I've offered parts for years and finally have a website, all items on the website are in stock. Brake swap parts, low profile headlight buckets, 3800 swap parts, ect
ne=new england? you should mention that to use the brake kits they will have to have hubs made. great prices though.i wonder where i could get rotors redrilled.
i was wondering how you used third gen callipers on the 11.25 set but now i see the sliders.
[This message has been edited by richard in nc (edited 03-20-2024).]
The guy has some really nice stuff there on his website. What I would suggest if he would add descriptions on how to use some of his parts. For instance if you buy the Corvette C4 brake swap bracket kits for front and rear it would be be nice to know what Rotors to use, the MC, caliper and the machining required. I also assume that the parking brake is omitted with this sawp and 17:" wheels would need to be used as a minimum.
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
[This message has been edited by Dennis LaGrua (edited 03-26-2025).]
The guy has some really nice stuff there on his website. What I would suggest if he would add descriptions on how to use some of his parts. For instance if you buy the Corvette C4 brake swap bracket kits for front and rear it would be be nice to know what Rotors to use, the MC, caliper and the machining required. I also assume that the parking brake is omitted with this sawp and 17:" wheels would need to be used as a minimum.
For the 12" c4 brackets he specifies what calipers and rotors, the rear use rear calipers with parking brake, doesn't say what MC, more info could be useful, but for being a short limited description, it is pretty good, I would assume (hope) more instructions would come when a purchase is made.
Originally posted by sluppy123: I've offered parts for years and finally have a website, all items on the website are in stock. Brake swap parts, low profile headlight buckets, 3800 swap parts, ect
Brian (sluppy123 - Fierospace) did the engine swap in the GBCT. And also converted my Formula (Rare88) to E85. He's an oustanding person and incredible skilled person in his product and experience with Fieros. I was very lucky to have him be close to m and able to do everything he did for me. His work speaks for itself!
------------------ 88 Formula - 3800SC/4t65eHD 88 Coupe - 3800SC/4t65eHD GBCT - 3800SC/F23
The dickmen one doesn't allow you to put the sunroof away in the frunk
