Noon..... Dan
[This message has been edited by batousai666 (edited 05-14-2010).]
Appears to me that the interior door panel is stock Fiero with the "filler" sill attached to the panel. I would think that removing this panel--it's not hard to do on a stock Fiero--would give a pretty good view of the mechanics of the exterior door handle--IMHO ;-)
I recently replaced the dew wipes and passenger side window motor on my 87 GT--removal of the interior door panel was the easiest part.
This sounds like the most logical idea. I have never tried to peer in the slot you have to reach into to see how the handle is mounted. It is just one of those "Mera Mysteries". My wife thinks the door handles are a joke anyway. She thinks I should take a hint from the lowriders an put "poppers" on the doors
the qtr sail panels i am working on will look like real fcar 308 part glass part grill. also am doing a headlight and front hood mod that will look like real fcar 308. lights will be infront of hood and hood will be narrower and have wiper notches in it. other than that leaving mera alone body looks wise.
If you ever decide to make a set of stock Mera headlight covers to mimic the 308 look with the first five or so louvers made flat, I would like to buy some.
Check out these video clips. About 9 mins into #3 will show you how our door handles and locks are most likely mounted on the inside of the fiberglass door skin. The beginning of Clip #4 will show the Houdini act when mounting the door skin.
you know, in my opinion, these vids are not Meras?? these vids are what NOT to look for in/on your Mera.
these vids started me questioning my Mera.....now i find the Bondo.
i think its weird that i have 2 keys for the doors. One for the Rear Deck and one for the DR/PASS doors. the pass door does not unlock. but locks from the outside..i do not like this.
in this issue i hope i am TOTALLY WRONG!!! but letting my record speak for itsself i believe......AWWWW, SHUT UP, RECORD!
as far as i know this vid is filmed in 1989 from Florida....at least that is what it says in this sites archive search on this topic. this video is scary if one does not have a sticker...... later Dan
[This message has been edited by batousai666 (edited 05-15-2010).]
considering taking MeraX to breakfast for our Anniversary.... i was giving him a good going over, wait did i refer to X as him...... uhhhh, anyway found this rubber piece needed to be taken apart for a little peepin'
notice the red arrow points to the bolt end on the inside, pointed in not out. mine 'tis not like in the FieroNews dl's. COOL! also seem like the videos reflected a mad butcher behind the grinders. i witness some "massaging" of the metal in my door handle, but not an outright slaughter. i DO have mounting plates, like they do. cept they look different. gotta watch that again later D ohh.....yeah as far as adjusting the handle?? i think maybe....if i bend that plate down/in i think it will help me. in my case i also need the passenger side handle to move 1/2 inch to the left if looking at the door. if i stay to the far left with like 2 fingers its way easier to open than if i try to "center" my fingers. all 4 in the hole on the handle..sa'right??s'allright!
[This message has been edited by batousai666 (edited 05-15-2010).]