...

[This message has been edited by tshark (edited 09-07-2018).]

Funny, I just created a thread asking the same question

....

[This message has been edited by tshark (edited 09-07-2018).]

As you can see from the pic it is closer on the left side....Just opposite from the inside.

...

[This message has been edited by tshark (edited 09-07-2018).]

You got this from the Fiero Store? Both of them that I have received from them was in one single piece.

Anyhow, I cheated. I did not want to take the bumper off to get behind there to attach the nuts. I used the same red backed 3M tape that holds the quarter windows on. I put a strip on the back of the GT logo, and pressed it into place. It is not going anywhere

This was a photo of my rear bumper before I installed the logo:



<--- Drivers side [===================[-o----G T----o-----] ---> passenger side

[This message has been edited by JohnWPB (edited 10-14-2014).]

quote Originally posted by JohnWPB: You got this from the Fiero Store? Both of them that I have received from them was in one single piece. Anyhow, I cheated. I did not want to take the bumper off to get behind there to attach the nuts. I used the same red backed 3M tape that holds the quarter windows on. I put a strip on the back of the GT logo, and pressed it into place. It is not going anywhere

John, PM sent.....

Thanks, John.