Want a nice decal for you car, window, business, house? I can make you some. I have a vinyl cutter, but not a printer. I use colored vinyl and can either leave them as one solid color, or I can layer them. They stick pretty well using vinyl that can last for about 5-6 years. If you would like a design made you can send me a PM here and I'll give you my e-mail and send me the design ready (or I can make you one if you know what you want in mind) with what color of choice, dimension sizes, and quantity. Prices range depending on how much material I use.
The largest I can go is 23 inches high for Holographic bubble, black, white, Gold Chrome, "Carbon Fiber", Teal, Arctic Blue and Burgundy. As for the other colors I buy them in 15 inch rolls and can cut a maximum of 14 inches high. If there is anything bigger than the size I mentioned, I might have to do your design in sectioned pieces.
The available colors I have are:
Red Regular Pink Flex Blue Arctic Blue Silver Chrome Lime Tree Green Cactus Green Bright Yellow Violet Black White Teal Light Orange Carbon Fiber Chrome Gold Cobalt Blue Ultra Fine Metallic Burgundy Red Ultra Fine Metallic
I can get other colors, I'll just have to order them.
I also have made a FB page of the work I've done, anyone can contact me there too about what you want. You can also see the current colors that I hold on there too.
------------------
[This message has been edited by KenFormula88 (edited 06-25-2013).]
Ken, how big can you go with decals? I would love to support a fiero guy, and i need a big decal for my window at my business. Its a Compass rose, and it would be about 36X30... I know, kind of big. If you cannot do it, I may still commission you for other stickers, small stuff, in the future.
Ken, how big can you go with decals? I would love to support a fiero guy, and i need a big decal for my window at my business. Its a Compass rose, and it would be about 36X30... I know, kind of big. If you cannot do it, I may still commission you for other stickers, small stuff, in the future.
Yeah I can't do anything larger than 23 inches. My cutter is only a 24 inch, minus the two 1.5 in rollers it needs to apply pressure and guide the vinyl through.
You can make it in sections. When I did my Hooters stock car, a sign shop did all my lettering in punched out vinyl. He did the owl that covered the hood in 4 sections and it worked out great.
Sorry this was the best one I could find of the hood....
i work with a group that save dogs from high kill shelters . how much would 5 be that said www.hope4paws.com maybe 8 inches tall (only a guess never had any made before ) want to put in back window of cars to try to get some more web support . can be in 3 parts and looking for bright colors . maybe need more there is about 30 to 40 peaple who work with the group and im sure some will want them after they see them
[This message has been edited by fierobrian (edited 11-28-2012).]
i work with a group that save dogs from high kill shelters . how much would 5 be that said www.hope4paws.com maybe 8 inches tall (only a guess never had any made before ) want to put in back window of cars to try to get some more web support . can be in 3 parts and looking for bright colors . maybe need more there is about 30 to 40 peaple who work with the group and im sure some will want them after they see them
You just want the web-site address only? If so the dimensions will be 8"x1.5". What you mean in 3 parts. Like the address in separate colors, or put the address together like a puzzle? Bright colors I have are Chrome, Yellow, Lime-Tree Green, Arctic Blue, Bright Red, Silver, Pink and Holographic Bubble.
i was thinking like www. hope 4 paws .com would all be differnt colors not to worried about color as much as cost so if you have some scrap in differnt color and it will be cheaper that is all the better ithink a little biiger also so it is easy to read maybe 8 inches tall and how every wide it needs to be
[This message has been edited by fierobrian (edited 11-28-2012).]
I'll shoot you a PM as well, but I am definitely in the market for some. The old ones on my cars aren't doing to well, need some new ones! I'll have to work up some images for ya
I'll shoot you a PM as well, but I am definitely in the market for some. The old ones on my cars aren't doing to well, need some new ones! I'll have to work up some images for ya
Sweet, can't wait!
Also, here is just a little update of the little things I've did.
I have a vinyl cutter, but not a printer. I use colored vinyl and can either leave them as one solid color, or I can layer them. They stick pretty well using vinyl that can last for about 5-6 years. If you would like a design made you can send me a PM here and I'll give you my e-mail and send me the design ready (or I can make you one if you know what you want in mind) with what color of choice, dimension sizes, and quantity. Prices range depending on how much material I use.
