right on.....super good info. thanks Leeezard!

SoloTwo....its all good. in due time.
i got Brighton MI this weekend, to go see the Lingenfelter Collection at a charity show.

but next weekend is free unless work calls. so lets pencil in a day of your choice, Sat. or Sun. and i can meet you half way in the least. maybe the casino for brunch or something! dig it. its up to you cuz i have nothing but time so what ever is convienent for you.....not too late like 5 pm or something is my only other request!

check this out! for sale, 100 feet from my driveway! just showed up yesterday. theses a story i am sure. so we will see

[This message has been edited by batousai666 (edited 06-14-2013).]

Let me check. I have to get the rack in and lower ball joint. I'll let you know.

sure is hard to believe that the same guy who owns these......




owns this too


less that 13,000 miles

[This message has been edited by batousai666 (edited 06-19-2013).]

Where is this collection at? He undoubtedly has good taste.

quote Originally posted by solotwo: Where is this collection at? He undoubtedly has good taste.

its in Brighton, MI in an industrial park.....huge warehouse

Here is another 3800 in West Michigan. https://www.fiero.nl/forum/Forum4/HTML/066389.html

[This message has been edited by solotwo (edited 06-21-2013).]

soooo last week,
i show up to a different parking lot in the huge Portage Pfizer Manufacturing Megaplex.....and i find this @6:45 AM!!
UNCANNILY UNREAL...how all these Fieros are following me around, no??

quote Originally posted by solotwo: Here is another 3800 in West Michigan. https://www.fiero.nl/forum/Forum4/HTML/066389.html

as far as this i got $1000 maybe. we'll see

[This message has been edited by batousai666 (edited 06-28-2013).]

Installed a rack this weekend and what a difference! The old rack must have been bad from the get go! Car now feels like I have power steering! The clunk is gone! The binding is gone.

quote Originally posted by solotwo: Installed a rack this weekend and what a difference! The old rack must have been bad from the get go! Car now feels like I have power steering! The clunk is gone! The binding is gone.

sweet, keep pluggin away....the Casino we must meet!!


i sooo had my way with this today at the local LKQ!
manual drivers mirror, controller and all the whole shebang, front hood latches, a trunk gasket for the Mera.
lets see.....ohh ashtray covers for the Mera, silver gearshift silver surround. Old school Radio. AC Delco cassette
the engine louvers dont fit tho.....but thems were free so no harm....goode times


gettin me fixin on, too. got some headlight bracket and cover fixins.

2 birds one stone and have a 85 motor i cant use. anybody??


..............and got me some emblems too ohhh yes!!! FREE!!!
i use the Grand Am SE to make M-E-R-A emblems for..... well, my Mera



telegraph ones moves much?? eh??

GETSOME!!

[This message has been edited by batousai666 (edited 07-01-2013).]

Hey let me know what you need. I have a few extra parts.

danno, did you at least use Vaseline on the tail pipe when you had your way with her? lol

quote Originally posted by LEEEZARD: danno, did you at least use Vaseline on the tail pipe when you had your way with her? lol

nope....just left blood everywhere!
MINE!

dig this. the lighting sucks so i used a flash....but


yeah. nice....all stealthly under the streetlights.


ding ding ding!!!!

[This message has been edited by batousai666 (edited 07-02-2013).]

picked up the door sil badges at the junkyard!
just been playing around....not the final.


i will start low key. i think this will be good, for now. subtle but telling

[This message has been edited by batousai666 (edited 07-04-2013).]

batousai666 Do you still need a steering wheel for the Mera?

awww man!!!


torrental down pour and i hydroplane into a fire hydrant boooooo!
total 50 ft pool of water collected in 3-5 minutes and i got sucked into it and pulled right in.
sonofaa................cracked up my OEM blue hood so i guess i strip the black off and hang it on the wall, now.
thanks to WhatAboutBob i got a red one i can use as a replacement.
!!thanks BOB!!

We just got that downpour here in Lowell. Do your lights work up & down? You may have some damage under the front end. That happened to me with the red 88 coupe. Looked ok from the outside, but bent the metal frame enough that the light would not go down. I hope it is minor damage that you have. Do you need the steering wheel for the Mera?

quote Originally posted by solotwo: We just got that downpour here in Lowell. Do your lights work up & down? You may have some damage under the front end. That happened to me with the red 88 coupe. Looked ok from the outside, but bent the metal frame enough that the light would not go down. I hope it is minor damage that you have. Do you need the steering wheel for the Mera?

you may be on to something here.......in comparison to the 2 sides i think i may have a problem

as far as a steering wheel for the Mera why yes, if its the SE version with the horn paddles most definately i would be interested.
sorry i missed the first time you asked...

