stevenrossi Im lookin for one of these wings have you got one at the yard
Joe, I used to have one of those Firebirds, with that exact wing. Be aware that the wing in that pic is attached to clips that run along the side edges of the glass. If you mount that wing to a plain hatch, it won't have the clips. They're part of the hatch molding. Also be aware that the wing is made of soft urethane, and tends to crack. At least mine did. I'm sure you can work around all of that, but I wanted to save you the "surprises".
Isn't there something else you could use? I've been watching this project for awhile and love where the car is going. I was just worried that it was getting maybe alittle too Daytonaish. But whatever, it's your car, I'm just trying to heighten my vicarious experience. Oh, by the way, I'm jealous.
But really, you should come up with some lower side skirts with a scoop or something, and and chin spolier and a rear diffuser.
since this project is taking alot of space on the 4.X site I have made a new site just for this project with more pics and alot more space here is the link
Isn't there something else you could use? I've been watching this project for awhile and love where the car is going. I was just worried that it was getting maybe alittle too Daytonaish. But whatever, it's your car, I'm just trying to heighten my vicarious experience. Oh, by the way, I'm jealous.
But really, you should come up with some lower side skirts with a scoop or something, and and chin spolier and a rear diffuser.
you reading my mind the lower skirts are in the works and will have side scoops to match the uppers
here is the pic of the finge mount for the glass and also the latest progress deck lid so far now all that I have to do is bond it to the camaro hatch as you can see the Camaro deck has had the uper skin removedup to 3 inches from the glass so the fiero deck can be sliped under the outer skin to hold it in place for bonding
only have 2 hands can't work any faster want to come over and help
I , myself i should NEVER, EVER, NEVER, EVER tell anyone to hurry... I apologise!! Bubba... man I am at a lost of words for this project!! It is going to be REALLY scary to pull up behind you at a red light and see that N* staring at you... <---- thats what the ricer that is behind you... lol
madcurl as I made the rear easy to remove I am looking for a rear glass that has no defrost lines there is one not far from me and waiting for the owner to scrap the car as he said I could have it when the car goes to the bone yard
why not just pull the defroster off that hatch? i ripped mine of the fiero not to long ago w/ only a razor blade. im digin' the hatch over the N*. Im still worried about you sucking up air thats in the 200* range w/ that hatch on there. i know that there will be fresh air coming in the vents and from the bottom of the car but still those intakes are close to the glass and the area close to the glass is going to be the hottest. atleast you can drive it in the rain now and not worry about get water in your carbs
[This message has been edited by TaurusThug (edited 11-04-2004).]
<---- thats what the ricer that is behind you... lol