[This message has been edited by batousai666 (edited 07-09-2013).]

I sent you a pm

Are you going to the barns tonight?

quote Originally posted by solotwo: Are you going to the barns tonight?

nope....i am going to pull off my front facia to see how bad i banged that hydrant.
it looks bad why are you??

i might be able to hold off till the weekend if you were thinking about going........let me know

I would like to, but I have to sell some vehicles. This month sucks.

quote Originally posted by solotwo: I would like to, but I have to sell some vehicles. This month sucks.

thanks for the reply.....that sucks, i hope you make a few sales quick

does this look bad??? what do you think? can it be fixed?? i hope so

What does it look like under the light?
Here's a pick of my cars damage.

Can you see under the light the metal was pushed back enough so that the light would not go down.

[This message has been edited by solotwo (edited 07-10-2013).]

shes buckled pretty good there in the sub structure dan. you will need to pull or pound it back straight to make it right again.

thanks for the input. i got a problem in front and underneath. i see a bunch of spot welds and hope those flat pieces are buy able parts the main pillar by the turn signal i thing i can pull and pound back. i got to find a good picture or two of naked frames and take off my front fascia. you know there is a $700 OEM 87 Blue Fiero foer sale i could just snap up them panels and swap em over, knowing my RPO sheet will back me up!

this wake up call may have a silver lining after all

Ouch! Man that sucks. It did rain a lot at once yesterday. The car does look fixable.

quote Originally posted by FieroMaster88: Ouch! Man that sucks. It did rain a lot at once yesterday. The car does look fixable.

thanks for the cheer up......i worked a bit yeasterday and got it pounded out pretty good.
theres a bunch of pan metal all bunched up in a scroll i may have to cut out.
pounding back the hood hinge mount is being a pain......but all the time i am poundin and streaching with cro-bars and i did not notice the coolant leak out the drivers side tube
its all drained out ................boooooo

[This message has been edited by batousai666 (edited 07-14-2013).]

quote Originally posted by batousai666: thanks for the cheer up......i worked a bit yeasterday and got it pounded out pretty good. theres a bunch of pan metal all bunched up in a scroll i may have to cut out. pounding back the hood hinge mount is being a pain......but all the time i am poundin and streaching with cro-bars and i did not notice the coolant leak out the drivers side tube its all drained out ................boooooo

good job finding the leak before you drove it

[This message has been edited by LEEEZARD (edited 07-14-2013).]

well, when one looks at it like this.....WOW!!
MAN, this sucks

batousai666 do ya need some help? I am currently unemployed. I have a honey doo list but that gets old. LOL.

Hey may we should see about getting all the west Michigan/southwest and southeast and northern Michigan fiero people over to help ya. Oh don't want to forget Northern Indiana and North West Ohio people either. Have a "get the black beauty on the road working party" ??

Any way I sent you a PM.

[This message has been edited by solotwo (edited 07-23-2013).]

Hey bat I sent you a PM with an idea!

well if i go blue i have to go with the 1987 factory blue. i am kooky that way
i am fixin BlackDynamite for a "daily driver" and currently lookin for something faster
i hear tons of OT are about to begin at work and i will strike again!!

i think turbo!! i need them Fast 3800 Flint Boys to sell me something
yeaaaaaaaah
thanks for the heads up tho, Solo!!

[This message has been edited by batousai666 (edited 07-26-2013).]

Batousia666. I manage to finish getting new spark lug wires installed . Shazamm that little bugger goes now.

quote Originally posted by solotwo: Batousia666. I manage to finish getting new spark lug wires installed . Shazamm that little bugger goes now.

thats good to hear......now give 'er the beans!!

so i got sick of waiting around to align the hood.....so i buttoned it back up and will go hoodless
until i am informed of its legallity from the boys in Blue Peeeeown!!
getyasum!! BlackDynamite is on the road again!!

[This message has been edited by batousai666 (edited 08-27-2013).]

Glad to hear that,

have fun with it danno. I recently talked to some of the okc fiero guys. they like the 4t65e auto with a powerful engine. you could go ls4 or something.